Safety and CO2 emissions: Implications of using organic fluids in a ship’s waste heat recovery system

Current Marine Policies and regulations greatly favour the use of efficiency enhancing technologies such as the Organic Rankine Cycle (ORC) waste heat recovery systems (WHRS), through the entry into force of International Maritime Organisation (IMO) Energy Efficiency Design Index (EEDI). However, safety regulations such as IMO Safety Of Life At Sea (SOLAS), International Gas Code and Classification Societies still consider the use of highly flammable organic fluids on board ships as hazardous and undesirable, requiring special Administration approval. The benefits of organic fluids in emerging technologies will likely increase their usefulness on board in the near future. Furthermore, current ship safety systems and integrated platform management systems greatly reduce the risks associated with their low flash point making them acceptable for marine use given specific design considerations. This paper studies the case of an Aframax tanker navigating the route North Sea – Naantali, Finland using a slow speed diesel engine. A code with a multi-objective optimization approach generated explicitly for this purpose produces different optimal WHRS designs for the vessel’s operating profile. The WHRS is installed after the turbo compressors in the exhaust gas system, where it absorbs part of the available waste heat and converts it to electricity using a generator. This results in a reduction in fuel consumption, hence decreasing the emission of greenhouse gases. The different optimal designs are compared with a steam WHRS to show the strengths and weaknesses of using an ORC WHRS on board. The ORC technology is at its early stages of development in the marine field, it is important that safety policies follow the evolution of the technology and its associated safety equipment. This paper will serve to recognize the specific safety considerations associated with the ORC and highlight the advantages of carrying organic fluids on board as a solution to increasing CO2 emission restrictions and other environmental concerns

An Empirical Study of Real-World SPARQL Queries

Understanding how users tailor their SPARQL queries is crucial when designing query evaluation engines or fine-tuning RDF stores with performance in mind. In this paper we analyze 3 million real-world SPARQL queries extracted from logs of the DBPedia and SWDF public endpoints. We aim at finding which are the most used language elements both from syntactical and structural perspectives, paying special attention to triple patterns and joins, since they are indeed some of the most expensive SPARQL operations at evaluation phase. We have determined that most of the queries are simple and include few triple patterns and joins, being Subject-Subject, Subject-Object and Object-Object the most common join types. The graph patterns are usually star-shaped and despite triple pattern chains exist, they are generally short.Comment: 1st International Workshop on Usage Analysis and the Web of Data (USEWOD2011) in the 20th International World Wide Web Conference (WWW2011), Hyderabad, India, March 28th, 201

Reliability of shoulder rotators isometric strength test using a novel pulley electromechanical dynamometer. Influence of the assessment position

Indexación: Scopus.Background: The shoulder complex, because of its relatively extensive freedom of motion, offers a great variety of testing positions and articular planes for strength examination. Despite this, reliability of results are not clearly addressed. A novel pulley electromechanical dynamometer (FED) (functional electronic dynamometer) could be an alternative in strength assessment, however, the relative and absolute reliability have not been reported in the literature. Objectives: To report the results of shoulder internal (IR) and rotators (ER) peak torque reliability in two assessment positions by FED in asymptomatic subjects. Methods: Fifty-two healthy college students were included and tested twice within a two week period. In a supine position, the subjects randomly performed four isometric strength tests (i.e. IR at 40°, IR at 90°, ER at 40°, and ER at 90° of shoulder abduction). Results: The intra-class correlation coefficients (ICC) for relative reliability at 90° were 0.96 (0.94-0.98) for IR and 0.94 (0.90-0.96) for ER. ICC at 40° were 0.89 (0.80-0.94) for IR and 0.97 (0.94-0.98) for ER. Absolute reliability expressed as standard error of measurement compared to the mean (SEM%) and 95% confidence interval (CI) of minimal detectable change percentage (MDC%) at 90° were 8.8% (-20.8, 28.4%) and 11.4% (-28.0, 35.2%) for ER. MDC% at 40° were 12.6% (-35.5, 34.8%) for IR and 18.1% (-28.1, 35, 2%) for ER. Conclusions: Isometric strength testing protocol using FED showed an excellent reproducibility and can be safely used in clinical settings to monitor the strength changes in a group of individuals or in a single individual. © 2018, Asian Journal of Sports Medicine.http://asjsm.com/en/articles/60406.htm

Secuenciación dinámica de sistemas de fabricación flexible mediante aprendizaje automático: análisis de los principales sistemas de secuenciación existentes

Una forma habitual de secuenciar de modo dinámico los trabajos en los sistemas de fabricación es mediante el empleo de reglas de secuenciación. Sin embargo, el problema que presenta este método es que el comportamiento del sistema de fabricación dependerá de su estado, y no existe una regla que supere a las demás en todos los posibles estados que puede presentar el sistema de fabricación. Por lo tanto, sería interesante usar en cada momento la regla más adecuada. Para lograr este objetivo, se pueden utilizar sistemas de secuenciación que emplean aprendizaje automático que permiten, analizando el comportamiento previo del sistema de fabricación (ejemplos de entrenamiento), obtener el conocimiento necesario para determinar la regla de secuenciación más apropiada en cada instante. En el presente trabajo se realiza una revisión de los principales sistemas de secuenciación existentes en la literatura que utilizan aprendizaje automático para variar de forma dinámica la regla de secuenciación empleada en cada momento

Integrated supply of stemwood and residual biomass to forest-based biorefineries

The demand for forest biomass as raw material for a wide range of products in the developing bioeconomy is expected to increase. Along with a constant pressure on forestry to increase its productivity, this development has led to the search for new procurement methods and new assortments. The present study assessed innovative supply chain practices, with a particular focus on the integrated supply of stemwood and residual tree parts. The assortments considered included tree sections, long tops, saw logs with stump cores and small whole trees from thinnings. The assessment included geographically explicit modelling of the supply chain operations and estimation of supply cost and energy use for three industrial locations in Northern Sweden. The innovative supply chains were compared to conventional, separate, harvest of stemwood and logging residues. We conclude that integrated harvest of tops and branches with stemwood assortments, as well as whole-tree harvest in early thinnings, has a significant potential to reduce the supply cost for the non-stemwood assortments. Stump wood generally remains the most expensive assortment. The energy use analysis confirms earlier research showing that the energy input is relatively small compared to the energy content of the harvested feedstock

Predictions for Triple Stars with and without a Pulsar in Star Clusters

Though about 80 pulsar binaries have been detected in globular clusters so far, no pulsar has been found in a triple system in which all three objects are of comparable mass. Here we present predictions for the abundance of such triple systems, and for the most likely characteristics of these systems. Our predictions are based on an extensive set of more than 500 direct simulations of star clusters with primordial binaries, and a number of additional runs containing primordial triples. Our simulations employ a number N_{tot} of equal mass stars from N_{tot}=512 to N_{tot}=19661 and a primordial binary fraction from 0-50%. In addition, we validate our results against simulations with N=19661 that include a mass spectrum with a turn-off mass at 0.8 M_{sun}, appropriate to describe the old stellar populations of galactic globular clusters. Based on our simulations, we expect that typical triple abundances in the core of a dense cluster are two orders of magnitude lower than the binary abundances, which in itself already suggests that we don't have to wait too long for the first comparable-mass triple with a pulsar to be detected.Comment: 11 pages, minor changes to match MNRAS accepted versio