On the Size and Mass of Photo-ionized Clouds in Extended Spiral Galaxy Halos

The size and mass of two circum-galactic medium (CGM) clouds in the halo (impact parameter = 65 kpc) of a nearby late-type galaxy, MGC-01-04-005 ($cz = 1865$ km/s), are investigated using a close triplet of QSO sight lines (the "LBQS Triplet"; Crighton et al. 2010). Far ultraviolet spectra obtained with the Cosmic Origins Spectrograph (COS) aboard the Hubble Space Telescope (HST) find two velocity components in Lyman $\alpha$ at $\sim1830$ and 1900 km/s in two of these sight lines, requiring minimum transverse cloud sizes of $\geq10$ kpc. A plausible, but not conclusive, detection of CIV 1548 \AA\ absorption at the higher velocity in the third sight line suggests an even larger lower limit of $\geq23$ kpc for that cloud. Using various combinations of constraints, including photo-ionization modeling for one absorber, lower limits on masses of these two clouds of $\geq10^6$ M_Sun are obtained. Ground-based imaging and long-slit spectroscopy of MCG -01-04-005 obtained at the Apache Point Observatory (APO) 3.5m telescope find it to be a relatively normal late-type galaxy with a current star formation rate (SFR) of $\sim0.01$ M_Sun per year. Galaxy Evolution Explorer (GALEX) photometry finds an SFR only a few times higher over the last $10^8$ yrs. We conclude that the CGM clouds probed by these spectra are typical in being at impact parameters of 0.4-0.5 R_vir from a rather typical, non-starbursting late-type galaxy so that these size and mass results should be generic for this class. Therefore, at least some CGM clouds are exceptionally large and massive.Comment: 10 pages, 2 tables, 5 figures, Accepted to ApJ Jul 29 201

The ISM Interactions of a Runaway LBV Nebula in the LMC

New observations of the Magellanic Cloud Luminous Blue Variable candidate S119 (HD269687) show the relationship of the star to its environs. Echelle spectroscopy and high-resolution HST imagery reveal an expanding bubble centered on the star. This bubble appears in both Halpha and [NII] and is noticeably brighter on the near (blue-shifted) side. The systemic velocity of both the expanding bubble and the star itself (as seen by the very broad Halpha emission feature in the stellar spectrum) is V_hel=160 km/s whereas the velocity of the superposed LMC ISM is 250-300 km/s. ISM absorption features seen in FUSE spectra reveal components at both stellar and LMC velocities. Thus we conclude that S119 is located within the LMC ISM and that the bubble is interacting strongly with the ISM in a bow shock.Comment: 5 pages in EmulateApJ format, 3 figures Accepted by ApJL See http://fuse.pha.jhu.edu/~danforth/s119

A Direct Detection of Gas Accretion: The Lyman Limit System in 3C 232

The gas added and removed from galaxies over cosmic time greatly affects their stellar populations and star formation rates. QSO absorption studies in close QSO/galaxy pairs create a unique opportunity to study the physical conditions and kinematics of this gas. Here we present new Hubble Space Telescope (HST) images of the QSO/galaxy pair 3C 232/NGC 3067. The quasar spectrum contains a Lyman-limit absorption system (LLS) due to NGC 3067 at cz = 1421 km/s that is associated with the nearby SAB galaxy NGC 3067. Previous work identifies this absorber as a high-velocity cloud (HVC) in NGC 3067 but the kinematics of the absorbing gas, infalling or outflowing, were uncertain. The HST images presented here establish the orientation of NGC 3067 and so establish that the LLS/HVC is infalling. Using this system as a prototype, we extend these results to higher-z Mg II/LLS to suggest that Mg II/LLSs are a sight line sampling of the so-called "cold mode accretion" (CMA) infalling onto luminous galaxies. But to match the observed Mg II absorber statistics, the CMA must be more highly ionized at higher redshifts. The key observations needed to further the study of low-z LLSs is HST/UV spectroscopy, for which a new instrument, the Cosmic Origins Spectrograph, has just been installed greatly enhancing our observational capabilities.Comment: 9 pages, 5 figures, accepted by PAS

