Oceanic Core Complex die off and generation of enhanced mantle upwelling on the Mid-Atlantic Ridge - 22° N

EGU2011-13199 Images of crustal construction provide a key to understand the interplay of magmatism and tectonism while oceanic crust is build up. Bathymetric data show that the crustal construction is highly variable. Areas that are dominated by magmatic processes are adjacent to areas that are highly tectonised and where mantle rocks were found. The Mid-Atlantic Ridge at 22°N shows this high variability along the ridge axis, within the TAMMAR segment, and from segment to segment. However, this strong variability occurs also off-axis, spreading parallel, representing different times in the same area of the ridge. A fracture zone, with limited magma supply, has been replaced by a segment centre with a high magmatic budget. Roughly 4.5 million years ago, the growing magmatic active TAMMAR segment, propagated into the fracture zone, started the migration of the ridge offset to the south, and stopped the formation of core complexes. We present data from seismic refraction and wide-angle reflection profiles that surveyed the crustal structure across the ridge crest of the TAMMAR segment. These yield the crustal structure at the segment centre as a function of melt supply. The results suggest that crust is ~8 km thick near the ridge and decreases in thickness with offset to the ridge axis. Seismic layer 3 shows profound changes in thickness and becomes rapidly one kilometre thicker approx. 5 million years ago. This correlates with gravimetric data and the observed “Bull’s eye” anomaly in that region. Our observations support a temporal change from thick lithosphere with oceanic core complex formation to thin lithosphere with focussed mantle upwelling and segment growing. The formation of ‘thick-crust’ volcanic centre seems to have coincided with the onset of propagation 4.5 million years ago

Crustal structure from teleseismic P-wave receiver function analysis in the Maule Region, Central Chile

EGU2011-12780 A temporary passive seismic network of 31 broad-band stations was deployed in the region around Talca and Constitución between 35°S to 36°S latitude and 71°W to 72.5°W longitude. The network was operated between March and October 2008. Thus, we recorded data prior the magnitude Mw=8.8 earthquake of 27 February 2010 at a latitude of the major slip and surface uplift. The experiment was conducted to address fundamental questions on deformation processes, crustal and mantle structures, and fluid flow. We present results of a teleseismic P receiver function study that covers the coastal region and reaches to the Andes. The aim is to determine the structure and thickness of the continental crust and constrain the state of hydration of the mantle wedge. The P-wave receiver function technique requires large teleseismic earthquakes from different distances and backazimuths. A few percent of the incident P-wave energy from a teleseismic event will be converted into S-wave (Ps) at significant and relatively sharp discontinuities beneath the station. A small converted S phase is produced that arrives at the station within the P wave coda directly after the direct P-wave. The converted Ps phase and their crustal multiples contain information about crustal properties, such as Moho depth and the crustal vp/vs ratio. We use teleseismic events with magnitudes mb > 5.5 at epicentral distances between 30° and 95° to examine P-to-S converted seismic phases. Our preliminary results provide new information about the thickness of the continental crust beneath the coastal region in Central Chile. At most of the stations we observed significant energy from P to S converted waves between 4 and 5 s after the direct P-wave within a positive phase interpreted as the Moho, occurring at 35 to 40 km. The great Maule earthquake of 27 February 2010 nucleated up-dip of the continental Moho. The rupture of this earthquake seems to have propagated down-dip of the Moho. The Moho reflection show a positive polarity, indicating that the mantle is either dry or only moderately hydrated. We observed converted energy from an intracrustal boundary at around 2 s that disappears near the coast. Further, positive polarity peaks occur that are possibly caused by the down going plate

Land seismic data of the ALPHA amphibious controlled source experiment - Report

Raw-, SEG-Y and other supplementary data of the landside deployment from the amphibious wide-angle seismic experiment ALPHA are presented. The aim of this project was to reveal the crustal and lithospheric structure of the subducting Adriatic plate and the external accretionary wedge in the southern Dinarides. Airgun shots from the RV Meteor were recorded along two profiles across Montenegro and northern Albania

