The SCARE Statement: Consensus-based surgical case report guidelines

Introduction: Case reports have been a long held tradition within the surgical literature. Reporting guidelines can improve transparency and reporting quality. However, recent consensus-based guidelines for case reports (CARE) are not surgically focused. Our objective was to develop surgical case report guidelines. Methods: The CARE statement was used as the basis for a Delphi consensus. The Delphi questionnaire was administered via Google Forms and conducted using standard Delphi methodology. A multidisciplinary group of surgeons and others with expertise in the reporting of case reports were invited to participate. In round one, participants stated how each item of the CARE statement should be changed and what additional items were needed. Revised and additional items from round one were put forward into a further round, where participants voted on the extent of their agreement with each item, using a nine-point Likert scale, as proposed by the Grading of Recommendations, Assessment, Development and Evaluations (GRADE) working group. Results: In round one, there was a 64% (38/59) response rate. Following adjustment of the guideline with the incorporation of recommended changes, round two commenced and there was an 83% (49/59) response rate. All but one of the items were approved by the participants, with Likert scores 7–9 awarded by >70% of respondents. The final guideline consists of a 14-item checklist. Conclusion: We present the SCARE Guideline, consisting of a 14-item checklist that will improve the reporting quality of surgical case reports

Search for High-Mass Resonances Decaying to τν in pp Collisions at √s=13 TeV with the ATLAS Detector

A search for high-mass resonances decaying to τν using proton-proton collisions at √s=13 TeV produced by the Large Hadron Collider is presented. Only τ-lepton decays with hadrons in the final state are considered. The data were recorded with the ATLAS detector and correspond to an integrated luminosity of 36.1 fb−1. No statistically significant excess above the standard model expectation is observed; model-independent upper limits are set on the visible τν production cross section. Heavy W′ bosons with masses less than 3.7 TeV in the sequential standard model and masses less than 2.2–3.8 TeV depending on the coupling in the nonuniversal G(221) model are excluded at the 95% credibility level

Operation and performance of the ATLAS Tile Calorimeter in Run 1

The Tile Calorimeter is the hadron calorimeter covering the central region of the ATLAS experiment at the Large Hadron Collider. Approximately 10,000 photomultipliers collect light from scintillating tiles acting as the active material sandwiched between slabs of steel absorber. This paper gives an overview of the calorimeter’s performance during the years 2008–2012 using cosmic-ray muon events and proton–proton collision data at centre-of-mass energies of 7 and 8TeV with a total integrated luminosity of nearly 30 fb−1. The signal reconstruction methods, calibration systems as well as the detector operation status are presented. The energy and time calibration methods performed excellently, resulting in good stability of the calorimeter response under varying conditions during the LHC Run 1. Finally, the Tile Calorimeter response to isolated muons and hadrons as well as to jets from proton–proton collisions is presented. The results demonstrate excellent performance in accord with specifications mentioned in the Technical Design Report

Performance of missing transverse momentum reconstruction with the ATLAS detector using proton–proton collisions at √s = 13 TeV

The performance of the missing transverse momentum (EmissT) reconstruction with the ATLAS detector is evaluated using data collected in proton–proton collisions at the LHC at a centre-of-mass energy of 13 TeV in 2015. To reconstruct EmissT, fully calibrated electrons, muons, photons, hadronically decaying τ -leptons, and jets reconstructed from calorimeter energy deposits and charged-particle tracks are used. These are combined with the soft hadronic activity measured by reconstructed charged-particle tracks not associated with the hard objects. Possible double counting of contributions from reconstructed charged-particle tracks from the inner detector, energy deposits in the calorimeter, and reconstructed muons from the muon spectrometer is avoided by applying a signal ambiguity resolution procedure which rejects already used signals when combining the various EmissT contributions. The individual terms as well as the overall reconstructed EmissT are evaluated with various performance metrics for scale (linearity), resolution, and sensitivity to the data-taking conditions. The method developed to determine the systematic uncertainties of the EmissT scale and resolution is discussed. Results are shown based on the full 2015 data sample corresponding to an integrated luminosity of 3.2 fb−1

