Extruded and injection moulded virgin PA 6/6 as abrasion resistant material

Polyamide (PA6/6) is often used as a tribological pair in abrasion prevalent applications such as hinges and sliders. PA6/6 is frequently processed by injection moulding and extrusion process. It is known that these processes influence the polymers mechanical behaviour, but their influence on the polymers wear response has not been studied. Hence the present research attempts to study the influence of different manufacturing processes on tribological behaviour for PA6/6. Wear tests were performed on a pin abrading tester (DIN 50322). Abrasion resistance of both extruded and injection moulded PA6/6 were tested at different loads (20 and 35 N). Single-pass (nonoverlapping mode) and multipass testing (overlapping mode) were used to understand the influence of clogging of wear debris. It is evidenced that with increasing load the specific wear rate decreases; moreover, fine abrasives tend to reduce the wear rate. In multipass testing a transfer layer clogged on the counterface that acted as a protective agent and lowers wear rate. Poor mechanical strength of injection moulded polymers is apparently compensated by microstructural response for having a similar wear behaviour between extruded and injection moulded PA 6/6. Hence a proper balance between microstructural and mechanical characteristics is an absolute must in PA 6/6 for better wear performance

Monsoon prawn fishery by 'Matabala' along the Mangalore coast—a critical study

The article presents a report on a critical study about 'Matabala' also known as 'Disco net' (small version of purse seine net made of nylon), a gear used along the Mangalore coast during monsoon period. It was considered that the net was much more size specific to catch large sized prawns

A phase 1b study of Selumetinib in combination with Cisplatin and Gemcitabine in advanced or metastatic biliary tract cancer: the ABC-04 study

BACKGROUND: Combined treatment with cisplatin and gemcitabine (CisGem) is the standard of care for patients with advanced biliary tract cancer (ABC). Selumetinib (AZD6244, ARRY-142886) potently and selectively inhibits MEK1/2, an intracellular kinase and has shown activity in ABC. The objective of the ABC-04 trial was to establish the recommended dose of selumetinib in combination with CisGem in patients with ABC. METHODS: Eligible patients were ≥ 18 years, had histologically or cytologically-confirmed unresectable recurrent or metastatic biliary tract, gallbladder or ampullary carcinoma, WHO performance status 0-2, and adequate major organ function. Patients may have had prior surgery, radiotherapy or adjuvant chemotherapy, but no prior CisGem and no prior chemotherapy for locally advanced or metastatic disease. Patients received cisplatin 25 mg/m(2) plus gemcitabine 1000 mg/m(2) intravenously on days 1 and 8 of a 21-day cycle. Selumetinib capsules were taken daily. Patients received up to 8 cycles of CisGem and could receive selumetinib until disease progression. A dose de-escalation scheme was used to determine the recommended dose of selumetinib. The first dose level was 75 mg bd. Patients were recruited in cohorts of 3 and assessed for dose limiting toxicity (DLT) during the first cycle of treatment. RESULTS: Thirteen patients were recruited, of whom 12 were evaluable for DLT (1 did not start treatment). All evaluable patients received the starting dose of selumetinib 75 mg bd and one patient experienced a DLT (cardiac chest pain). The median number of days selumetinib was taken (adjusted for the number of days of dose interruptions) was 171.5 (IQR: 75.5 to 344). Two patients remained on treatment at 14 and 19 months post registration. There were 3 temporary and 1 permanent interruptions of selumetinib in cycle 1. Eight patients were evaluable for objective response (RECIST v1.1): 3 had a partial response and 5 stable disease. The median PFS was 6.4 months (IQR 5.2 to 13.7). Toxicities related to selumetinib were mostly related to oedema and rash, grade 1-2 and manageable. Pharmacokinetic analysis showed that the AUC(0-t), AUC(0-∞) and Cmax of selumetinib increased by 12, 11 and 30 % respectively when it was administered with CisGem, while Cmax for the N-desmethyl metabolite of selumetinib decreased by 40 %. There was no evidence that the time of Cmax for selumetinib or N-desmethyl metabolite of selumetinib were different when selumetinib was administered alone or with CisGem. CONCLUSION: The recommended dose of selumetinib when combined with CisGem was 75 mg bd. Translational studies are underway to identify biomarkers that may predict outcome (ClinicalTrials.gov identifier: NCT01242605 July 6(th) 2010)

A bio-inspired microstructure induced by slow injection moulding of cylindrical block copolymers.

