1,574 research outputs found

    The dynamic phenomena of a tethered satellite: NASA's first Tethered Satellite Mission, TSS-1

    Get PDF
    The tethered satellite system (TSS) was envisioned as a means of extending a satellite from its base (space shuttle, space station, space platform) into a lower or higher altitude in order to more efficiently acquire data and perform science experiments. This is accomplished by attaching the satellite to a tether, deploying it, then reeling it in. When its mission is completed, the satellite can be returned to its base for reuse. If the tether contains a conductor, it can also be used as a means to generate and flow current to and from the satellite to the base. When current is flowed, the tether interacts with the Earth's magnetic field, deflecting the tether. When the current flows in one direction, the system becomes a propulsive system that can be used to boost the orbiting system. In the other direction, it is a power generating system. Pulsing the current sets up a dynamic oscillation in the tether, which can upset the satellite attitude and preclude docking. A basic problem occurs around 400-m tether length, during satellite retrieval when the satellite's pendulous (rotational) mode gets in resonance with the first lateral tether string mode. The problem's magnitude is determined by the amount of skiprope present coming into this resonance condition. This paper deals with the tethered satellite, its dynamic phenomena, and how the resulting problems were solved for the first tethered satellite mission (TSS-1). Proposals for improvements for future tethered satellite missions are included. Results from the first tethered satellite flight are summarized

    Instability and dripping of electrified liquid films flowing down inverted substrates

    Get PDF
    We consider the gravity-driven flow of a perfect dielectric, viscous, thin liquid film, wetting a flat substrate inclined at a nonzero angle to the horizontal. The dynamics of the thin film is influenced by an electric field which is set up parallel to the substrate surface—this nonlocal physical mechanism has a linearly stabilizing effect on the interfacial dynamics. Our particular interest is in fluid films that are hanging from the underside of the substrate; these films may drip depending on physical parameters, and we investigate whether a sufficiently strong electric field can suppress such nonlinear phenomena. For a non-electrified flow, it was observed by Brun et al. [Phys. Fluids 27, 084107 (2015)] that the thresholds of linear absolute instability and dripping are reasonably close. In the present study, we incorporate an electric field and analyze the absolute and convective instabilities of a hierarchy of reduced-order models to predict the dripping limit in parameter space. The spatial stability results for the reduced-order models are verified by performing an impulse-response analysis with direct numerical simulations (DNS) of the Navier–Stokes equations coupled to the appropriate electrical equations. Guided by the results of the linear theory, we perform DNS on extended domains with inflow and outflow conditions (mimicking an experimental setup) to investigate the dripping limit for both non-electrified and electrified liquid films. For the latter, we find that the absolute instability threshold provides an order-of-magnitude estimate for the electric-field strength required to suppress dripping; the linear theory may thus be used to determine the feasibility of dripping suppression given a set of geometrical, fluid, and electrical parameters

    Ground state magnetic dipole moment of 35K

    Full text link
    The ground state magnetic moment of 35K has been measured using the technique of nuclear magnetic resonance on beta-emitting nuclei. The short-lived 35K nuclei were produced following the reaction of a 36Ar primary beam of energy 150 MeV/nucleon incident on a Be target. The spin polarization of the 35K nuclei produced at 2 degrees relative to the normal primary beam axis was confirmed. Together with the mirror nucleus 35S, the measurement represents the heaviest T = 3/2 mirror pair for which the spin expectation value has been obtained. A linear behavior of gp vs. gn has been demonstrated for the T = 3/2 known mirror moments and the slope and intercept are consistent with the previous analysis of T = 1/2 mirror pairs.Comment: 14 pages, 5 figure

    Nuclear Magnetic Moment of the 57Cu Ground State

    Full text link
    The nuclear magnetic moment of the ground state of 57Cu has been measured to be 2.00 +/- 0.05 nuclear magnetons (nm) using the beta-NMR technique. Together with the known magnetic moment of the mirror partner 57Ni, the spin extraction value was extracted as -0.78 +/- 0.13. This is the heaviest isospin T=1/2 mirror pair above the 40Ca region, for which both ground state magnetic moments have been determined. Shell model calculations in full fp shell giving mu(57Cu)~2.4 nm and ~0.5 imply significant shell breaking at 56Ni with the neutron number N=28.Comment: 4 pages, 3 figures, accepted in PR

    Half-life and spin of 60Mn^g

    Get PDF
    A value of 0.28 +/- 0.02 s has been deduced for the half-life of the ground state of 60Mn, in sharp contrast to the previously adopted value of 51 +/- 6 s. Access to the low-spin 60Mn ground state was accomplished via beta decay of the 0+ 60Cr parent nuclide. New, low-energy states in 60Mn have been identified from beta-delayed gamma-ray spectroscopy. The new, shorter half-life of 60Mn^g is not suggestive of isospin forbidden beta decay, and new spin and parity assignments of 1+ and 4+ have been adopted for the ground and isomeric beta-decaying states, respectively, of 60Mn.Comment: 13 pages, 5 figures, Accepted for publication in Phys. Rev.
    corecore