Plastic collapse of pipe bends under combined internal pressure and in-plane bending

Plastic collapse of pipe bends with attached straight pipes under combined internal pressure and in-plane closing moment is investigated by elastic–plastic finite element analysis. Three load histories are investigated, proportional loading, sequential pressure–moment loading and sequential moment–pressure loading. Three categories of ductile failure load are defined: limit load, plastic load (with associated criteria of collapse) and instability loads. The results show that theoretical limit analysis is not conservative for all the load combinations considered. The calculated plastic load is dependent on the plastic collapse criteria used. The plastic instability load gives an objective measure of failure and accounts for the effects of large deformations. The proportional and pressure–moment load cases exhibit significant geometric strengthening, whereas the moment–pressure load case exhibits significant geometric weakening

Entrepreneurs'' attitude towards the computer and its effect on e-business adoption

This paper presents research exploring further the concept that many SMEs do not adopt computer based technologies due to decision maker's negative attitudes towards computers generally. Importantly, by assessing the entrepreneur's belief structure, we provide quantitative evidence how SMEs, particularly micros, are affected. Earlier research that addresses technology acceptance model (TAM) suggests that TAM parameters are particularly influential factors of e-commerce adoption, as perceived by top managers of SMEs. The model we develop is tested using a sample of 655 enterprises. The information was gathered, via a telephone survey of UK SMEs, from decisions makers in the enterprise. Technically, the paper uses k-means cluster analysis to segment respondents using the TAM perceptions, ease of use, usefulness and enjoyment. Based on two determined segments we look at the differential rate of adoption of internet, and the potential adoption of new e-collaborative technologies like video conferencing and electronic whiteboards. The diffusion of internet for low IT utility (LIT) segments was considerably slower than in the high utility segment (HIT). Similarly, the anticipated adoption of e-collaboration technologies was much lower for LIT than HIT. Interestingly, we find that LIT is populated by more micro SMEs than HIT. The results we present are limited however as our sample is considerably underweight in micro SMEs, suggesting that the problem may be much larger in the economy than our model predicts. For policy makers, this research confirms the value of knowledge transfer programs to SMEs in the form of technology support. Our research shows that organisations which have dedicated IT support will tend to be more advanced technologically than those that do not. The implication for entrepreneurs is if they can be persuaded that a technological route is beneficial to them, and that suitable support can be provided via KT, then operational efficiency gains could be made. This paper contributes to knowle

The search for innovators and early adopters of e-collaborative technologies within small and medium sized enterprises in the UK

New product diffusion theory predicts that innovators and early adopters are critical to the success of new innovations. The rate at which enterprises adopt e-Science technologies must therefore rely upon reliable market intelligence so that the critical early stages of adoption are successfully navigated by developers and planners. Failure to understand attitudes towards new technologies can lead to even useful technologies being under-adopted. This paper applies a survey based methodology to develop estimates of demand for web based virtual Collaborative technologies. We show that approximately 76% of the 1029 firms that we interviewed are technologically ready to deploy these technologies. We also show that 10% of all firms are ready look at these technologies as solutions to collaborative problem solving

Energy Conversion Alternatives Study (ECAS), General Electric Phase 1. Volume 3: Energy Conversion subsystems and components. Part 2: Primary heat input systems and heat exchangers

Primary heat input systems and heat exchangers were evaluated for advanced energy conversion systems. Results are presented and discussed

Are there any good digraph width measures?

Several different measures for digraph width have appeared in the last few years. However, none of them shares all the "nice" properties of treewidth: First, being \emph{algorithmically useful} i.e. admitting polynomial-time algorithms for all \MS1-definable problems on digraphs of bounded width. And, second, having nice \emph{structural properties} i.e. being monotone under taking subdigraphs and some form of arc contractions. As for the former, (undirected) \MS1 seems to be the least common denominator of all reasonably expressive logical languages on digraphs that can speak about the edge/arc relation on the vertex set.The latter property is a necessary condition for a width measure to be characterizable by some version of the cops-and-robber game characterizing the ordinary treewidth. Our main result is that \emph{any reasonable} algorithmically useful and structurally nice digraph measure cannot be substantially different from the treewidth of the underlying undirected graph. Moreover, we introduce \emph{directed topological minors} and argue that they are the weakest useful notion of minors for digraphs

Search for the second forbidden beta decay of 8B to the ground state of 8Be

A significant decay branch of 8B to the ground state of 8Be would extend the solar neutrino spectrum to higher energies than anticipated in the standard solar models. These high-energy neutrinos would affect current neutrino oscillation results and also would be a background to measurements of the hep process. We have measured the delayed alpha particles from the decay of 8B, with the goal of observing the two 46-keV alpha particles arising from the ground-state decay. The 8B was produced using an in-flight radioactive beam technique. It was implanted in a silicon PIN-diode detector that was capable of identifying the alpha-particles from the 8Be ground state. From this measurement we find an upper limit (at 90% confidence level) of 7.3 x 10^{-5} for the branching ratio to the ground state. In addition to describing this measurement, we present a theoretical calculation for this branching ratio.Comment: One reference corrected. Minor edits in tex

Making Sense of the Legendre Transform

The Legendre transform is an important tool in theoretical physics, playing a critical role in classical mechanics, statistical mechanics, and thermodynamics. Yet, in typical undergraduate or graduate courses, the power of motivation and elegance of the method are often missing, unlike the treatments frequently enjoyed by Fourier transforms. We review and modify the presentation of Legendre transforms in a way that explicates the formal mathematics, resulting in manifestly symmetric equations, thereby clarifying the structure of the transform algebraically and geometrically. Then we bring in the physics to motivate the transform as a way of choosing independent variables that are more easily controlled. We demonstrate how the Legendre transform arises naturally from statistical mechanics and show how the use of dimensionless thermodynamic potentials leads to more natural and symmetric relations.Comment: 11 pages, 3 figure

Development of hot drawing process for nitinol tube

In recent years, Nitinol, near-equiatomic nickel-titanium alloys, have found growing applications in medical technology and joining technology, due to their special characteristics such as shape memory, superplasticity and biocompatibility. The production of Nitinol tube cost-effectively remains a technical challenge. In this paper, we describe a hot drawing process for Nitinol tube production. A Nitinol tube blank and a metal core are assembled together. The assembly is hot drawn for several passes to a final diameter. The metal core is then plastically stretched to reduce its diameter and removed from the tube. Hot drawing process has been applied to Ni50.7Ti and Ni47Ti44Nb9 alloys. Nitinol tubes of 13.6 mm outer diameter and 1 mm wall thickness have been successfully produced from a tube blank of 20 mm outer diameter and 3.5 mm thickness

Comment on "On the uncertainty relations and squeezed states for the quantum mechanics on a circle"

It is shown by examples that the position uncertainty on a circle, proposed recently by Kowalski and Rembieli\'nski [J. Phys. A 35 (2002) 1405] is not consistent with the state localization. We argue that the relevant uncertainties and uncertainty relations (UR's) on a circle are that based on the Gram-Robertson matrix. Several of these generalized UR's are displayed and related criterions for squeezed states are discussed.Comment: 5 pages, LaTex2e, 3 figures.ep