It is well known that block copolymers with cylindrical morphology show alignment with shear, resulting in anisotropic mechanical properties. Here we show that well-ordered bi-directional orientation can be achieved in such materials by slow injection moulding. This results in a microstructure, and anisotropic mechanical properties, similar to many natural tissues, making this method attractive for engineering prosthetic fibrous tissues. An application of particular interest to us is prosthetic polymeric heart valve leaflets, mimicking the shape, microstructure and hence performance of the native valve. Anisotropic layers have been observed for cylinder-forming block copolymers centrally injected into thin circular discs. The skin layers exhibit orientation parallel to the flow direction, whilst the core layer shows perpendicularly oriented domains; the balance of skin to core layers can be controlled by processing parameters such as temperature and injection rate. Heart valve leaflets with a similar layered structure have been prepared by injection moulding. Numerical modelling demonstrates that such complex orientation can be explained and predicted by the balance of shear and extensional flow.This is the author-accepted manuscript. It will be under embargo for 12 months after publication. The final version of this article is published by RSC in Soft Matter and can be found here: http://pubs.rsc.org/en/Content/ArticleLanding/2014/SM/C4SM00884G#!divAbstract

Influence of shear flow on vesicles near a wall: a numerical study

We describe the dynamics of three-dimensional fluid vesicles in steady shear flow in the vicinity of a wall. This is analyzed numerically at low Reynolds numbers using a boundary element method. The area-incompressible vesicle exhibits bending elasticity. Forces due to adhesion or gravity oppose the hydrodynamic lift force driving the vesicle away from a wall. We investigate three cases. First, a neutrally buoyant vesicle is placed in the vicinity of a wall which acts only as a geometrical constraint. We find that the lift velocity is linearly proportional to shear rate and decreases with increasing distance between the vesicle and the wall. Second, with a vesicle filled with a denser fluid, we find a stationary hovering state. We present an estimate of the viscous lift force which seems to agree with recent experiments of Lorz et al. [Europhys. Lett., vol. 51, 468 (2000)]. Third, if the wall exerts an additional adhesive force, we investigate the dynamical unbinding transition which occurs at an adhesion strength linearly proportional to the shear rate.Comment: 17 pages (incl. 10 figures), RevTeX (figures in PostScript

Membrane-Proximal Epitope Facilitates Efficient T Cell Synapse Formation by Anti-FcRH5/CD3 and Is a Requirement for Myeloma Cell Killing

The anti-FcRH5/CD3 T cell-dependent bispecific antibody (TDB) targets the B cell lineage marker FcRH5 expressed in multiple myeloma (MM) tumor cells. We demonstrate that TDBs trigger T cell receptor activation by inducing target clustering and exclusion of CD45 phosphatase from the synapse. The dimensions of the target molecule play a key role in the efficiency of the synapse formation. The anti-FcRH5/CD3 TDB kills human plasma cells and patient-derived myeloma cells at picomolar concentrations and results in complete depletion of B cells and bone marrow plasma cells in cynomolgus monkeys. These data demonstrate the potential for the anti-FcRH5/CD3 TDB, alone or in combination with inhibition of PD-1/PD-L1 signaling, in the treatment of MM and other B cell malignancies.This work was supported by a Sir Henry Dale Fellowship (J.R.J.) jointly funded by the Wellcome Trust and the Royal Society (grant number: 099966/Z/12/Z). PhD studentships (S.A.M. and M.J.H.) were funded by the Wellcome Trust (grant number: 102195/Z/13/Z)

Inference of population splits and mixtures from genome-wide allele frequency data

Many aspects of the historical relationships between populations in a species are reflected in genetic data. Inferring these relationships from genetic data, however, remains a challenging task. In this paper, we present a statistical model for inferring the patterns of population splits and mixtures in multiple populations. In this model, the sampled populations in a species are related to their common ancestor through a graph of ancestral populations. Using genome-wide allele frequency data and a Gaussian approximation to genetic drift, we infer the structure of this graph. We applied this method to a set of 55 human populations and a set of 82 dog breeds and wild canids. In both species, we show that a simple bifurcating tree does not fully describe the data; in contrast, we infer many migration events. While some of the migration events that we find have been detected previously, many have not. For example, in the human data we infer that Cambodians trace approximately 16% of their ancestry to a population ancestral to other extant East Asian populations. In the dog data, we infer that both the boxer and basenji trace a considerable fraction of their ancestry (9% and 25%, respectively) to wolves subsequent to domestication, and that East Asian toy breeds (the Shih Tzu and the Pekingese) result from admixture between modern toy breeds and "ancient" Asian breeds. Software implementing the model described here, called TreeMix, is available at http://treemix.googlecode.comComment: 28 pages, 6 figures in main text. Attached supplement is 22 pages, 15 figures. This is an updated version of the preprint available at http://precedings.nature.com/documents/6956/version/

