Effect of Welding Speed on Mechanical Properties of Dissimilar Friction Stir Welded AA5083-H321 and AA6061-T6 Aluminum Alloys

Fusion welding of aluminum and its alloys tends to degrade the mechanical strength at the weld joint area due to high thermal diffusivity and high melting point. Friction Stir Welding (FSW) is the best alternative for joining of these materials against fusion joining. FSW is an emerging solid state joining process in which the material that is being welded does not melt and recast. The main objective of this research is to use FSW for joining of 5 mm thick AA5083-H321 and AA6061 T6 aluminum alloys using taper cylindrical threaded tool pin profile and scrolling on shoulder surface. The microstructure and mechanical characterization of dissimilar friction stir welded AA5083-H321 and AA6061-T6 aluminum alloys were studied. Four different welding speeds (40, 63, 80 and 100 mm/min) were used to weld the dissimilar alloys at constant tool rotational speed of 1120 rpm, tilt angle 2.50. The effect of welding speed on metallurgical and mechanical properties was analyzed. It is found that the welding speed of 80 mm/min produces good mechanical and metallurgical properties than other welding speeds. The observed results were correlated with the fracture features and microstructure. The fracture mode was observed to be a ductile fibrous fracture

Lymphoepithelial carcinoma in the maxillary sinus: a case report.

INTRODUCTION: Lymphoepithelial carcinoma of the maxillary sinus is a very rare malignancy and it can be difficult to make a pre-operative diagnosis. CASE PRESENTATION: A 72-year-old Caucasian woman presented to our facility with an isolated right-side epistaxis that had been present for three months, with the results of a computed tomography scan showing a soft tissue mass in the right maxillary sinus with an impacted tooth. The results of a transnasal endoscopic biopsy were compatible with a lymphoepithelial carcinoma, following which our patient underwent a radical excision of the mass. The final histology results revealed lymphoepithelial carcinoma of the maxillary sinus with negative assays for Epstein-Barr virus. Our patient was given post-operative external radiotherapy and has remained disease-free at three-year follow-up. CONCLUSIONS: This report details the diagnosis and management of a case of lymphoepithelial carcinoma of the maxillary sinus, which is a very rare malignant tumor with very little mention in the literature. Only a strong suspicion with systematic use of various patho-immunological tests helps to arrive at a definitive diagnosis by excluding other better-known tumors

Pre-treatment loss to follow-up among smear-positive pulmonary tuberculosis cases: a 10-year audit of national data from Fiji

SETTING: All tuberculosis (TB) diagnostic and treatment centres in Fiji. OBJECTIVES: To report on pre-treatment loss to follow-up rates over a 10-year period (2001–2010) and to examine if patients’ age, sex and geographic origin are associated with the observed shortcomings in the health services. METHODS: A retrospective review of routine programme data reconciling TB laboratory and treatment registers. RESULTS: A total of 690 sputum smear-positive TB patients were diagnosed in the laboratory, of whom 579 (84%) were started on anti-tuberculosis treatment—an overall pre-treatment loss to follow-up of 111 (16%). Peak loss to follow-up rates were seen in 2003, 2004 and 2010. Pre-treatment losses were all aged ≥15 years. In the Western Division of Fiji, 33% of sputum-positive patients were declared pre-treatment loss to follow-up; this division had over five times the risk of such an adverse outcome compared to the Central Division (OR 5.2, 95%CI 3.1–8.9, P < 0.0001). CONCLUSION: This study has identified an important shortcoming in programme linkage, communication and feedback between TB diagnostic and treatment services, leading to high pre-treatment loss to follow-up rates. This negatively influences TB services, and ways to rectify this situation are discussed

Effect of impurity substitution on band structure and mass renormalization of the correlated FeTe0.5_{0.5}Se0.5_{0.5} superconductor

Using angle-resolved photoemission spectroscopy (ARPES), we studied the effect of the impurity potential on the electronic structure of FeTe$_{0.5}$Se$_{0.5}$ superconductor by substituting 10\% of Ni for Fe which leads to an electron doping of the system. We could resolve three hole pockets near the zone center and an electron pocket near the zone corner in the case of FeTe$_{0.5}$Se$_{0.5}$, whereas only two hole pockets near the zone center and an electron pocket near the zone corner are resolved in the case of Fe$_{0.9}$Ni$_{0.1}$Te$_{0.5}$Se$_{0.5}$, suggesting that the hole pocket having predominantly the $xy$ orbital character is very sensitive to the impurity scattering. Upon electron doping, the size of the hole pockets decrease and the size of the electron pockets increase as compared to the host compound. However, the observed changes in the size of the electron and hole pockets are not consistent with the rigid-band model. Moreover, the effective mass of the hole pockets is reduced near the zone center and of the electron pockets is increased near the zone corner in the doped Fe$_{0.9}$Ni$_{0.1}$Te$_{0.5}$Se$_{0.5}$ as compared to FeTe$_{0.5}$Se$_{0.5}$. We refer these observations to the changes of the spectral function due to the effect of the impurity potential of the dopants.Comment: 8 pages, 3 figure

Cosmo-dynamics and dark energy with a quadratic EoS: anisotropic models, large-scale perturbations and cosmological singularities

