Previous heat treatment inducing different plasma nitriding behaviors in martensitic stainless steel

In this work we report a study of the induced changes in structure and corrosion behavior of martensitic stainless steels nitrided by plasma immersion ion implantation (PI3) at different previous heat treatments. The samples were characterized by x-ray diffraction and glancing angle x-ray diffraction, scanning electron microscopy, energy dispersive x-ray spectroscopy, and potentiodynamic measurements. Depending on the proportion of retained austenite in the unimplanted material, different phase transformations are obtained at lower and intermediate temperatures of nitrogen implantation. At higher temperatures, the great mobility of the chromium yields CrN segregations like spots in random distribution, and the alpha'-martensite is degraded to alpha-Fe (ferrite). The nitrided layer thickness follows a fairly linear relationship with the temperature and a parabolic law with the process time. The corrosion resistance depends strongly on chromium segregation from the martensitic matrix, as a result of the formation of CrN during the nitrogen implantation process and the formation of CrxC during the heat treatment process. Briefly speaking, the best results are obtained using low tempering temperature and low implantation temperature (below 375 degrees) due to the increment of the corrosion resistance and nitrogen dissolution in the structure with not too high diffusion depths (about 5-10 mu m). (c) 2006 American Vacuum Society

Attainment rate as a surrogate indicator of the intervertebral neutral zone length in lateral bending: An in vitro proof of concept study

Background Lumbar segmental instability is often considered to be a cause of chronic low back pain. However, defining its measurement has been largely limited to laboratory studies. These have characterised segmental stability as the intrinsic resistance of spine specimens to initial bending moments by quantifying the dynamic neutral zone. However these measurements have been impossible to obtain in vivo without invasive procedures, preventing the assessment of intervertebral stability in patients. Quantitative fluoroscopy (QF), measures the initial velocity of the attainment of intervertebral rotational motion in patients, which may to some extent be representative of the dynamic neutral zone. This study sought to explore the possible relationship between the dynamic neutral zone and intervertebral rotational attainment rate as measured with (QF) in an in vitro preparation. The purpose was to find out if further work into this concept is worth pursuing. Method This study used passive recumbent QF in a multi-segmental porcine model. This assessed the intrinsic intervertebral responses to a minimal coronal plane bending moment as measured with a digital force guage. Bending moments about each intervertebral joint were calculated and correlated with the rate at which global motion was attained at each intervertebral segment in the first 10° of global motion where the intervertebral joint was rotating. Results Unlike previous studies of single segment specimens, a neutral zone was found to exist during lateral bending. The initial attainment rates for left and right lateral flexion were comparable to previously published in vivo values for healthy controls. Substantial and highly significant levels of correlation between initial attainment rate and neutral zone were found for left (Rho = 0.75, P = 0.0002) and combined left-right bending (Rho = 0.72, P = 0.0001) and moderate ones for right alone (Rho = 0.55, P = 0.0012). Conclusions This study found good correlation between the initial intervertebral attainment rate and the dynamic neutral zone, thereby opening the possibility to detect segmental instability from clinical studies. However the results must be treated with caution. Further studies with multiple specimens and adding sagittal plane motion are warranted

Адаптация персонала организации на примере сети кафе «Пельмени Project»

Объектом исследования является–система адаптации персонала в кафе «Пельмени Project» и разработка путей ее совершенствования. Предметом исследования является – система адаптации персонала. Цель работы– оценка системы адаптации и разработка методов ее совершенствования в кафе «Пельмени Project». В процессе исследования проводился комплексный опрос. В результате исследования были разработаны рекомендации по улучшению системы адаптации персоналом в кафе «Пельмени Project». Степень внедрения:система адаптации молодых сотрудников в кафе «Пельмени Project» находится на хорошем уровне, проводятся различные мероприятия для благоприятной адаптации на работе, несмотря на это, все равно существует ряд недоработок в этой области, подтверждением тому является текучка кадров и неудовлетворенность новых сотрудников.The object of this study is to adapt the system-staff in the cafe "Dumplings Project» and to develop ways to improve it. The subject issledovaniyayavlyaetsya - personnel system adaptation. The purpose work- evaluation system to adapt and develop methods to improve it in the cafe "Dumplings Project». The study conducted a comprehensive survey. The study developed recommendations to improve the personnel system to adapt to the cafe "Dumplings Project». Degree of implementation: adapting the system of young staff in the cafe "Dumplings Project» is at a good level, hosts a variety of supportive measures for adaptation to work, in spite of this, all still there are some shortcomings in this area, confirming that is staff turnover and dissatisfaction with the new employees

3D printed flow plates for the electrolysis of water: an economic and adaptable approach to device manufacture

The electrolysis of water is considered a promising route to the production of hydrogen from renewable energy sources. Electrolysers based on proton exchange membranes (PEMs) have a number of advantages including high current density, high product gas purity and the ability to operate at high pressure. Despite these advantages the high cost of such devices is an impediment to their widespread deployment. A principal factor in this cost are the materials and machining of flow plates for distribution of the liquid reagents and gaseous products in the electrochemical cell. We demonstrate the production and operation of a PEM electrolyser constructed from silver coated 3D printed components fabricated from polypropylene. This approach allows construction of light weight, low cost electrolysers and the rapid prototyping of flow field design. Furthermore we provide data on the operation of this electrolyser wherein we show that performance is excellent for a first generation device in terms of overall efficiency, internal resistances and current–voltage response. This development opens the door to the fabrication of light weight and cheap electrolysers as well as related electrochemical devices such as flow batteries and fuel cells

