MICE: The muon ionization cooling experiment. Step I: First measurement of emittance with particle physics detectors

Copyright @ 2011 APSThe Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with time-of-flight and Cherenkov detectors to ensure a pure muon beam. The emittance of the incoming beam will be measured in the upstream magnetic spectrometer with a scintillating fiber tracker. A cooling cell will then follow, alternating energy loss in Liquid Hydrogen (LH2) absorbers to RF cavity acceleration. A second spectrometer, identical to the first, and a second muon identification system will measure the outgoing emittance. In the 2010 run at RAL the muon beamline and most detectors were fully commissioned and a first measurement of the emittance of the muon beam with particle physics (time-of-flight) detectors was performed. The analysis of these data was recently completed and is discussed in this paper. Future steps for MICE, where beam emittance and emittance reduction (cooling) are to be measured with greater accuracy, are also presented.This work was supported by NSF grant PHY-0842798

Electron-muon ranger: performance in the MICE muon beam

The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100–280 MeV/c

Electron-muon ranger: performance in the MICE muon beam

The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100–280 MeV/c

Enhanced Eyelashes: Prescription and Over-the-Counter Options

Women have long strived to possess long, thick, and dark eyelashes. Prominent eyes and eyelashes are often considered a sign of beauty and can be associated with increased levels of attractiveness, confidence, and well-being. Numerous options may improve the appearance of eyelashes. Mascara aims to temporarily darken, lengthen, and thicken eyelashes using a combination of waxes, pigments, and resins. Artificial eyelashes can be adhered either to the dermal margin or to individual eyelashes. Individuals may even use eyelash transplantations to improve the appearance of their eyelashes. The unique properties of eyelashes (e.g., relatively long telogen and short anagen phases compared with scalp hairs, slow rate of growth, and a lack of influence by androgens) may allow for specific aesthetic interventions to improve the appearance of natural eyelashes. Some over-the-counter (OTC) products may contain prostaglandin analogs that can affect eyelash growth, but neither the safety nor efficacy of these OTC cosmetics has been fully studied. Originally indicated for the reduction of intraocular pressure, the synthetic prostaglandin analog bimatoprost was recently approved for the treatment of hypotrichosis of the eyelashes. In a double-blinded, randomized, vehicle-controlled trial, bimatoprost safely and effectively grew natural eyelashes, making them longer, thicker, and darker. Bimatoprost was generally safe and well tolerated and appears to provide an additional option for individuals looking to improve the appearance of their eyelashes

First demonstration of ionization cooling by the muon ionization cooling experiment

High-brightness muon beams of energy comparable to those produced by state-of-the-art electron, proton and ion accelerators have yet to be realised. Such beams have the potential to carry the search for new phenomena in lepton-antilepton collisions to extremely high energy and also to provide uniquely well-characterised neutrino beams. A muon beam may be created through the decay of pions produced in the interaction of a proton beam with a target. To produce a high-brightness beam from such a source requires that the phase space volume occupied by the muons be reduced (cooled). Ionization cooling is the novel technique by which it is proposed to cool the beam. The Muon Ionization Cooling Experiment collaboration has constructed a section of an ionization cooling cell and used it to provide the first demonstration of ionization cooling. We present these ground-breaking measurements

Transverse emittance reduction in muon beams by ionization cooling

Data availability The unprocessed and reconstructed data that support the findings of this study are publicly available on the GridPP computing grid53,54. Source data are provided with this paper. Publications using MICE data must contain the following statement: ‘We gratefully acknowledge the MICE collaboration for allowing us access to their data. Third-party results are not endorsed by the MICE collaboration’.Code availability: The MAUS software that was used to reconstruct and analyse the MICE data is available at ref. 55. The analysis presented here used MAUS version 3.3.2.Change history: 30 July 2024A Correction to this paper has been published: https://doi.org/10.1038/s41567-024-02616-8 .A preprint version of the article is available at arXiv:2310.05669v2 [physics.acc-ph], https://arxiv.org/abs/2310.05669 [v2] Fri, 13 Oct 2023 10:40:14 UTC (963 KB). Report number: STFC-P-2023-004. It has not been certified by peer review.Accelerated muon beams have been considered for the next-generation studies of high-energy lepton–antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the production mechanism of muons through the decay of pions. The phase-space volume of the muon beam can be decreased through ionization cooling. Here we show that ionization cooling leads to a reduction in the transverse emittance of muon beams that traverse lithium hydride or liquid hydrogen absorbers in the Muon Ionization Cooling Experiment. Our results represent a substantial advance towards the realization of muon-based facilities that could operate at the energy and intensity frontiers.The work described here was made possible by grants from the Science and Technology Facilities Council (UK); the Department of Energy and the National Science Foundation (USA); the Istituto Nazionale di Fisica Nucleare (Italy); the European Union under the European Union’s Framework Programme 7 (AIDA project, grant agreement no. 262025; TIARA project, grant agreement no. 261905; and EuCARD); the Japan Society for the Promotion of Science; the National Research Foundation of Korea (no. NRF2016R1A5A1013277); the Ministry of Education, Science and Technological Development of the Republic of Serbia; the Institute of High Energy Physics/Chinese Academy of Sciences fund for collaboration between the People’s Republic of China and the USA; and the Swiss National Science Foundation in the framework of the SCOPES programme

