Cavity Optomechanical Magnetometer

A cavity optomechanical magnetometer is demonstrated where the magnetic field induced expansion of a magnetostrictive material is transduced onto the physical structure of a highly compliant optical microresonator. The resulting motion is read out optically with ultra-high sensitivity. Detecting the magnetostrictive deformation of Terfenol-D with a toroidal whispering gallery mode (TWGM) resonator a peak sensitivity of 400 nT/Hz^.5 was achieved with theoretical modelling predicting that sensitivities of up to 500 fT/Hz^.5 may be possible. This chip-based magnetometer combines high-sensitivity and large dynamic range with small size and room temperature operation

Fabrication of micro-structures for optically driven micromachines using two-photon photopolymerization of UV curing resins

Two-photon photopolymerization of UV curing resins is an attractive method for the fabrication of microscopic transparent objects with size in the tens of micrometers range. We have been using this method to produce three-dimensional structures for optical micromanipulation, in an optical system based on a femtosecond laser. By carefully adjusting the laser power and the exposure time we were able to create micro-objects with well-defined 3D features and with resolution below the diffraction limit of light. We discuss the performance and capabilities of a microfabrication system, with some examples of its products.Comment: 12 pages, 10 figure

Calibration of a single atom detector for atomic micro chips

We experimentally investigate a scheme for detecting single atoms magnetically trapped on an atom chip. The detector is based on the photoionization of atoms and the subsequent detection of the generated ions. We describe the characterization of the ion detector with emphasis on its calibration via the correlation of ions with simultaneously generated electrons. A detection efficiency of 47.8% (+-2.6%) is measured, which is useful for single atom detection, and close to the limit allowing atom counting with sub-Poissonian uncertainty

Growth dynamics of a Bose-Einstein condensate in a dimple trap without cooling

We study the formation of a Bose-Einstein condensate in a cigar-shaped three-dimensional harmonic trap, induced by the controlled addition of an attractive "dimple" potential along the weak axis. In this manner we are able to induce condensation without cooling due to a localized increase in the phase space density. We perform a quantitative analysis of the thermodynamic transformation in both the sudden and adiabatic regimes for a range of dimple widths and depths. We find good agreement with equilibrium calculations based on self-consistent semiclassical Hartree-Fock theory describing the condensate and thermal cloud. We observe there is an optimal dimple depth that results in a maximum in the condensate fraction. We also study the non-equilibrium dynamics of condensate formation in the sudden turn-on regime, finding good agreement for the observed time dependence of the condensate fraction with calculations based on quantum kinetic theory.Comment: v1: 9 pages, 7 figures, submitted to Phys. Rev. A; v2: 10 pages, 8 figures, fixed typos, added references, additional details on experimental procedure, values of phase-space density, new figure and discussion on effects of three-body loss in Appendix B (replaced with published version

Observation of shock waves in a large Bose-Einstein condensate

We observe the formation of shock waves in a Bose-Einstein condensate containing a large number of sodium atoms. The shock wave is initiated with a repulsive, blue-detuned light barrier, intersecting the BEC, after which two shock fronts appear. We observe breaking of these waves when the size of these waves approaches the healing length of the condensate. At this time, the wave front splits into two parts and clear fringes appear. The experiment is modeled using an effective 1D Gross-Pitaevskii-like equation and gives excellent quantitative agreement with the experiment, even though matter waves with wavelengths two orders of magnitude smaller than the healing length are present. In these experiments, no significant heating or particle loss is observed.Comment: 7 pages, 7 figure

Laser frequency locking by direct measurement of detuning

We present a new method of laser frequency locking in which the feedback signal is directly proportional to the detuning from an atomic transition, even at detunings many times the natural linewidth of the transition. Our method is a form of sub-Doppler polarization spectroscopy, based on measuring two Stokes parameters ($I_2$ and $I_3$) of light transmitted through a vapor cell. This extends the linear capture range of the lock loop by up to an order of magnitude and provides equivalent or improved frequency discrimination as other commonly used locking techniques.Comment: 4 pages, 4 figures Revte

Multiple-scattering Modelling of Scattering by Biological Cells

Past work on scattering by biological cells has been restricted to unrealistic oversimplified models of cells, or uses slow methods unsuited for calculations involving large numbers of cells or varying illumination. We consider the systematic use of fast, accurate methods for modelling light scattering in realistic complex biological cells. This will allow, for example, the study of light scattering by realistic ensembles of cells, which is immediately applicable to optical cancer detection, and remote sensing of microorganisms. It will also be possible to study light scattering by cells under constantly varying illumination, such as encountered in applications like flow cytometry

Radiation measurements in a simulated non-terrestrial atmosphere

A high-speed wind tunnel has been used to experimentally simulate the flow experienced by a capsule entering a planetary atmosphere. High speed photography showed that a steady test time of approximately 50 μs existed in the facility. Holographic interferometry has been performed to measure the twodimensional density distribution around a cylinder in the flow. A peak density ratio (density normalised by the free-stream density) of about 14 was observed. Emission spectroscopy allowed the characterisation of the conditions along the stagnation streamline in front of the capsule model. The results showed a temperature that varied between 8,500 K and 11,000 K in this region

Sensitivity of cavity optomechanical field sensors

This article presents a technique for modeling cavity optomechanical field sensors. A magnetic or electric field induces a spatially varying strain across the sensor. The effect of this strain is accounted for by separating the mechanical motion of the sensor into eigenmodes, each modeled by a simple harmonic oscillator. The force induced on each oscillator can then be determined from an overlap integral between strain and the corresponding eigenmode, with the optomechanical coupling strength determining the ultimate resolution with which this force can be detected

Optical microrheology using rotating laser-trapped particles

We demonstrate an optical system that can apply and accurately measure the torque exerted by the trapping beam on a rotating birefringent probe particle. This allows the viscosity and surface effects within liquid media to be measured quantitatively on a micron-size scale using a trapped rotating spherical probe particle. We use the system to measure the viscosity inside a prototype cellular structure.Comment: 5 pages, 4 figures. v2: bibliographic details, minor text correction