TTCPR: a PMC receiver for TTC

Abstract The TTCPR receiver is a mezzanine card intended for use in distributing TTC information to Data Acquisition and Trigger Crates in the ATLAS Prototype Integration activities. An original prototype run of these ~cards was built for testbeam and integration studies, implemented in both the PMC and PCI form factors, using the TTCrx chips from the previous manufacture. When the new TTCrx chips became available, the TTCPR was redesigned to take advantage of the availability and enhanced features of the new TTCRX(1), and a run of 20 PMC cards was manufactured, and has since been used in integration studies and the testbeam. The TTCPR uses the AMCC 5933(2) to manage the PCI port, an Altera 10K30A(3) to provide all the logic so that the functionality may be easily altered, and provides a 4K deep FIFO to retain TTC data for subsequent DMA through the PCI port. In addition to DMA's which are mastered by the Add On logic, communication through PCI is accomplished via mailboxes, interrupts, and the pass-through feature of the 5933. An interface to the I2C bus of the TTCRX is provided so that internal registers may be accessed, and the card supports reinitialization of the TTCRX from PCI. Software has been developed to support operation of the TTCPR under both LynxOS and Linux. I. History of the TTCPR The TTCPR was developed in response to a need for TTC(4) information in the Data Acquisition from TileCal Modules in the ATLAS Test Beam. Specifically, it was desired to have EventID, Bunch Counter, and Trigger Type available from TTC in the data records. It was useful to have the TTC information available to processors in the Data Acquisition crates through PCI ports, and to have the data transferred to the processor's address space via an externally mastered DMA. Accordingly, the TTCPR was designed as a mezzanine card in the PMC form factor. The original cards utilized the older nonradhard version of the TTCRX, because the new radhard version was not available at that time. When it became clear that the new TTCRX would be available soon and also that it would not be possible to obtain any more of the older TTCRX chips, the TTCPR was redesigned, and enhancements were added to take advantage of the features of the new TTCRX. This new TTCPR was produced and has been used successfully in data acquisition at the ATLAS Test Beam. The card has also been implemented in the PCI form factor. The TTCPR in the PMC version is shown in II. Architecture of the TTCPR A block diagram of the TTCPR is shown i

Construction of the Soudan 2 detector

Progress in the construction of the Soudan 2 nucleon decay detector which is being built at the Soudan iron mine in Minnesota is discussed. The expected event rate and characteristics of low energy neutrino events, muon events, multiple muon events, and other cosmic ray phenomena are discussed

Uses and Abuses of Effective Lagrangians

Motivated by past and recent analyses we critically re-examine the use of effective lagrangians in the literature to constrain new physics and to determine the `physics reach' of future experiments. We demonstrate that many calculations, such as those involving anomalous trilinear gauge-boson couplings, either considerably overestimate loop-induced effects, or give ambiguous answers. The source of these problems is the use of cutoffs to evaluate the size of such operators in loop diagrams. In contrast to other critics of these loop estimates, we prove that the inclusion of nonlinearly-realized gauge invariance into the low-energy lagrangian is irrelevant to this conclusion. We use an explicit example using known multi-Higgs physics above the weak scale to underline these points. We show how to draw conclusions regarding the nature of the unknown high-energy physics without making reference to low-energy cutoffs.Comment: 36 page

Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter

We present a study of showers initiated by electrons, pions, kaons, and protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE scintillator-tungsten analogue hadronic calorimeter. The data were recorded at the CERN Super Proton Synchrotron in 2011. The analysis includes measurements of the calorimeter response to each particle type as well as measurements of the energy resolution and studies of the longitudinal and radial shower development for selected particles. The results are compared to Geant4 simulations (version 9.6.p02). In the study of the energy resolution we include previously published data with beam momenta from 1 GeV to 10 GeV recorded at the CERN Proton Synchrotron in 2010.Comment: 35 pages, 21 figures, 8 table

The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers

The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and depends on the active medium and on the absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15 small plastic scintillator tiles read out with Silicon Photomultipliers, the time structure of showers is measured on a statistical basis with high spatial and temporal resolution in sampling calorimeters with tungsten and steel absorbers. The results are compared to GEANT4 (version 9.4 patch 03) simulations with different hadronic physics models. These comparisons demonstrate the importance of using high precision treatment of low-energy neutrons for tungsten absorbers, while an overall good agreement between data and simulations for all considered models is observed for steel.Comment: 24 pages including author list, 9 figures, published in JINS

Inclusive search for same-sign dilepton signatures in pp collisions at root s=7 TeV with the ATLAS detector

An inclusive search is presented for new physics in events with two isolated leptons (e or mu) having the same electric charge. The data are selected from events collected from p p collisions at root s = 7 TeV by the ATLAS detector and correspond to an integrated luminosity of 34 pb(-1). The spectra in dilepton invariant mass, missing transverse momentum and jet multiplicity are presented and compared to Standard Model predictions. In this event sample, no evidence is found for contributions beyond those of the Standard Model. Limits are set on the cross-section in a fiducial region for new sources of same-sign high-mass dilepton events in the ee, e mu and mu mu channels. Four models predicting same-sign dilepton signals are constrained: two descriptions of Majorana neutrinos, a cascade topology similar to supersymmetry or universal extra dimensions, and fourth generation d-type quarks. Assuming a new physics scale of 1 TeV, Majorana neutrinos produced by an effective operator V with masses below 460 GeV are excluded at 95% confidence level. A lower limit of 290 GeV is set at 95% confidence level on the mass of fourth generation d-type quarks

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal