Nonmonotonic Evolution of the Blocking Temperature in Dispersions of Superparamagnetic Nanoparticles

We use a Monte Carlo approach to simulate the influence of the dipolar interaction on assemblies of monodisperse superparamagnetic ${\gamma}-Fe_{2}O_{3}$ nanoparticles. We have identified a critical concentration c*, that marks the transition between two different regimes in the evolution of the blocking temperature ($T_{B}$) with interparticle interactions. At low concentrations (c < c*) magnetic particles behave as an ideal non-interacting system with a constant $T_{B}$. At concentrations c > c* the dipolar energy enhances the anisotropic energy barrier and $T_{B}$ increases with increasing c, so that a larger temperature is required to reach the superparamagnetic state. The fitting of our results with classical particle models and experiments supports the existence of two differentiated regimes. Our data could help to understand apparently contradictory results from the literature.Comment: 13 pages, 7 figure

Micromagnetic evaluation of the dissipated heat in cylindrical magnetic nanowires

Magnetic nanowires (NW) are promising candidates for heat generation under AC-field application due to their large shape anisotropy. They may be used for catalysis, hyperthermia or water purification treatments. In the present work we theoretically evaluate the heat dissipated by a single magnetic nanowire, originated from the domain wall dynamics under the action of an AC-field. We compare the Permalloy NWs (which demagnetize via the transverse wall propagation) with the Co fcc NWs whose reversal mode is via a vortex domain wall. The average hysteresis loop areas -which are proportional to the Specific Absorption Rate (SAR)- as a function of the field frequency have a pronounced maximum in the range 200MHz-1GHz. This maximum frequency is smaller in Permalloy than in Co and depends on the nanowire length. A simple model related to the nucleation and propagation time and domain wall velocity (higher for the vortex than for the transverse domain wall) is proposed to explain the non-monotonic SAR dependence on the frequency.Comment: 12 pages, 5 figure

Self-consistent description of spin-phonon dynamics in ferromagnets

Several recently reported exciting phenomena such as spin caloritronics or ultrafast laser-induced spin dynamics involve the action of temperature on spin dynamics. However, the inverse effect of magnetization dynamics on temperature change is very frequently ignored. Based on the density matrix approach, in this work we derive a self-consistent model for describing the magnetization and phonon temperature dynamics in ferromagnets in the framework of the quantum Landau-Lifshitz-Bloch equation. We explore potential applicability of our approach for two cases, inspired by magnetocaloric effect and magnetic fluid hyperthermia. In the first case, the spin-phonon dynamics is governed by the longitudinal relaxation in bulk systems close to the Curie temperature; while in the second case it is described by the transverse relaxation during the hysteresis cycle of individual nanoparticles well below the Curie temperature

Particle interactions in liquid magnetic colloids by zero field cooled measurements: effects on heating efficiency

The influence of magnetic interactions in assemblies formed by either aggregated or disaggregated uniform gamma-Fe_2O_3 particles are investigated as a function of particle size, concentration, and applied field. Hyperthermia and magnetization measurements are performed in the liquid phase of colloids consisting of 8 and 13 nm uniform gamma-Fe_2O_3 particles dispersed in water and hexane. Although hexane allows the disagglomerated obtaining particle system; aggregation is observed in the case of water colloids. The zero field cooled (ZFC) curves show a discontinuity in the magnetization values associated with the melting points of water and hexane. Additionally, for 13 nm gamma-Fe_2O_3 dispersed in hexane, a second magnetization jump is observed that depends on particle concentration and shifts toward lower temperature by increasing applied field. This second jump is related to the strength of the magnetic interactions as it is only present in disagglomerated particle systems with the largest size, i.e., is not observed for 8 nm superparamagnetic particles, and surface effects can be discarded. The specific absorption rate (SAR) decreases with increasing concentration only for the hexane colloid, whereas for aqueous colloids, the SAR is almost independent of particle concentration. Our results suggest that, as a consequence of the magnetic interactions, the dipolar field acting on large particles increases with concentration, leading to a decrease of the SAR

The role of dipole interactions in hyperthermia heating colloidal clusters of densely-packed superparamagnetic nanoparticles

This work aims to investigate the influence of inter-particle dipole interactions on hyperthermia heating colloidal clusters of densely-packed Fe3O4 nanoparticles at low field intensity. Emulsion droplet solvent evaporation method was used to assemble oleic acid modified Fe3O4 particles into compact clusters which were stabilized by surfactant in water. Both experimental and simulation works were conducted to study their heating performance at different cluster’s sizes. The dipole interactions improve the heating only when the clusters are small enough to bring an enhancement in clusters’ shape anisotropy. The shape anisotropy is reduced at greater clusters’ sizes, since the shapes of the clusters become more and more spherical. Consequently, the dipole interactions change to impair the heating efficiency at larger sizes. When the clusters are totally isotropic in shape, the heating efficiency is lower than that of non-interacting particles despite the cluster’s size, although the efficiency increases by a little bit at a particular size most likely due to the dipole couplings. In these situations, one has to use particles with higher magnetic anisotropy and/or saturation magnetization to improve the heating

Learning form Nature to improve the heat generation of iron-oxide nanoparticles for magnetic hyperthermia applications.