In general relativity, for fluids with a linear equation of state (EoS) or scalar fields, the high isotropy of the universe requires special initial conditions, and singularities are anisotropic in general. In the brane world scenario anisotropy at the singularity is suppressed by an effective quadratic equation of state. There is no reason why the effective EoS of matter should be linear at the highest energies, and a non-linear EoS may describe dark energy or unified dark matter (Paper I, astro-ph/0512224). In view of this, here we study the effects of a quadratic EoS in homogenous and inhomogeneous cosmological models in general relativity, in order to understand if in this context the quadratic EoS can isotropize the universe at early times. With respect to Paper I, here we use the simplified EoS P=alpha rho + rho^2/rho_c, which still allows for an effective cosmological constant and phantom behavior, and is general enough to analyze the dynamics at high energies. We first study anisotropic Bianchi I and V models, focusing on singularities. Using dynamical systems methods, we find the fixed points of the system and study their stability. We find that models with standard non-phantom behavior are in general asymptotic in the past to an isotropic fixed point IS, i.e. in these models even an arbitrarily large anisotropy is suppressed in the past: the singularity is matter dominated. Using covariant and gauge invariant variables, we then study linear perturbations about the homogenous and isotropic spatially flat models with a quadratic EoS. We find that, in the large scale limit, all perturbations decay asymptotically in the past, indicating that the isotropic fixed point IS is the general asymptotic past attractor for non phantom inhomogeneous models with a quadratic EoS. (Abridged)Comment: 16 pages, 6 figure

Boron Isotope Effect in Superconducting MgB2_2

We report the preparation method of, and boron isotope effect for MgB$_2$, a new binary intermetallic superconductor with a remarkably high superconducting transition temperature $T_c$($^{10}$B) = 40.2 K. Measurements of both temperature dependent magnetization and specific heat reveal a 1.0 K shift in $T_c$ between Mg$^{11}$B$_2$ and Mg$^{10}$B$_2$. Whereas such a high transition temperature might imply exotic coupling mechanisms, the boron isotope effect in MgB$_2$ is consistent with the material being a phonon-mediated BCS superconductor.Comment: One figure and related discussion adde

Review paper: Application of the Pulsed Eddy Current Technique to Inspect Pipelines of Nuclear Plants

Local wall thinning in pipelines affects the structural integrity of industries, such as nuclear power plants (NPPs). In the present study, a development of pulsed eddy current (PEC) technology that detects the wall thinning of pipelines covered with insulation is reviewed. The methods and experimental results, which have two kinds of probe with a single and double core, were compared. For this purpose, the single and double core probes having one and two excitation coils have been devised, and the differential probe with two Hall sensors has been fabricated to measure the wall thinning in insulated pipelines. The test sample is a stainless steel having different thickness, laminated by plastic insulation to simulate the pipelines in NPPs. The excitation coils in the probe is driven by a rectangular current pulse, the difference of two Hall sensors has been measured as a resultant PEC signal. The peak value of the detected signal is used to describe the wall thinning. The double core probe has better performance to detect the wall thinning covered with insulation; the single core probe can detect the wall thinning up to an insulation thickness of 18 mm, whereas the double probe can detect up to 25 mm. The results show that the double core PEC probe has the potential to detect the wall thinning in an insulated pipeline of the NPPs

Prediction of the Atomization Energy of Molecules Using Coulomb Matrix and Atomic Composition in a Bayesian Regularized Neural Networks

Exact calculation of electronic properties of molecules is a fundamental step for intelligent and rational compounds and materials design. The intrinsically graph-like and non-vectorial nature of molecular data generates a unique and challenging machine learning problem. In this paper we embrace a learning from scratch approach where the quantum mechanical electronic properties of molecules are predicted directly from the raw molecular geometry, similar to some recent works. But, unlike these previous endeavors, our study suggests a benefit from combining molecular geometry embedded in the Coulomb matrix with the atomic composition of molecules. Using the new combined features in a Bayesian regularized neural networks, our results improve well-known results from the literature on the QM7 dataset from a mean absolute error of 3.51 kcal/mol down to 3.0 kcal/mol.Comment: Under review ICANN 201

Electronic structures of free-standing nanowires made from indirect bandgap semiconductor gallium phosphide

We present a theoretical study of the electronic structures of freestanding nanowires made from gallium phosphide (GaP)--a III-V semiconductor with an indirect bulk bandgap. We consider [001]-oriented GaP nanowires with square and rectangular cross sections, and [111]-oriented GaP nanowires with hexagonal cross sections. Based on tight binding models, both the band structures and wave functions of the nanowires are calculated. For the [001]-oriented GaP nanowires, the bands show anti-crossing structures, while the bands of the [111]-oriented nanowires display crossing structures. Two minima are observed in the conduction bands, while the maximum of the valence bands is always at the $\Gamma$-point. Using double group theory, we analyze the symmetry properties of the lowest conduction band states and highest valence band states of GaP nanowires with different sizes and directions. The band state wave functions of the lowest conduction bands and the highest valence bands of the nanowires are evaluated by spatial probability distributions. For practical use, we fit the confinement energies of the electrons and holes in the nanowires to obtain an empirical formula.Comment: 19 pages, 10 figure