Towards the noise reduction of piezoelectrical-driven synthetic jet actuators

This paper details an experimental investigation aimed at reducing the noise output of piezoelectrical-driven synthetic jet actuators without compromising peak jet velocity. Specifically, the study considers double-chamber ('back-to-back') actuators for anti-phase noise suppression and corrugated-lobed orifices as a method to enhance turbulent mixing of the jets to suppress jet noise. The study involved the design, manufacture and bench test of interchangeable actuator hardware. Hot-wire anemometry and microphone recordings were employed to acquire velocity and noise measurements respectively for each chamber configuration and orifice plate across a range of excitation frequencies and for a fixed input voltage. The data analysis indicated a 32% noise reduction (20 dBA) from operating a singlechamber, circular orifice SJA to a double-chamber, corrugated-lobed orifice SJA at the Helmholtz resonant frequency. Results also showed there was a small reduction in peak jet velocity of 7% (~3 m/s) between these two cases based on orifices of the same discharge area. Finally, the electrical-to-fluidic power conversion efficiency of the double-chamber actuator was found to be 15% across all orifice designs at the resonant frequency; approximately double the efficiency of a single-chamber actuator. This work has thus demonstrated feasible gains in noise reduction and power efficiency through synthetic jet actuator design

Effects of sheep grazing exclusion on alpine tall tussock grassland

Substantial areas of alpine tall tussock grasslands are being retired from grazing as part of Crown pastoral lease tenure review because of the perceived negative impact of grazing livestock. However, relatively little is known about the effect of sheep exclusion on these grasslands. We analysed data from five grazing exclosure plots over a 6-year period to examine the effect merino sheep have relative to hares and rabbits in alpine tall tussock grasslands used for summer grazing. Unfortunately, because of snow damage to fences, we were unable to detect any significant hare and rabbit effects. Over the time of this study, there was no evidence for significant vegetation recovery after exclusion of sheep grazing. This may be because of other grazing animals in the system, or the low stocking rates and non-random grazing behaviour of merino ewes. There was, however, a significant increase in the cover of exotic herbs Pilosella officinarum and P. praealta and a significant decrease in the cover of native tussocks Festuca novae-zelandiae and Poa colensoi regardless of grazing exclusion. While this pattern has been previously documented in studies at lower elevations and usually with a history of burning, our results demonstrate that alpine grasslands with no burning history can also be invaded by Pilosella spp. over relatively short time frames. Replicated grazing exclosure trials such as the one described in this paper are important for providing objective information on both long-term trends in vegetation composition and the impacts of grazing animals in alpine grasslands as a basis for making informed decisions on their future management

Modeling the Subsurface Structure of Sunspots

While sunspots are easily observed at the solar surface, determining their subsurface structure is not trivial. There are two main hypotheses for the subsurface structure of sunspots: the monolithic model and the cluster model. Local helioseismology is the only means by which we can investigate subphotospheric structure. However, as current linear inversion techniques do not yet allow helioseismology to probe the internal structure with sufficient confidence to distinguish between the monolith and cluster models, the development of physically realistic sunspot models are a priority for helioseismologists. This is because they are not only important indicators of the variety of physical effects that may influence helioseismic inferences in active regions, but they also enable detailed assessments of the validity of helioseismic interpretations through numerical forward modeling. In this paper, we provide a critical review of the existing sunspot models and an overview of numerical methods employed to model wave propagation through model sunspots. We then carry out an helioseismic analysis of the sunspot in Active Region 9787 and address the serious inconsistencies uncovered by \citeauthor{gizonetal2009}~(\citeyear{gizonetal2009,gizonetal2009a}). We find that this sunspot is most probably associated with a shallow, positive wave-speed perturbation (unlike the traditional two-layer model) and that travel-time measurements are consistent with a horizontal outflow in the surrounding moat.Comment: 73 pages, 19 figures, accepted by Solar Physic

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

Measurement of D*+/- meson production in jets from pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