The performance of magnetic nanoparticles is intimately entwined with their structure, mean size and magnetic anisotropy. Besides, ensembles offer a unique way of engineering the magnetic response by modifying the strength of the dipolar interactions between particles. Here we report on an experimental and theoretical analysis of magnetic hyperthermia, a rapidly developing technique in medical research and oncology. Experimentally, we demonstrate that single-domain cubic iron oxide particles resembling bacterial magnetosomes have superior magnetic heating efficiency compared to spherical particles of similar sizes. Monte Carlo simulations at the atomic level corroborate the larger anisotropy of the cubic particles in comparison with the spherical ones, thus evidencing the beneficial role of surface anisotropy in the improved heating power. Moreover we establish a quantitative link between the particle assembling, the interactions and the heating properties. This knowledge opens new perspectives for improved hyperthermia, an alternative to conventional cancer therapies

Selective Magnetic Nanoheating: Combining Iron Oxide Nanoparticles for Multi-Hot-Spot Induction and Sequential Regulation

The contactless heating capacity of magnetic nanoparticles (MNPs) has been exploited in fields such as hyperthermia cancer therapy, catalysis, and enzymatic thermal regulation. Herein, we propose an advanced technology to generate multiple local temperatures in a single-pot reactor by exploiting the unique nanoheating features of iron oxide MNPs exposed to alternating magnetic fields (AMFs). The heating power of the MNPs depends on their magnetic features but also on the intensity and frequency conditions of the AMF. Using a mixture of diluted colloids of MNPs we were able to generate a multi-hot-spot reactor in which each population of MNPs can be selectively activated by adjusting the AMF conditions. The maximum temperature reached at the surface of each MNP was registered using independent fluorescent thermometers that mimic the molecular link between enzymes and MNPs. This technology paves the path for the implementation of a selective regulation of multienzymatic reactions

Chemical abundances and ionizing mechanisms in the star-forming double-ring of AM 0644-741 using MUSE data

We present the analysis of archival Very Large Telescope (VLT) Multi-Unit Spectroscopic Explorer (MUSE) observations of 179 HII regions in the star-forming double-ring collisional galaxy AM 0644-741 at 98.6 Mpc. We determined ionic abundances of He, N, O and Fe using the direct method for the brightest H II region (ID 39); we report $\log\rm{(\frac{N}{O})}=-1.3\pm0.2$ and $12+\log\rm{(\frac{O}{H})}=8.9\pm0.2$. We also find the so-called `blue-bump', broad He II $\lambda4686$, in the spectrum of this knot of massive star-formation; its luminosity being consistent with the presence of $\sim430$ Wolf-Rayet (WR) stars of the Nitrogen late-type. We determined the O abundances for 137 HII regions using the strong-line method; we report a median value of $12+\log\rm{(\frac{O}{H})}=8.5\pm0.8$. The location of three objects, including the WR complex, coincide with that of an Ultra Luminous X-ray source. Nebular He II is not detected in any H II region. We investigate the physical mechanisms responsible for the observed spectral lines using appropriate diagnostic diagrams and ionization models. We find that the H II regions are being photoionized by star clusters with ages $\sim2.5-20$ Myr and ionization potential $-3.5<$$\log\langle U\rangle$$<-3.0$. In these diagrams, a binary population is needed to reproduce the observables considered in this work.Comment: 20 pages. Accepted in MNRA

Controlling Magnetization Reversal and Hyperthermia Efficiency in Core-Shell Iron-Iron Oxide Magnetic Nanoparticles by Tuning the Interphase Coupling

Magnetic particle hyperthermia, in which colloidal nanostructures are exposed to an alternating magnetic field, is a promising approach to cancer therapy. Unfortunately, the clinical efficacy of hyperthermia has not yet been optimized. Consequently, routes to improve magnetic particle hyperthermia, such as designing hybrid structures comprised of different phase materials, are actively pursued. Here, we demonstrate enhanced hyperthermia efficiency in relatively large spherical Fe/Fe-oxide core-shell nanoparticles through the manipulation of interactions between the core and shell phases. Experimental results on representative samples with diameters in the range 30-80 nm indicate a direct correlation of hysteresis losses to the observed heating with a maximum efficiency of around 0.9 kW/g. The absolute particle size, the core-shell ratio, and the interposition of a thin wüstite interlayer are shown to have powerful effects on the specific absorption rate. By comparing our measurements to micromagnetic calculations, we have unveiled the occurrence of topologically nontrivial magnetization reversal modes under which interparticle interactions become negligible, aggregates formation is minimized and the energy that is converted into heat is increased. This information has been overlooked until date and is in stark contrast to the existing knowledge on homogeneous particles