Alpha-induced cross sections of 106Cd for the astrophysical p-process

The 106Cd(alpha,gamma)110Sn reaction cross section has been measured in the energy range of the Gamow window for the astrophysical p-process scenario. The cross sections for 106Cd(alpha,n)109Sn and for 106Cd(alpha,p)109In below the (alpha,n) threshold have also been determined. The results are compared with predictions of the statistical model code NON-SMOKER using different input parameters. The comparison shows that a discrepancy for 106Cd(alpha,gamma)110Sn when using the standard optical potentials can be removed with a different alpha+106Cd potential. Some astrophysical implications are discussed.Comment: 10 pages, 9 figures, accepted for publication in Phys. Rev

The effect of zinc application methods on seed cotton yield, lint and seed quality of cotton (Gossypium hirsutum L.) in east Mediterranean region of Turkey

The effect of different zinc application methods on seed cotton yield, yield components, lint and seed quality of cotton was investigated under east Mediterranean region conditions (Kahramanmaras, Turkey) in 2008. Experimental design was split plots with three replications. The cotton varieties: Agdas-3, Agdas-17 and Maras-92 (Gossypium hirsutum L.) were plant materials. Zinc application treatments were seed, soil surface, foliar application and untreated control. A commercial preparation of chelated zinc (EDTA Zn-17 %) was used as zinc fertilizer. It was determined that zinc application methods did not affect yield and yield components except plant height. While zinc application methods had no effect on lint quality traits except spinning consistency index (SCI), elongation and yellowness (+b), which are the best values, were taken from the soil surface and foliar application of zinc and control for spinning consistency index, and from the foliar application of zinc for yellowness. On the other hand, zinc application methods did not affect raw oil and protein ratio of cotton seeds, as well as the zinc content of cotton seeds and leaves. When the pH, organic matter, lime content and soil texture were taken into consideration, decreasing of pH value and lime content of soil and increasing of organic matter together with zinc fertilization in the experimental field were suggested.Key words: Cotton, zinc (Zn) fertilizer, application methods, seed cotton yield, lint quality, seed quality

Effect of heat on laterised concrete

This study presents the results of investigation of the effects of temperature variation on the compressive strength of laterised concrete. Cube specimens were cast, cured in water at ambient laboratory temperature and subjected to different temperature regimes before testing. A concrete mix ratio of 2:3:6 (cement: laterite/sand: granite) with water/cement ratio of 0.65 was adopted for this investigation. The laterite content in the fine aggregate was varied from 0 to 100% at 25% interval. Specimens cured for 7 and 28 days were subjected to uniaxial compressive loading tests at room and elevated temperatures of 250, 500 and 750oC. The results show that normal concrete cannot withstand appreciable load above 250oC while laterised concrete with 25% laterite in the fine aggregate is able to resist higher load with increase in age and at temperature up to 500oC. It is also observed that there is no appreciable increase in strength at higher temperatures. The peak compressive strength value of 30.44 N/mm2 is recorded for the mix with 25% laterite-75% sand at 500oC. This is an indication that the strength of laterised concrete is generally sufficient for use at elevated temperature not exceeding 500oC

Effect of heat treatment on in situ rumen degradability and in vitro gas production of full-fat soyabeans and soyabean meal

The objective of this study was to determine the effect of the heat treatment of full-fat soyabean (FFSB) and solvent extracted soyabean meal (SBM) on the in situ dry matter (DM) and protein degradability, and in vitro gas production kinetics of the protein sources. Ruminal disappearance of DM and crude protein (CP), and in vitro gas production were determined after 0, 4, 8, 16, 24, 48 and 72 h incubation using the in situ ruminal degradation and in vitro gas production techniques, respectively. In situ DM and CP disappearances were fitted to the exponential equation p = a + b (1-e-ct), where a is the rapid degradable fraction and b is the slow degradable fraction. In vitro gas production data were fitted to the equation, y = A {1 – exp [- b (t-T) – c (√t - √T)]}. Where b and c are the initial gas production rate constant (h-1) and later gas production rate constant (h-1/2), respectively. The two protein sources were heat treated both with steam pressure in an autoclave at 120 °C and in an oven at 150 °C for 20 min. Heat treatment had a significant effect on effective DM degradability (EDMD), effective CP degradability (ECPD) and in vitro gas production. Although the heat treatments reduced the EDMD, ECPD and the amount of gas produced, the results were inconsistent between protein sources. The heat treatments applied in the autoclave and the oven reduced the ECPD0.02 of FFSB by 12.5% and 10.9%, respectively. On the other hand, heat treatment applied through the autoclave decreased the ECPD0.02 of SBM by 13.9%, but by 18.7% when heat was applied through the oven. Heat treatment of SBM using the oven seemed to be more effective than using autoclaving. Heat treatments in the autoclave and oven reduced the total gas production from FFSB by 7.25 and 7.32%, respectively, and from SBM by 12.69 and 7.91%, respectively. It was concluded that heat treatment is an effective method of altering the rumen degradation characteristics of DM and CP in SBM and FFSB. Both methods could be used to increase the proportion of the rumen non-degradable protein fraction in protein sources which would then reach the small intestines unaffected by ruminal fermentation. Keywords: Full-fat soyabean; soyabean meal; heat treatment; in situ protein degradation; in vitro gas production South African Journal of Animal Sciences Vol. 35 (3) 2005: pp.186-19