Does lumbar spinal degeneration begin with the anterior structures? A study of the observed epidemiology in a community-based population

<p>Abstract</p> <p>Background-</p> <p>Prior studies that have concluded that disk degeneration uniformly precedes facet degeneration have been based on convenience samples of individuals with low back pain. We conducted a study to examine whether the view that spinal degeneration begins with the anterior spinal structures is supported by epidemiologic observations of degeneration in a community-based population.</p> <p>Methods-</p> <p>361 participants from the Framingham Heart Study were included in this study. The prevalences of anterior vertebral structure degeneration (disk height loss) and posterior vertebral structure degeneration (facet joint osteoarthritis) were characterized by CT imaging. The cohort was divided into the structural subgroups of participants with 1) no degeneration, 2) isolated anterior degeneration (without posterior degeneration), 3) combined anterior and posterior degeneration, and 4) isolated posterior degeneration (without anterior structure degeneration). We determined the prevalence of each degeneration pattern by age group < 45, 45-54, 55-64, ≥65. In multivariate analyses we examined the association between disk height loss and the response variable of facet joint osteoarthritis, while adjusting for age, sex, BMI, and smoking.</p> <p>Results-</p> <p>As the prevalence of the no degeneration and isolated anterior degeneration patterns decreased with increasing age group, the prevalence of the combined anterior/posterior degeneration pattern increased. 22% of individuals demonstrated isolated posterior degeneration, without an increase in prevalence by age group. Isolated posterior degeneration was most common at the L5-S1 and L4-L5 spinal levels. In multivariate analyses, disk height loss was independently associated with facet joint osteoarthritis, as were increased age (years), female sex, and increased BMI (kg/m²), but not smoking.</p> <p>Conclusions-</p> <p>The observed epidemiology of lumbar spinal degeneration in the community-based population is consistent with an ordered progression beginning in the anterior structures, for the majority of individuals. However, some individuals demonstrate atypical patterns of degeneration, beginning in the posterior joints. Increased age and BMI, and female sex may be related to the occurrence of isolated posterior degeneration in these individuals.</p

Direction of the formation of anterior lumbar vertebral osteophytes

<p>Abstract</p> <p>Background</p> <p>X-ray images of lumbar degenerative diseases often show not only claw osteophytes, but also pairs of osteophytes that form in a direction away from the adjacent disc. We have investigated the direction of the formation of anterior lumbar vertebral osteophytes across the lumbar vertebrae using a sufficient number of lumbar radiographs, because osteophytes images can provide essential information that will contribute to the understanding of the pathology and progress of lumbar spine degeneration.</p> <p>Methods</p> <p>The direction of the formation of 14,250 pairs of anterior lumbar vertebral osteophytes across the adjacent intervertebral discs in 2,850 patients who were all over 60 years old was investigated. Anterior lumbar vertebral osteophytes were distributed into six groups based on the direction of extension of each pair of osteophytes across the intervertebral disc space.</p> <p>Results</p> <p>In L1–L2 and L2–L3, the number of patients classified into groups B (the pair of osteophytes extended in the direction of the adjacent disc) and C (almost complete bone bridge formation by a pair of osteophytes across the intervertebral disc space) was larger than that classified into group D (the pair of osteophytes extended in a direction away from the adjacent disc). In L3–L4, L4–L5 and L5-S1, the number of patients in group D was greater than that of patients belonging to groups B and C.</p> <p>Conclusion</p> <p>Our study showed that pairs of osteophytes frequently formed in the direction of the adjacent disc in the upper lumbar vertebrae (L1–L2 and L2–L3) and in the direction away from the adjacent disc in middle or lower lumbar vertebrae (L3–L4, L4–L5, and L5-S1).</p

Time Dependence of Tip Morphology during Cellular/Dendritic Arrayed Growth

Succinonitrile-1.9 wt pct acetone has been directionally solidified in 0.7 X 0.7-cm-square cross section pyrex ampoules in order to observe the cell/dendrite tip morphologies, not influenced by the 'wall effects', which are present during growth in the generally used thin (about 200 gm) crucibles. The tips do not maintain a steady-state shape, as is generally assumed. Instead, they fluctuate within a shape envelope. The extent of fluctuation increases with decreasing growth speed, as the micro structure changes from the dendritic to cellular. The influence of natural convection has been examined by comparing these morphologies with those grown, without convection, in the thin ampoules

The correlation between exaggerated fluid in lumbar facet joints and degenerative spondylolisthesis: prospective study of 52 patients

Magnetic resonance imaging (MRI) is often used to evaluate low back pain; however, MRI in the supine position does not always reveal degenerative spondylolisthesis. The existence of a linear correlation between increased fluid in the facet joints seen on the supine axial T2 MRI of the lumbosacral spine and lumbar instability seen on standing lateral flexion-extension lumbosacral radiographs has recently been reported. The objective of this prospective study was to determine the incidence of increased fluid in the lumbar facet joints seen on the supine axial T2 MRI, and to evaluate the correlation of this finding with radiographic evidence of lumbar instability