Measurement of the t¯tZ and t¯tW cross sections in proton-proton collisions at √s=13 TeV with the ATLAS detector

A measurement of the associated production of a top-quark pair (t¯t) with a vector boson (W, Z) in proton-proton collisions at a center-of-mass energy of 13 TeV is presented, using 36.1  fb−1 of integrated luminosity collected by the ATLAS detector at the Large Hadron Collider. Events are selected in channels with two same- or opposite-sign leptons (electrons or muons), three leptons or four leptons, and each channel is further divided into multiple regions to maximize the sensitivity of the measurement. The t¯tZ and t¯tW production cross sections are simultaneously measured using a combined fit to all regions. The best-fit values of the production cross sections are σt¯tZ=0.95±0.08stat±0.10syst pb and σt¯tW=0.87±0.13stat±0.14syst pb in agreement with the Standard Model predictions. The measurement of the t¯tZ cross section is used to set constraints on effective field theory operators which modify the t¯tZ vertex

Combined measurement of differential and total cross sections in the H → γγ and the H → ZZ* → 4ℓ decay channels at s=13 TeV with the ATLAS detector

A combined measurement of differential and inclusive total cross sections of Higgs boson production is performed using 36.1 fb−1 of 13 TeV proton–proton collision data produced by the LHC and recorded by the ATLAS detector in 2015 and 2016. Cross sections are obtained from measured H→γγ and H→ZZ*(→4ℓ event yields, which are combined taking into account detector efficiencies, resolution, acceptances and branching fractions. The total Higgs boson production cross section is measured to be 57.0−5.9 +6.0 (stat.) −3.3 +4.0 (syst.) pb, in agreement with the Standard Model prediction. Differential cross-section measurements are presented for the Higgs boson transverse momentum distribution, Higgs boson rapidity, number of jets produced together with the Higgs boson, and the transverse momentum of the leading jet. The results from the two decay channels are found to be compatible, and their combination agrees with the Standard Model predictions

Search for pairs of highly collimated photon-jets in pp collisions at √s = 13 TeV with the ATLAS detector

Results of a search for the pair production of photon-jets—collimated groupings of photons—in the ATLAS detector at the Large Hadron Collider are reported. Highly collimated photon-jets can arise from the decay of new, highly boosted particles that can decay to multiple photons collimated enough to be identified in the electromagnetic calorimeter as a single, photonlike energy cluster. Data from proton-proton collisions at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 36.7  fb−1, were collected in 2015 and 2016. Candidate photon-jet pair production events are selected from those containing two reconstructed photons using a set of identification criteria much less stringent than that typically used for the selection of photons, with additional criteria applied to provide improved sensitivity to photon-jets. Narrow excesses in the reconstructed diphoton mass spectra are searched for. The observed mass spectra are consistent with the Standard Model background expectation. The results are interpreted in the context of a model containing a new, high-mass scalar particle with narrow width, X, that decays into pairs of photon-jets via new, light particles, a. Upper limits are placed on the cross section times the product of branching ratios σ×B(X→aa)×B(a→γγ)2 for 200  GeV<mX<2  TeV and for ranges of ma from a lower mass of 100 MeV up to between 2 and 10 GeV, depending upon mX. Upper limits are also placed on σ×B(X→aa)×B(a→3π0)2 for the same range of mX and for ranges of ma from a lower mass of 500 MeV up to between 2 and 10 GeV

Pattern of childhood burn injuries and their management outcome at Bugando Medical Centre in Northwestern Tanzania