Measurement of the t(t)over-bar production cross section in the dilepton channel in pp collisions at √s=8 TeV

The top-antitop quark (t (t) over bar) production cross section is measured in proton-proton collisions at root s = 8 TeV with the CMS experiment at the LHC, using a data sample corresponding to an integrated luminosity of 5.3 fb(-1). The measurement is performed by analysing events with a pair of electrons or muons, or one electron and one muon, and at least two jets, one of which is identified as originating from hadronisation of a bottom quark. The measured cross section is 239 +/- 2 (stat.) +/- 11 (syst.) +/- 6 (lum.) pb, for an assumed top-quark mass of 172.5 GeV, in agreement with the prediction of the standard model

Collections and Collection Development Exercise in Libraries: A Perspective in View

This paper examines what collection is all about and the concept collection development exercise in libraries stating the methods used in actualizing the collection development which are community need assessment, selection, and placing order, receiving/checking. This study also outlines some procedures for acquiring information resources in the collection development department which are: purchase, exchange, legal deposit, gift/donation, subscription, photocopies, inter-library loan and weeding. It also states some problems associated with the collection development department as: relegation of the library to the background; poor numeration of the library staff; glory driven consciousness of the library staff; lack of required information resources and lack of financial resources. This paper pointed out some relevant impact that collection development department can accrue to any of the libraries practicing it. The study thus concluded by proffering some recommendations that will help to make the library and the collection development department vibrant

Autoimmune gastrointestinal complications in patients with Systemic Lupus Erythematosus: case series and literature review

The association of systemic lupus erythematosus (SLE) with gastrointestinal autoimmune diseases is rare, but has been described in the literature, mostly as case reports. However, some of these diseases may be very severe, thus a correct and early diagnosis with appropriate management are fundamental. We have analysed our data from the SLE patient cohort at University College Hospital London, established in 1978, identifying those patients with an associated autoimmune gastrointestinal disease. We have also undertaken a review of the literature describing the major autoimmune gastrointestinal pathologies which may be coincident with SLE, focusing on the incidence, clinical and laboratory (particularly antibody) findings, common aetiopathogenesis and complications

Global Existence of Bi-Hamiltonian Structures on Orientable Three-Dimensional Manifolds

In this work, we show that an autonomous dynamical system defined by a nonvanishing vector field on an orientable three-dimensional manifold is globally bi-Hamiltonian if and only if the first Chern class of the normal bundle of the given vector field vanishes. Furthermore, the bi-Hamiltonian structure is globally compatible if and only if the Bott class of the complex codimension one foliation defined by the given vector field vanishes

Mechanisms and models of somatic cell reprogramming

Whitehead Institute for Biomedical Research (Jerome and Florence Brill Graduate Student Fellowship)National Institutes of Health (U.S.) (US NIH grant RO1-CA087869)National Institutes of Health (U.S.) (US NIH grant R37-CA084198)National Science Foundation (U.S.) (NSF Graduate Research Fellowship)National Institutes of Health (U.S.) ((NIH) Kirschstein National Research Service Award,1 F32 GM099153-01A1)Vertex Pharmaceuticals Incorporated (Vertex Scholar

Energy Response and Longitudinal Shower Profiles Measured in CMS HCAL and Comparison With Geant4

The response of the CMS combined electromagnetic and hadron calorimeter to beams of pions with momenta in the range 5-300 GeV/c has been measured in the H2 test beam at CERN. The raw response with the electromagnetic compartment calibrated to electrons and the hadron compartment calibrated to 300 GeV pions may be represented by sigma = (1.2) sqrt{E} oplus (0.095) E. The fraction of energy visible in the calorimeter ranges from 0.72 at 5 GeV to 0.95 at 300 GeV, indicating a substantial nonlinearity. The intrinsic electron to hadron ratios are fit as a function of energy and found to be in the range 1.3-2.7 for the electromagnetic compartment and 1.4-1.8 for the hadronic compartment. The fits are used to correct the non-linearity of the e pi response to 5% over the entire measured range resulting in a substantially improved resolution at low energy. Longitudinal shower profile have been measured in detail and compared to Geant4 models, LHEP-3.7 and QGSP-2.8. At energies below 30 GeV, the data, LHEP and QGSP are in agreement. Above 30 GeV, LHEP gives a more accurate simulation of the longitudinal shower profile