Single pilot IFR operating problems determined from accidental data analysis

The accident reports examined were restricted to instrument rated pilots flying in IFR weather. A brief examination was made of accidents which occurred during all phases of flight and which were due to all causes. A detailed examination was made of those accidents which involved a single pilot which occurred during the landing phases of flight, and were due to pilot error. Problem areas found include: (1) landing phase operations especially final approach, (2) pilot weather briefings, (3) night approaches in low IFR weather, (4) below minimum approaches, (5) aircraft icing, (6) imprecise navigation, (7) descending below minimum IFR altitudes, (8) fuel mismanagement, (9) pilot overconfidence, and (10) high pilot workload especially in twins. Some suggested areas of research included: (1) low cost deicing systems, (2) standardized navigation displays, (3) low cost low-altitude warning systems, (4) improved fuel management systems, (5) improved ATC communications, (6) more effective pilot training and experience acquisition methods, and (7) better weather data dissemination techniques

Genetic algorithms: a pragmatic, non-parametric approach to exploratory analysis of questionnaires in educational research

Data from a survey to determine student attitudes to their courses are used as an example to show how genetic algorithms can be used in the analysis of questionnaire data. Genetic algorithms provide a means of generating logical rules which predict one variable in a data set by relating it to others. This paper explains the principle underlying genetic algorithms and gives a non-mathematical description of the means by which rules are generated. A commercially available computer program is used to apply genetic algorithms to the survey data. The results are discussed

Influence of controlled fluid shear on nucleation rates in glycine aqueous solutions

The nucleation of glycine was investigated in supersaturated aqueous solutions exposed to well-controlled fluid shear under isothermal conditions. Shear rates between 25 s-1 and 1000 s-1 were studied using Couette and capillary flow devices. Induction times were obtained from imaging, transmission and scattering measurements, or visual monitoring. Great care was taken to eliminate any seeding in order to avoid secondary nucleation preceding formation of first crystals through primary nucleation. The observed induction times of sheared solutions were considerably lower than those of unsheared solutions. Increasing the average shear rate was found to reduce the mean induction time through a power law relationship. A detailed statistical analysis showed that the number of experimental repetitions used was sufficient to obtain statistically significant trends for the system studied. Induction times appeared to closely follow a probability distribution based on a previously published model of Jiang and ter Horst. Using their model, where the induction time is related to the rate of formation of primary nuclei and the time it takes them to grow to the size where the secondary nucleation becomes significant, it was found that both the primary nucleation rate and the growth time were strongly dependent on the shear rate imposed

The effect of (Ti + Al): V ratio on the structure and oxidation behaviour of TiAlN/VN nano-scale multilayer coatings

Nano-scaled multilayered TiAlN/VN coatings have been grown on stainless steel and M2 high speed steel substrates at U-B = - 85 V in an industrial, four target, Hauzer HTC 1000 coater using combined cathodic steered arc etching/unbalanced magnetron sputtering. X-ray diffraction (XRD) has been used to investigate the effects of process parameters (Target Power) on texture evolution (using texture parameter T*), development of residual stress (sin(2) psi method) and nano-scale multilayer period. The composition of the coating was determined using energy dispersive X-ray analysis. The thermal behaviour of the coatings in air was studied using thermo-gravimetric analysis, XRD and scanning electron microscopy. The bi-layer period varied between 2.8 and 3.1 nm and in all cases a {1 1 0} texture developed with a maximum value T* = 4.9. The residual stress varied between -5.2 and -7.4 GPa. The onset of rapid oxidation occurred between 628 and 645 degreesC depending on the (Ti+Al):V ratio. After oxidation in air at 550 degreesC AlVO4, TiO2 and V2O5 Phases were identified by XRD with the AlVO4, TiO2 being the major phases. The formation of AlVO4 appears to disrupt the formation of Al2O3 which imparts oxidation resistance to TiAlN based coatings. Increasing the temperature to 600 and 640 degreesC led to a dramatic increase in the formation of V2O5 which was highly oriented (0 0 1) with a plate-like morphology. At 640 degreesC there was no evidence of the coating on XRD. Increasing the temperature to 670 degreesC led to further formation of AlVO4 and a dramatic reduction in V2O5. (C) 2003 Elsevier B.V. All rights reserved

Methodologies for the design of LCC voltage-output resonant converters

Abstract: The paper presents five structured design methodologies for third-order LCC voltage output resonant converters. The underlying principle of each technique is based on an adaptation of a FMA equivalent circuit that accommodates the nonlinear behaviour of the converter. In contrast to previously published methods, the proposed methodologies explicitly incorporate the effects of the transformer magnetising inductance. Furthermore, a number of the methodologies allow the resonant-tank components to be specified at the design phase, thereby facilitating the use of standard off-the-shelf components. A procedure for sizing the filter capacitor is derived, and the use of error mapping, to identify parameter boundaries and provide the designer with a qualitative feel for the accuracy of a proposed converter design, is explored

A generic database and spatial interface for the application of hydrological and water resource models

The paper discusses a software package that has been designed to enhance the efficiency of applying a range of hydrological and water resource simulation models. The SPATSIM (SPatial and Time Series Information Modeling) system has been developed in Delphi using MapObjects and incorporates a spatial data interface for access to the different types of information commonly associated with water resource analyses. All of the information is stored within database tables (Paradox by default) with generic structures. The structure and components of the system are briefly described and some example applications provided. The discussion identifies some of the criticisms that have been leveled at the software, the approach of the developers to user support and some possible future developments. The conclusions suggest that the development can be considered successful in that it has substantially improved the efficiency of the Institute for Water Research to undertake one of its core functions of hydrological model development and application