CAYSEIS - magma-starved oceanic crustal accretion and transform margin formation in the Cayman Trough revealed by seismic and seismological data - Cruise No. M115, April 1 - April 28, 2015 - Kingston (Jamaica) - Pointe-à-Pitre (Guadeloupe)

About 57% of the Earth’s outer surface is oceanic crust and new ocean floor is continuously created along the 55,000-60,000 km long mid-ocean ridge (MOR) system. About 25% of MORs spread at an ultra-slow spreading rate of < 20 mm/yr. Most ultra-slow spreading ridges occur in areas of the world that are difficult to reach, like the Gakkel Ridge in the Arctic Ocean and the Southwest Indian Ridge in the Indian Ocean. It has long been recognized that crustal accretion at ultra-slow spreading rates is fundamentally different from crust generated at faster spreading rates. However, due to the remoteness of ultra-slow ridges, the formation of crust at these magma-starved centres is yet not well understood. During the CAYSEIS cruise we surveyed lithospheric formation at ultra-slow spreading rates at the Mid-Cayman spreading centre (MCSC) in the Caribbean Sea, where oceanic crust is formed at a full rate of ~17 mm/yr. To the northeast and southwest, the MCSC is bound by two major transform faults. Using active-source wide-angle seismic imaging and passive local earthquake monitoring we, studied the balance between magmatic accretion and tectonic stretching (and hence oceanic core complex formation) and the relationship between faulting and hydrothermal activity at ultra-slow spreading rates. In addition, we explored transform margin formation at a unique setting, occurring at the southern terminus of the MCSC. In total, six seismic lines surveyed crust formed at the MCSC, two of these profiles also crossed the Swan Island transform fault. The project was a collaboration between German, British and American scientists

Detecting dominant changes in irregularly sampled multivariate water quality data sets

Time series of groundwater and stream water quality often exhibit substantial temporal and spatial variability, whereas typical existing monitoring data sets, e.g. from environmental agencies, are usually characterized by relatively low sampling frequency and irregular sampling in space and/or time. This complicates the differentiation between anthropogenic influence and natural variability as well as the detection of changes in water quality which indicate changes in single drivers. We suggest the new term "dominant changes" for changes in multivariate water quality data which concern (1) multiple variables, (2) multiple sites and (3) long-term patterns and present an exploratory framework for the detection of such dominant changes in data sets with irregular sampling in space and time. Firstly, a non-linear dimension-reduction technique was used to summarize the dominant spatiotemporal dynamics in the multivariate water quality data set in a few components. Those were used to derive hypotheses on the dominant drivers influencing water quality. Secondly, different sampling sites were compared with respect to median component values. Thirdly, time series of the components at single sites were analysed for long-term patterns. We tested the approach with a joint stream water and groundwater data set quality consisting of 1572 samples, each comprising sixteen variables, sampled with a spatially and temporally irregular sampling scheme at 29 sites in northeast Germany from 1998 to 2009. The first four components were interpreted as (1) an agriculturally induced enhancement of the natural background level of solute concentration, (2) a redox sequence from reducing conditions in deep groundwater to post-oxic conditions in shallow groundwater and oxic conditions in stream water, (3) a mixing ratio of deep and shallow groundwater to the streamflow and (4) sporadic events of slurry application in the agricultural practice. Dominant changes were observed for the first two components. The changing intensity of the first component was interpreted as response to the temporal variability of the thickness of the unsaturated zone. A steady increase in the second component at most stream water sites pointed towards progressing depletion of the denitrification capacity of the deep aquifer

Crustal structure of the propagating TAMMAR ridge segment on the Mid-Atlantic Ridge, 21.5°N