Το λογισμικό SpatialAnalyzer & εφαρμογές του σε προβλήματα βιομηχανικής γεωδαισίας

This paper reports a first study exploring genomic prediction for adaptation of sorghum [Sorghum bicolor (L.) Moench] to drought-stress (D-ET) and nonstress (W-ET) environment types. The objective was to evaluate the impact of both modeling genotype × environment interaction (G×E) and accounting for heterogeneous variances of marker effects on genomic prediction of parental breeding values for grain yield within and across environment types (ETs). For this aim, different genetic covariance structures and different weights for individual markers were investigated in best linear unbiased prediction (BLUP)-based prediction models. The BLUP models used a kinship matrix combining pedigree and genomic information, termed K-BLUP. The dataset comprised testcross yield performances under D-ET and W-ET as well as pedigree and genomic data. In general, modeling G×E increased predictive ability and reduced empirical bias of genomic predictions for broad adaptation across both ETs vs. models that ignored G×E by fitting a main genetic effect only. Genomic predictions for specific adaptation to D-ET or W-ET were also improved by K-BLUP models that explicitly accommodated G×E and used data from both ETs relative to prediction models that used data from the targeted ET exclusively or models that used all the data but assumed no G×E. Allowing for heterogeneous marker variances through weighted K-BLUP produced clear increments (43–72%) in predictive ability of genomic prediction for grain yield in all adaptation scenarios. We conclude that G×E as well as locus-specific genetic variances should be accommodated in genomic prediction models to improve adaptability of sorghum to variable environmental conditions

Coalescent-based species delimitation in the sand lizards of the Liolaemus wiegmannii complex (Squamata: Liolaemidae)

Coalescent-based algorithms coupled with the access to genome-wide data have become powerful tools forassessing questions on recent or rapid diversification, as well as delineating species boundaries in the absence of reciprocal monophyly. In southern South America, the diversification of Liolaemus lizards during the Pleistocene is well documented and has been attributed to the climatic changes that characterized this recent period of time. Past climatic changes had harsh effects at extreme latitudes, including Patagonia, but habitat changes at intermediate latitudes of South America have also been recorded, including expansion of sand fields over northern Patagonia and Pampas). In this work, we apply a coalescent-based approach to study the diversification of the Liolaemus wiegmannii species complex, a morphologically conservative clade that inhabits sandy soils across northwest and south-central Argentina, and the south shores of Uruguay. Using four standard sequence markers (mitochondrial DNA and three nuclear loci) along with ddRADseq data we inferred species limits and a time calibrated species tree for the L. wiegmannii complex in order to evaluate the influence of Quaternary sand expansion/retraction cycles on diversification. We also evaluated the evolutionary independence of the recently described L. gardeli and inferred its phylogenetic position relative to L. wiegmannii. We find strong evidence for six allopatric candidate species within L. wiegmannii, which diversified during the Pleistocene. The Great Patagonian Glaciation (∼1 million years before present) likely split the species complex into two main groups: one composed of lineages associated with sub-Andean sedimentary formations, and the other mostly related to sand fields in the Pampas and northern Patagonia. We hypothesize that early speciation within L. wiegmannii was influenced by the expansion of sand dunes throughout central Argentina and Pampas. Finally, L. gardeli is supported as a distinct lineage nested within the L. wiegmannii complex.Fil: Villamil, Joaquín. Universidad de la República. Facultad de Ciencias; UruguayFil: Avila, Luciano Javier. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico para el Estudio de los Ecosistemas Continentales; ArgentinaFil: Morando, Mariana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico para el Estudio de los Ecosistemas Continentales; ArgentinaFil: Sites, Jack W.. University Brigham Young; Estados UnidosFil: Leaché, Adam D.. University of Washington; Estados UnidosFil: Maneyro, Raúl. Universidad de la República. Facultad de Ciencias; UruguayFil: Camargo Bentaberry, Arley. Universidad de la República; Urugua