Rubberised bitumen manufacturing assisted by rheological measurements

This paper investigates the effect of processing temperature and time on the rheological properties of recycled tyre rubber-modified bitumens (RTR-MBs) produced using two different base binders and an ambient ground crumb rubber modifier (CRM). The production of the RTR-MBs was accomplished by means of a standard Brookfield rotational viscometer together with a modified impeller, dual helical impeller, to allow mixing as well as real-time viscosity measurements of the produced RTR-MBs. The rheological properties of the final RTR-MBs were determined by means of standard dynamic mechanical analysis oscillatory and multiple stress creep recovery testing using a dynamic shear rheometer. The results indicate that the low processing conditions (160°C and 60 min) are not appropriate for developing RTR-MBs with enhanced physical and rheological properties. However, allowing the crumb rubber to interact with the base binder for longer mixing times (140 min) led to the development of an enhanced rubber (polymer) network structure within the blend (i.e. swelling of the CRM particles) and superior rheological properties. At the other extreme, using high-processing conditions (200°C and 140 min) led to RTR-MBs in which the rubber network had been subjected to devulcanisation and depolymerisation with a subsequent reduction in modification

Optical Module Front-End for a Neutrino Underwater Telescope: PMT interface

A proposal for a new system to capture signals in the Optical Module (OM) of an Underwater Neutrino Telescope is described. It concentrates on the problem of power consumption in relation to precision. In particular, a solution for the interface between the photomultiplier (PMT) and the front-end electronics is presented

Smart Analogue Sampler for the Optical Module of a Cherenkov Neutrino Detector

A transient waveform sampler/recorder IC has been developed and realized in AMS C35B4 technology. This chip has been designed to fit the needs of a proposal for a front-end architecture for the readout of the anode signal of the photomultipliers in an underwater neutrino telescope. The design is based around a 3 channels x 32 cells switched capacitor array unit sampling its voltage inputs at 200MHz external clock rate and transferring the stored analogue voltage samples to its single analogue output at 1/10th of the sampling rate. This unit is replicated inside the ASIC providing 4 independent analogue sampling queues for signal transients up to 32 x 5 ns and a fifth unit storing transients up to 128 x 5 ns. A micro-pipelined unit, based on Muller C-gates, controls the 5 independent samplers. This paper briefly summarizes the complete front-end architecture and discusses in more detail the internal structure of the ASIC and its first functional tests

The MEV project: design and testing of a new high-resolution telescope for Muography of Etna Volcano

The MEV project aims at developing a muon telescope expressly designed for the muography of Etna Volcano. In particular, one of the active craters in the summit area of the volcano would be a suitable target for this experiment. A muon tracking telescope with high imaging resolution was built and tested during 2017. The telescope is a tracker based on extruded scintillating bars with WLS fibres and featuring an innovative read-out architecture. It is composed of three XY planes with a sensitive area of \SI{1}{m^2}; the angular resolution does not exceeds \SI{0.4}{\milli\steradian} and the total angular aperture is about $\pm$\SI{45}{\degree}. A special effort concerned the design of mechanics and electronics in order to meet the requirements of a detector capable to work in a hostile environment such as the top of a tall volcano, at a far distance from any facility. The test phase started in January 2017 and ended successfully at the end of July 2017. An extinct volcanic crater (the Monti Rossi, in the village of Nicolosi, about 15km from Catania) is the target of the measurement. The detector acquired data for about 120 days and the preliminary results are reported in this work

Low Power Front End for the Optical Module of a Neutrino Underwater Telescope

A proposal for a new system to capture signals in the Optical Module (OM) of an underwater neutrino telescope is described. It concentrates on the problem of power consumption and time precision. In particular, a solution for the interface between the photomultiplier (PMT) and the front-end electronics is presented

Relationship between heart rate variability and repeated sprint exercise in young soccer players

Aim: The sport of soccer is characterized by neuromuscular performance resulting in short bursts interspersed by brief recovery periods over an extended period of time. Several studies suggest that the cardiac autonomic nervous system (ANS) assessed by heart rate variability (HRV) may provide useful information regarding the functional adaptations to training stimulus. Although HRV has often been associated with aerobic power and cardiovascular fitness, the influence of sympathovagal balance on neuromuscular performance in young athletes is not well assessed. The aim of this study was to assess the influence of the autonomic system on the performance of repeated sprints, involving predominantly muscular power and anaerobic metabolism, in young soccer players. Method: Twelve young soccer players, selected for the Sicilian Regional Representative of the Italian Football Federation, mean age 15 years, were recruited. Resting HRV was measured and indices of power spectral analysis (ratio LF/HF) were calculated to evaluate the sympathovagal balance. To assess the state of physical fitness of subjects, VO2max was determined by maximal graded treadmill test. Finally, the athletes performed 10 maximal all-out 6-sec cycling sprints (RS), interspersed with 30-sec of passive recovery, to measure the peak power (PP) represented by the highest value recorded during a single sprint, and the average of the values of maximum power (AP) recorded during all sprints. Results: On the basis of their VO2max (56.22 ± 3.93 ml/Kg/min), all subjects showed good levels of physical fitness. HRV index (LF/HF = 1.31 ± 0.74) showed an inverse correlation with PP (14.05 ± 0.89 W/Kg; r = -0.709, P = 0.01), and with AP (12.82 ± 0.88 W/Kg; r = -0.606, P = 0.04). Conclusion: Our study shows that a low ratio LF/HF, which reflects a parasympathetic predominance in the ANS balance, is associated with a better anaerobic contribution to performance resulting in higher values of PP and AP during brief repeated maximal cycling sprints. The assessment of resting HRV before exercise may be useful for performance monitoring of young soccer players