Burn injuries constitute a major public health problem and are the leading cause of childhood morbidity and mortality worldwide. There is paucity of published data on childhood burn injuries in Tanzania, particularly the study area. This study was conducted to describe the pattern of childhood burn injuries in our local setting and to evaluate their management outcome. A cross sectional study was conducted at Bugando Medical Centre (in Northwestern Tanzania) over a 3-year period from January 2008 to December 2010. Data was collected using a pre-tested coded questionnaire and statistical analyses performed using SPSS software version 15.0. A total of 342 burned children were studied. Males were mainly affected. Children aged = 2 were the majority accounting for 45.9% of cases. Intentional burn injuries due to child abuse were reported in 2.9% of cases. Scald was the most common type of burns (56.1%). The trunk was the most commonly involved body region (57.3%). Majority of patients (48.0%) sustained superficial burns. Eight (2.3%) patients were HIV positive. Most patients (89.8%) presented to the hospital later than 24 h. The rate of burn wound infection on admission and on 10th day were 32.4% and 39.8% respectively.Staphylococcus aureus were more common on admission wound swabs, with Pseudomonas aeruginosa becoming more evident after 10th day. MRSA was detected in 19.2% of Staphylococcus aureus. Conservative treatment was performed in 87.1% of cases. Surgical treatment mainly skin grafting (65.9%) was performed in 44 (12.9%) of patients. The overall average of the length of hospital stay (LOS) was 22.12 ± 16.62 days. Mortality rate was 11.7%. Using multivariate logistic regression analysis; age of the patient, type of burn, delayed presentation, clothing ignition, %TBSA and severity of burn were found to be significantly associated with LOS (P < 0.001), whereas mortality rate was found to be independently and significantly related to the age of the patient, type of burn, HIV positive with stigmata of AIDS, CD4 count, inhalation injury, %TBSA and severity of burn (P < 0.001). Childhood burn injuries still remain a menace in our environment with virtually unacceptable high morbidity and mortality. There is need for critical appraisal of the preventive measures and management principles currently being practiced

A randomized, controlled, prospective trial to evaluate the haemostatic effect of Lyostypt versus Surgicel in arterial bypass anastomosis: "COBBANA" trial

<p>Abstract</p> <p>Background</p> <p>The development of suture hole bleeding at peripheral arterial bypass anastomoses using PTFE graft prostheses is a common problem in peripheral vascular surgery. Traditionally the problem is managed by compression with surgical swabs and reversal heparin or by using several haemostatic device (e.g. different forms of collagen, oxidized cellulose, gelatine sponge, ethylcyanoacrylate glue or fibrin) with various success. Preclinical data suggest that the haemostatic effect of collagen is stronger than that of oxidized cellulose, but no direct clinical comparison of their hemostatic performance has been published so far.</p> <p>Design</p> <p>This randomized, controlled, prospective trial evaluates the haemostatic effect of Lyostypt versus Surgicel in arterial bypass anastomosis. 28 patients undergoing an elective peripheral vascular reconstruction due to peripheral vascular disease will be included. Suture hole bleeding occurring at the arterial bypass anastomosis using a PTFE prostheses will be stopped by the application of Lyostypt and/or Surgicel. The proximal anastomoses will be randomized intraoperatively. The patients will be allocated into 4 different treatment groups. Group1 Lyostypt distal/Surgicel proximal; Group 2: Lyostypt proximal/Surgicel distal; Group 3: Surgicel distal and proximal; Group 4: Lyostypt distal and proximal. Primary endpoint of the study is time to haemostasis. Secondary endpoints are the number of intraoperatively used haemostatic devices, postoperative mortality within 30 days as well as the intraoperative efficacy rating of the two devices evaluated by the surgeon. As a safety secondary parameter, the local and general complication occurring till 30 ± 10 days postoperatively will also be analysed. After hospital discharge the investigator will examine the enrolled patients again at 30 days after surgery.</p> <p>Discussion</p> <p>The COBBANA trial aims to assess, whether the haemostatic effect of Lyostypt is superior to Surgicel in suture hole bleedings of arterial bypass anastomoses.</p> <p>Trial registration</p> <p>NCT00837954</p