The effect of brick and glass powder on the mechanical properties and porosity of self-compacting mortar

The use of glass and brick powder waste as supplementary cementious material provides an effective approach to produce concrete in order to effectively save resources and solve environmental pollution problems. This study shows the evolution of the preparation of an eco-friendly self-compacting mortar (SCM) with various fineness levels and replacement ratios of crushed glass and crushed calcined brick waste. Cement was replaced by weight, by 8, 12, 16, 20, 24% of glass powder (GP) and 4, 8, 12, 16 and 20% of crushed brick powder (BP), with three specific surface Blaine (SSB) fineness measurements (F1=3300cm2/g,F2=4400 cm2/g and F3=6000 cm2/g) for both wastes. Mini-slump and V-funnel flow time tests of fresh SCM were evaluated. Compressive and flexural strength developments of cured SCMs were determined on 7, 14, 28, 5 6, and 90 days. In addition, porosity of SCM was also evaluated. The results revealed that the (SCM-GP) mix increases workability and reduces superplasticizer dosage, while the (SCMBP) mix reduces workability with a slight increase in superplasticizer. When the GP fineness is higher than the cement fineness, the compression strength with GP contents up to 16% is superior to without the GP, whereas for the BP the strength improvement is up to 8%, while the compression strength decreases when the GP and BP fineness is close or lower than the cement fineness. The porosity diminishes with the increase of the fineness; the 12% of the GPF3 indicated the lowest porousness at 400 days, whereas for SCM-BP the 8BPF3 is the least porous mixture

Concrete Production Using Technogenical, Constructional and Domestic Waste

<p>The article describes investigations carried out by the scientists from various countries in order to improve the physical and mechanical properties of concrete. The grained rubber of tyres, modified sawdust, crushed ceramic bricks, plastic waste and remains of glass are utilised to produce concrete mixtures. The results of research conducted by the scientists show that in the process of producing concrete we can use different types of waste to change natural aggregates and to get concrete with specific properties. Currently, waste handling and utilization are burning ecological problems. Therefore, intensive investigations are carried out in order to utilise technogenical, constructional and domestic waste for concrete mixtures. </p><div class="nav_keywords"><p>Article in Lithuanian</p></div