A Detailed Analysis of a Cygnus Loop Shock-Cloud Interaction

The XA region of the Cygnus Loop is a complex zone of radiative and nonradiative shocks interacting with interstellar clouds. We combine five far ultraviolet spectral observations from the Hopkins Ultraviolet Telescope (HUT), a grid of 24 IUE spectra and a high-resolution longslit Halpha spectrum to study the spatial emission line variations across the region. These spectral data are placed in context using ground-based, optical emission line images of the region and a far-UV image obtained by the Ultraviolet Imaging Telescope (UIT). The presence of high-ionization ions (OVI, NV, CIV) indicates a shock velocity near 170 km/s while other diagnostics indicate v_shock=140 km/s. It is likely that a large range of shock velocities may exist at a spatial scale smaller than we are able to resolve. By comparing CIV 1550, CIII 977 and CIII] 1909, we explore resonance scattering across the region. We find that a significant column depth is present at all positions, including those not near bright optical/UV filaments. Analysis of the OVI doublet ratio suggests an average optical depth of about unity in that ion while flux measurements of [SiVIII] 1443 suggest a hot component in the region at just below 10^6K. Given the brightness of the OVI emission and the age of the interaction, we rule out the mixing layer interpretation of the UV emission. Furthermore, we formulate a picture of the XA region as the encounter of the blast wave with a finger of dense gas protruding inward from the pre-SN cavity.Comment: 21 pages, 9 figures, accepted by the Astronomical Journal, July 2001 Full resolution figures available at http://fuse.pha.jhu.edu/~danforth/xa

A Detection of Gas Associated with the M 31 Stellar Stream

Detailed studies of stellar populations in the halos of the Milky Way and the Andromeda (M 31) galaxies have shown increasing numbers of tidal streams and dwarf galaxies, attesting to a complicated and on-going process of hierarchical structure formation. The most prominent feature in the halo of M 31 is the Giant Stellar Stream, a structure ~4.5 degrees in extent along the sky, which is close to, but not coincident with the galaxy's minor axis. The stars that make up this stream are kinematically and chemically distinct from the other stars in the halo. Here, we present HST/COS high-resolution ultraviolet absorption spectra of three Active Galactic Nuclei sight lines which probe the M 31 halo, including one that samples gas in the main southwestern portion of the Giant Stream. We see two clear absorption components in many metal species at velocities typical of the M 31 halo and a third, blue-shifted component which arises in the stream. Photoionization modeling of the column density ratios in the different components shows gas in an ionization state typical of that seen in other galaxy halo environments and suggests solar to slightly super-solar metallicity, consistent with previous findings from stellar spectroscopy.Comment: 10 pages, 5 figures, accepted for publication in the Astrophysical Journa

Generation of Porous Structures Using Fused Deposition

The Fused Deposition Modeling process uses hardware and software machine-level language that are very similar to that of a pen-plotter. Consequently, the·use of patterns with poly-lines as basic geometric features, instead of the current method based on filled polygons (monolithic models), can increase its efficiency. In the current study, various toolpath planning methods have been developed to fabricate porous structures. Computational domain decomposition methods can be applied to the physical or to slice-level domains to generate structured and unstructured grids. Also, textures can be created using periodic tiling of the layer with unit cells (squares, honeycombs, etc). Methods 'based on curves include fractal space filling curves and.change of effective road width Within a layer or within a continuous curve. Individual phases can also be placed in binary compositions. In present investigation, a custom software has been developed and implemented to generate build files (SML) and slice files (SSL) for the above-mentioned structures, demonstrating the efficient control ofthe size, shape, and distribution ofporosity.Mechanical Engineerin

Virtual Simulation for Multi-material LM Process

In an ONR funded MURI program, to improve quality of multi-material parts, we've been developing an advanced computer simulation for the multi-material layered manufacturing (LM) process. The CAD models and their .stLfiles are created using. the commercially available software such as I-DEAS and ProE. Using this information, one tool path file per material is generated. Our file preparation algorithm, systematically, layer by layer, integrates all tool path files into one multi-material tool path file. The results of the multi-material tool path are graphically visualized using the simulation algorithm (written in c++ & SGI OpenGL). From a virtual simulation, we can check the LM process, and make the best selection of tool path parameters afterwards. After several trials from design to simulation, if the simulation result is acceptable, the real manufacturing can be started. And the part's quality should be better than a part manufactured without running simulation in advance. This paper will represent .•. new studies on using real toadshapes to get more realistic simulation results. Many parts have been successfully simulated using our method.Mechanical Engineerin