Active ridge propagation frequently occurs along spreading ridges and profoundly affects ridge crest segmentation over time. The mechanisms controlling ridge propagation, however, are poorly understood. At the slow spreading Mid-Atlantic Ridge at 21.5°N a seismic refraction and wide-angle reflection profile surveyed the crustal structure along a segment controlled by rapid ridge propagation. Tomographic traveltime inversion of seismic data suggests that the crustal structure along the ridge axis is controlled by melt supply; thus, crust is thickest, 8 km, at the domed segment center and decreases in thickness toward both segment ends. However, thicker crust is formed in the direction of ridge propagation, suggesting that melt is preferentially transferred toward the propagating ridge tip. Further, while seismic layer 2 remains constant along axis, seismic layer 3 shows profound changes in thickness, governing variations in total crustal thickness. This feature supports mantle upwelling at the segment center. Thus, fluid basaltic melt is redistributed easily laterally, while more viscose gabbroic melt tends to crystallize and accrete nearer to the locus of melt supply. The onset of propagation seems to have coincided with the formation of thicker crust, suggesting that propagation initiation might be due to changes in the melt supply. After a rapid initiation a continuous process of propagation was established. The propagation rate seems to be controlled by the amount of magma that reaches the segment ends. The strength of upwelling may govern the evolution of ridge segments and hence ultimately controls the propagation length

Enhanced Mantle Upwelling/Melting Caused Segment Propagation, Oceanic Core Complex Die Off, and the Death of a Transform Fault:The Mid-Atlantic Ridge at 21.5°N

Crustal structure provides the key to understand the interplay of magmatism and tectonism while oceanic crust is constructed at Mid Ocean Ridges (MOR). At slow spreading rates, magmatic processes dominate central areas of MOR segments, whereas segment ends are highly tectonised. The TAMMAR segment at the Mid-Atlantic Ridge (MAR) between 21°25' N and 22° N is a magmatically active segment. At ~4.5 Ma this segment started to propagate south, causing the termination of the transform fault at 21°40' N. This stopped long-lived detachment faulting and caused the migration of the ridge offset to the south. Here, a segment centre with a high magmatic budget has replaced a transform fault region with limited magma supply. We present results from seismic refraction profiles that mapped the crustal structure across the ridge crest of the TAMMAR segment. Seismic data yield crustal structure changes at the segment centre as a function of melt supply. Seismic Layer 3 underwent profound changes in thickness and became rapidly thicker ~5 Ma. This correlates with the observed “Bull's eye” gravimetric anomaly in that region. Our observations support a temporal change from thick lithosphere with oceanic core complex formation and transform faulting to thin lithosphere with focused mantle upwelling and segment growth. Temporal changes in crustal construction are connected to variations in the underlying mantle. We propose there is a link between the neighbouring segments at a larger scale within the asthenosphere, to form a long, highly magmatically active macro segment, here called the TAMMAR-Kane MacroSegment

ADRIA LITHOSPHERE INVESTIGATION ALPHA - Cruise No. M86/3, January 20 - February 04, 2012, Brindisi (Italy) - Dubrovnik (Croatia)

The Adriatic Sea and underlying lithosphere remains the least investigated part of the Mediterranean Sea. To shed light on the plate tectonic setting in this central part of southern Europe, R/V METEOR cruise M86/3 set out to acquire deep penetrating seismic data in the Adriatic Sea. M86/3 formed the core of an amphibious investigation crossing Adria from the Italian Peninsula into Montenegro/Albania. A total of 111 OBS/OBH deployments were successfully carried out, in addition to 47 landstations both in Italy and Montenegro/Albania, which recorded the offshore airgun shots. In the scope of this shoreline-crossing study, the aim is to quantify the shallow geometry, deep boundaries and the architecture of the southern Adriatic crust and lithosphere and to provide insights on a possible decoupling zone between the northern and southern Adriatic domains. Investigating the structure of the Adriatic crust and lithospheric mantle and analyzing the tectonic activity are essential for understanding the mountain-building processes that underlie the neotectonics and earthquake hazard of the Periadriatic region, especially in the vicinity of local decoupling zones