This paper reports a measurement of D*+/- meson production in jets from proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV at the CERN Large Hadron Collider. The measurement is based on a data sample recorded with the ATLAS detector with an integrated luminosity of 0.30 pb^-1 for jets with transverse momentum between 25 and 70 GeV in the pseudorapidity range |eta| < 2.5. D*+/- mesons found in jets are fully reconstructed in the decay chain: D*+ -> D0pi+, D0 -> K-pi+, and its charge conjugate. The production rate is found to be N(D*+/-)/N(jet) = 0.025 +/- 0.001(stat.) +/- 0.004(syst.) for D*+/- mesons that carry a fraction z of the jet momentum in the range 0.3 < z < 1. Monte Carlo predictions fail to describe the data at small values of z, and this is most marked at low jet transverse momentum.Comment: 10 pages plus author list (22 pages total), 5 figures, 1 table, matches published version in Physical Review

Search for supersymmetry in final states with jets, missing transverse momentum and one isolated lepton in sqrt{s} = 7 TeV pp collisions using 1 fb-1 of ATLAS data

We present an update of a search for supersymmetry in final states containing jets, missing transverse momentum, and one isolated electron or muon, using 1.04 fb^-1 of proton-proton collision data at sqrt{s} = 7 TeV recorded by the ATLAS experiment at the LHC in the first half of 2011. The analysis is carried out in four distinct signal regions with either three or four jets and variations on the (missing) transverse momentum cuts, resulting in optimized limits for various supersymmetry models. No excess above the standard model background expectation is observed. Limits are set on the visible cross-section of new physics within the kinematic requirements of the search. The results are interpreted as limits on the parameters of the minimal supergravity framework, limits on cross-sections of simplified models with specific squark and gluino decay modes, and limits on parameters of a model with bilinear R-parity violation.Comment: 18 pages plus author list (30 pages total), 9 figures, 4 tables, final version to appear in Physical Review

Glastir Monitoring & Evaluation Programme. Second year annual report

What is the purpose of Glastir Monitoring and Evaluation Programme? Glastir is the main scheme by which the Welsh Government pays for environmental goods and services whilst the Glastir Monitoring and Evaluation Programme (GMEP) evaluates the scheme’s success. Commissioning of the monitoring programme in parallel with the launch of the Glastir scheme provides fast feedback and means payments can be modified to increase effectiveness. The Glastir scheme is jointly funded by the Welsh Government (through the Rural Development Plan) and the EU. GMEP will also support a wide range of other national and international reporting requirements. What is the GMEP approach? GMEP collects evidence for the 6 intended outcomes from the Glastir scheme which are focussed on climate change, water and soil quality, biodiversity, landscape, access and historic environment, woodland creation and management. Activities include; a national rolling monitoring programme of 1km squares; new analysis of long term data from other schemes combining with GMEP data where possible; modelling to estimate future outcomes so that adjustments can be made to maximise impact of payments; surveys to assess wider socio-economic benefits; and development of novel technologies to increase detection and efficiency of future assessments. How has GMEP progressed in this 2nd year? 90 GMEP squares were surveyed in Year 2 to add to the 60 completed in Year 1 resulting in 50% of the 300 GMEP survey squares now being completed. Squares will be revisited on a 4 year cycle providing evidence of change in response to Glastir and other pressures such as changing economics of the farm business, climate change and air pollution. This first survey cycle collects the baseline against which future changes will be assessed. This is important as GMEP work this year has demonstrated land coming into the scheme is different in some respects to land outside the scheme. Therefore, future analysis to detect impact of Glastir will be made both against the national backdrop from land outside the scheme and this baseline data from land in scheme. A wide range of analyses of longterm data has been completed for all Glastir Outcomes with the exception of landscape quality and historic features condition for which limited data is available. This has involved combining data with 2013/14 GMEP data when methods allow. Overall analysis of long term data indicates one of stability but with little evidence of improvement with the exception of headwater quality, greenhouse gas emissions and woodland area for which there has been improvement over the last 20 years. Some headline statistics include: 51% of historic features in excellent or sound condition; two thirds of public rights of way fully open and accessible; improvement in hedgerow management with 85% surveyed cut in the last 3 years but < 1% recently planted; 91% of streams had some level of modification but 60% retained good ecological quality; no change topsoil carbon content over last 25 years. What is innovative? GMEP has developed various new metrics to allow for more streamlined reporting in the future. For example a new Priority Bird species Index for Wales which combines data from 35 species indicates at least half have stable or increasing populations. The new GMEP Visual Quality Landscape Index has been tested involving over 2600 respondents. Results have demonstrated its value as an objective and repeatable method for quantifying change in visual landscape quality. A new unified peat map for Wales has been developed which has been passed to Glastir Contract Managers to improve targeting of payments when negotiating Glastir contracts. An estimate of peat soil contribution to current greenhouse gas emissions due to human modification has been calculated. Models have allowed quantification of land area helping to mitigate rainfall runoff. We are using new molecular tools to explore the effects of Glastir on soil organisms and satellite technologies to quantify e.g. small woody features and landcover change. Finally we are using a community approach to develop a consensus on how to define and report change in High Nature Value Farmland which will be reported in the Year 3 GMEP report