Lattice design and expected performance of the Muon Ionization Cooling Experiment demonstration of ionization cooling

Muon beams of low emittance provide the basis for the intense, well-characterized neutrino beams necessary to elucidate the physics of flavor at a neutrino factory and to provide lepton-antilepton collisions at energies of up to several TeV at a muon collider. The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at such facilities. In an ionization-cooling channel, the muon beam passes through a material in which it loses energy. The energy lost is then replaced using rf cavities. The combined effect of energy loss and reacceleration is to reduce the transverse emittance of the beam (transverse cooling). A major revision of the scope of the project was carried out over the summer of 2014. The revised experiment can deliver a demonstration of ionization cooling. The design of the cooling demonstration experiment will be described together with its predicted cooling performance.The work described here was made possible by grants from the Science and Technology Facilities Council (UK), the Department of Energy and National Science Foundation (USA), the Instituto Nazionale di Fisica Nucleare (Italy), the Bulgarian Academy of Sciences, the Chinese Academy of Sciences, the Dutch National Science Foundation, the Ministry of Education, Science and Technological Development of the Republic of Serbia, the European Community under the European Commission Framework Programme 7 (AIDA project, Grant Agreement No. 262025, TIARA project, Grant Agreement No. 261905, and EuCARD), the Japan Society for the Promotion of Science and the Swiss National Science Foundation in the framework of the SCOPES programme. We gratefully acknowledge all sources of support. We are grateful to the support given to us by the staff of the STFC Rutherford Appleton and Daresbury Laboratories

Rapid patterning of single-wall carbon nanotubes by interlayer lithography.

High resolution patterning of single-wall carbon nanotubes is achieved using interlayer lithography. Minimum feature sizes of 6 and 0.7 μm are demonstrated on glass and silicon, using the negative photoresist SU-8 and the positive photoresist AZ7220, respectively. Films patterned using SU-8 have a good balance of transparency and sheet-resistance, and are shown to be effective electrodes for organic solar cells. Copyright © 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim

Validation of Actigraphy Sleep Metrics in Children Aged 8 to 16 Years: Considerations for Device Type, Placement and Algorithms

Background: Actigraphy is often used to measure sleep in pediatric populations, despite little confirmatory evidence of the accuracy of existing sleep/wake algorithms. The aim of this study was to determine the performance of 11 sleep algorithms in relation to overnight polysomnography in children and adolescents. Methods: One hundred thirty-seven participants aged 8–16 years wore two Actigraph wGT3X-BT (wrist, waist) and three Axivity AX3 (wrist, back, thigh) accelerometers over 24-h. Gold standard measures of sleep were obtained using polysomnography (PSG; Embletta MPRPG, ST + Proxy and TX Proxy) in the home environment, overnight. Epoch by epoch comparisons of the Sadeh (two algorithms), Cole-Kripke (three algorithms), Tudor-Locke (four algorithms), Count-Scaled (CS), and HDCZA algorithms were undertaken. Mean differences from PSG values were calculated for various sleep outcomes. Results: Overall, sensitivities were high (mean ± SD: 91.8%, ± 5.6%) and specificities moderate (63.8% ± 13.8%), with the HDCZA algorithm performing the best overall in terms of specificity (87.5% ± 1.3%) and accuracy (86.4% ± 0.9%). Sleep outcome measures were more accurately measured by devices worn at the wrist than the hip, thigh or lower back, with the exception of sleep efficiency where the reverse was true. The CS algorithm provided consistently accurate measures of sleep onset: the mean (95%CI) difference at the wrist with Axivity was 2 min (-6; -14,) and the offset was 10 min (5, -19). Several algorithms provided accurate measures of sleep quantity at the wrist, showing differences with PSG of just 1–18 min a night for sleep period time and 5–22 min for total sleep time. Accuracy was generally higher for sleep efficiency than for frequency of night wakings or wake after sleep onset. The CS algorithm was more accurate at assessing sleep period time, with narrower 95% limits of agreement compared to the HDCZA (CS:-165 to 172 min; HDCZA: -212 to 250 min). Conclusion: Although the performance of existing count-based sleep algorithms varies markedly, wrist-worn devices provide more accurate measures of most sleep measures compared to other sites. Overall, the HDZCA algorithm showed the greatest accuracy, although the most appropriate algorithm depends on the sleep measure of focus