Thin structure of steel St52, 3N and possible reasons of defect of large-capacity billets AT "YURMASH"

Electron-microscopic and x-ray investigations of structurally-phase and intense-deformed condition of material made of defective and conditional forged billet at «Yurmash» have been carried out. It is ascertained that in steel made from the defective forged piece the fraction of perlite is 1,5...2 times higher and lamellar perlite prevails. Local long-range tensions in both conditions of material are commensurable with fluidity limit. The content of sulfides is considerably higher in the steel made from the defective billet. They are located in the body of ferrite grains and along the interfaces. In the material made from the conditional forging they are located only inside of grains. The scalar density of dislocations in ferrite grains and in ferrite layers of perlite of the defected billet is one and a half time higher than in conditional metal. All the totality of the listed above circumstances allows stating that the main cause of cracking of large-capacity billets made of steel St52, 3N is not a full conformity of the chemical compound to branded requirements

Use of Technogenic Silica Fume and Brown Coal Semi-Coke in the Technology of Silicon Carbide

The paper describes thermodynamic experiments to determine the optimal temperature and time modes for the carbide production process from the briquette charge comprising silica fume and brown coal semi-coke, conditions for chemical enriching of silicon carbide, its phase, chemical and granulometric compositions and particle morphology

Titanium Carbide: Nanotechnology, Properties, Application

The paper develops scientific and technological bases for fabrication of titanium carbide which is a nanocomponent of composite materials. The authors determine optimum technology specifications and the main titanium carbide properties: fineness of titaniferous raw materials, carbide-forming agent quantity, set temperature of plasma flow, tempering temperature, titanium carbide yield, productivity, specific surface, size and shape of particles. The paper includes equations to describe how the major specifications of the fabrication technique influence the content of titanium carbide and free carbon in the end product

Optimizing Technological Parameters of the Reduction Processes in Treating Steels in a Ladle Furnace

This work reports the possible development of reduction processes when treating the molten metal and slag using a ladle furnace under conditions of intensive stirring with an inert gas. The industrial data have been received, confirming the possibility of decreasing the concentration of ferrous and manganese oxides in the slag and stabilizing the contents of manganese and silicon in the metal

Development and Study of Hard-Facing Materials on the Base of Heat-Resisting High-Hardness Steels for Plasma-Jet Hard- Facing in Shielding-Doping Nitrogen Atmosphere

The authors develop hard-facing materials on the base of heat-resisting highhardness steels for plasma-jet hard-facing in nitrogen atmosphere for manufacturing parts of mining and metallurgic equipment which significantly simplify the production process and effect a saving when producing bimetallic parts and tools

Extraction of Chromium from Carbon Ferrochromium Residual Wastes

This work reports the problem of processing residual wastes after producing carbon ferrochrome by recycling dust using a hydrometallurgical method with the purpose of extracting the basic component - chromium. The X-ray diffraction analysis results, chemical and granulometric compositions of dust from the carbon ferrochrome production are given. The method for the production of chemical-enrichment concentrate (CEC) by processing ferrous dust is described, with obtaining a middling product - sodium mono-chromate with its further reduction to chromium hydroxide, followed by autoclave leaching, and resulting in the production of chemically enriched chrome concentrate. The plant used for autoclave leaching and filtering is schematically depicted. The smelting process of metallic chromium using the ladle aluminothermic method is described

Search for the exotic Θ+\Theta^+ resonance in the NOMAD experiment

A search for exotic Theta baryon via Theta -> proton +Ks decay mode in the NOMAD muon neutrino DIS data is reported. The special background generation procedure was developed. The proton identification criteria are tuned to maximize the sensitivity to the Theta signal as a function of xF which allows to study the Theta production mechanism. We do not observe any evidence for the Theta state in the NOMAD data. We provide an upper limit on Theta production rate at 90% CL as 2.13 per 1000 of neutrino interactions.Comment: Accepted to European Physics Journal

Inclusive production of ρ0(770),f0(980)\rho^{0}(770), f_0(980) and f2(1270)f_2(1270) mesons in νμ\nu_{\mu} charged current interactions

The inclusive production of the meson resonances $\rho^{0}(770)$, $f_0(980)$ and $f_2(1270)$ in neutrino-nucleus charged current interactions has been studied with the NOMAD detector exposed to the wide band neutrino beam generated by 450 GeV protons at the CERN SPS. For the first time the $f_{0}(980)$ meson is observed in neutrino interactions. The statistical significance of its observation is 6 standard deviations. The presence of $f_{2}(1270)$ in neutrino interactions is reliably established. The average multiplicity of these three resonances is measured as a function of several kinematic variables. The experimental results are compared to the multiplicities obtained from a simulation based on the Lund model. In addition, the average multiplicity of $\rho^{0}(770)$ in antineutrino - nucleus interactions is measured.Comment: 23 pages, 14 figures, 8 tables. To appear in Nucl. Phys.

A combined analysis of short-baseline neutrino experiments in the (3+1) and (3+2) sterile neutrino oscillation hypotheses

We investigate adding two sterile neutrinos to resolve the apparent tension existing between short-baseline neutrino oscillation results and CPT-conserving, four-neutrino oscillation models. For both (3+1) and (3+2) models, the level of statistical compatibility between the combined dataset from the null short-baseline experiments Bugey, CHOOZ, CCFR84, CDHS, KARMEN, and NOMAD, on the one hand; and the LSND dataset, on the other, is computed. A combined analysis of all seven short-baseline experiments, including LSND, is also performed, to obtain the favored regions in neutrino mass and mixing parameter space for both models. Finally, four statistical tests to compare the (3+1) and the (3+2) hypotheses are discussed. All tests show that (3+2) models fit the existing short-baseline data significantly better than (3+1) models.Comment: 16 pages, 15 figures. Added NOMAD data to the analysis, one statistical test, and two figures. References and text added. Version submitted to PR