Reducing heterotic M-theory to five dimensional supergravity on a manifold with boundary

This paper constructs the reduction of heterotic $M$-theory in eleven dimensions to a supergravity model on a manifold with boundary in five dimensions using a Calabi-Yau three-fold. New results are presented for the boundary terms in the action and for the boundary conditions on the bulk fields. Some general features of dualisation on a manifold with boundary are used to explain the origin of some topological terms in the action. The effect of gaugino condensation on the fermion boundary conditions leads to a `twist' in the chirality of the gravitino which can provide an uplifting mechanism in the vacuum energy to cancel the cosmological constant after moduli stabilisation.Comment: 16 pages, RevTe

Measurement of tau polarization in W->taunu decays with the ATLAS detector in pp collisions at sqrt(s) = 7 TeV

In this paper, a measurement of tau polarization in W->taunu decays is presented. It is measured from the energies of the decay products in hadronic tau decays with a single final state charged particle. The data, corresponding to an integrated luminosity of 24 pb^-1, were collected by the ATLAS experiment at the Large Hadron Collider in 2010. The measured value of the tau polarization is Ptau = -1.06 +/- 0.04 (stat) + 0.05 (syst) - 0.07 (syst), in agreement with the Standard Model prediction, and is consistent with a physically allowed 95% CL interval [-1,-0.91]. Measurements of tau polarization have not previously been made at hadron colliders.Comment: 10 pages plus author list (25 pages total), 4 figures, 4 tables, revised author list, matches published EPJC versio

Readiness of the ATLAS liquid argon calorimeter for LHC collisions

The ATLAS liquid argon calorimeter has been operating continuously since August 2006. At this time, only part of the calorimeter was readout, but since the beginning of 2008, all calorimeter cells have been connected to the ATLAS readout system in preparation for LHC collisions. This paper gives an overview of the liquid argon calorimeter performance measured in situ with random triggers, calibration data, cosmic muons, and LHC beam splash events. Results on the detector operation, timing performance, electronics noise, and gain stability are presented. High energy deposits from radiative cosmic muons and beam splash events allow to check the intrinsic constant term of the energy resolution. The uniformity of the electromagnetic barrel calorimeter response along eta (averaged over phi) is measured at the percent level using minimum ionizing cosmic muons. Finally, studies of electromagnetic showers from radiative muons have been used to cross-check the Monte Carlo simulation. The performance results obtained using the ATLAS readout, data acquisition, and reconstruction software indicate that the liquid argon calorimeter is well-prepared for collisions at the dawn of the LHC era.ATLAS Collaboration, for complete list of authors see http://dx.doi.org/10.1140/epjc/s10052-010-1354-y</p