Kinetics of alkoxysilanes hydrolysis: An empirical approach

Alkoxysilanes and organoalkoxysilanes are primary materials in several industries, e.g. coating, anti-corrosion treatment, fabrication of stationary phase for chromatography, and coupling agents. The hydrolytic polycondensation reactions and final product can be controlled by adjusting the hydrolysis reaction, which was investigated under a variety of conditions, such as different alkoxysilanes, solvents, and catalysts by using gas chromatography. The hydrolysis rate of alkoxysilanes shows a dependence on the alkoxysilane structure (especially the organic attachments), solvent properties, and the catalyst dissociation constant and solubility. Some of the alkoxysilanes exhibit intramolecular catalysis. Hydrogen bonding plays an important role in the enhancement of the hydrolysis reaction, as well as the dipole moment of the alkoxysilanes, especially in acetonitrile. There is a relationship between the experimentally calculated polarity by the Taft equation and the reactivity, but it shows different responses depending on the solvent. It was found that negative and positive charges are respectively accumulated in the transition state in alkaline and acidic media. The reaction mechanisms are somewhat different from those previously suggested. Finally, it was found that enthalpy–entropy compensation (EEC) effect and isokinetic relationships (IKR) are exhibited during the hydrolysis of CTES in different solvents and catalysts; therefore, the reaction has a linear free energy relationship (LFER).The publication of this article was funded by the Qatar National Library.Scopu

Eco-structured biosorptive removal of basic fuchsin using pistachio nutshells: A definitive screening design-based approach

Biosorptive removal of basic fuchsin (BF) from wastewater samples was achieved using the recycled agro-wastes of pistachio nut shells (PNS). Seven adsorbents were developed; raw shells (RPNS) and the thermally activated biomasses at six different temperatures (250–500 °C). Two measures were implemented to assess the performance of utilized adsorbents; %removal (%R) and adsorption capacity (qe). RPNS proved to be the best among the tested adsorbents. A smart approach, definitive-screening design (DSD) was operated to test the impact of independent variables on the adsorption capacity of RPNS. pH, adsorbent dose (AD), dye concentration (DC), and stirring time (ST), were the tested variables. Analysis of variance (ANOVA), control, and quality charts helped establishing regression model. Characterization was performed using Fourier- transform infrared (FT-IR)/Raman spectroscopies together with thermogravimetric analysis (TGA) and scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDX) analyses. The surface area and other textural properties were determined using the Brunauer Emmett-Teller (BET) analysis. Removal of 99.71% of BF with an adsorption capacity of 118.2 mg/g could be achieved using a factorial blend of pH 12, 100 mg/50 mL of RPNS, and 250 ppm BF for 20 min. Equilibrium studies reveal that the adsorption is physisorption with adsorption energy of 7.45 kJ/mol as indicated by Dubinin-Radushkevich (DR) and Langmuir isotherms. Moreover, adsorption follows pseudo-second-order kinetics with respect to BF and is controlled by the adsorption rate.This work was made possible by Qatar University Internal Student Grant [QUST-2-CAS-2019-18] from Qatar University. The statements made herein are solely the responsibility of the authors. The publication of this article was funded by the Qatar National Library.Scopu

Bio-Waste Aloe vera Leaves as an efficient adsorbent for Titan Yellow from Wastewater: Structuring of a novel adsorbent using Plackett-Burman factorial design

Titan yellow (TY), a triazene azo dye, was removed from contaminated wastewater samples using a green adsorbent recycled from Aloe vera leaves (AV) waste. Two adsorbents were developed-air-dried Aloe vera (ADAV) and thermally treated Aloe vera (TTAV). Adsorption efficacy of both adsorbents was assessed in terms of percent removal (%R) of TY and adsorption capacity (qe). ADAV had a better performance compared to TTAV. Plackett-Burman design (PBD) was exploited to establish the experimental pattern of the study. Four variables were studied: pH, adsorbent dose (AD), dye concentration (DC), and stirring time (ST). Analysis of variance (ANOVA) at 95.0 confidence interval (CI), control, and quality charts helped establish regression model(s). Characterization of both adsorbents was performed using FT-IR/Raman spectroscopy together with TGA/dTGA and SEM/energy dispersive X-ray spectroscopy (EDX) analyses. Textural properties were determined using nitrogen adsorption isotherms at 77 K. Results showed that the surface areas of ADAV and TTAV300 were 3.940 and 7.076 m2/g, respectively. Raman analysis showed that the TTAV had clear Dand G-bands. Equilibrium studies revealed that data were well fitted to Freundlich isotherm with a maximum adsorption capacity of 55.25 mg/g using Langmuir equation, and the adsorption was physisorption. Adsorption followed a pseudo-second order that occurred in two steps-diffusion and then adsorption. - 2019 by the authors.The project members would like to extend their special thanks to the Central Lab Unit (CLU) at the Qatar University. This work was made possible by Qatar University Internal Student Grant [QUST-2-CAS-2019-18] from Qatar University. The statements made herein are solely the responsibility of the authors. The publication of this article was funded by the Qatar National LibraryScopu

Recycling of Date Pits Into a Green Adsorbent for Removal of Heavy Metals: A Fractional Factorial Design-Based Approach

Date pits (DPs) have been recycled into a low-cost adsorbent for removing of selected heavy metals (HMs) from artificially contaminated aqueous solutions. Adsorption of targeted HMs, both by raw date pits (RDP) and burnt date pits (BDP) was tested. Results showed that BDP is more efficient as an adsorbent and mostly adsorbing Cu(II). A novel approach; fractional factorial design (2k−p – FrFD) was used to build the experimental pattern of this study. The effects of four factors on the maximum percentage (%) of removal (Y) were considered; pH, adsorbent dose (AD), heavy metal concentration (HMC), and contact time (CT). Statistically significant variables were detected using Pareto chart of standardized effects, normal and half-normal plots together with analysis of variance (ANOVA) at 95.0 confidence intervals (CI). Optimizing (maximizing) the percentage (%) removal of Cu(II) by BDP, was performed using optimization plots. Results showed that the factors: pH and adsorbent dose (AD) affect the response positively. Scanning electron microscopy (SEM) was used to study the surface morphology of both adsorbents while fourier-transform infrared spectroscopy (FTIR) was employed to get an idea on the functional groups on the surface and hence the adsorption mechanism. Raman spectroscopy was used to characterize the prepared adsorbents before and after adsorption of Cu(II). Equilibrium studies show that the adsorption behavior differs according to the equilibrium concentration. In general, it follows Langmuir isotherm up to 155 ppm, then Freundlich isotherm. Free energy of adsorption (ΔGad) is −28.07 kJ/mole, when equilibrium concentration is below 155 ppm, so the adsorption process is spontaneous, while (ΔGad) equals +17.89 kJ/mole above 155 ppm, implying that the process is non-spontaneous. Furthermore, the adsorption process is a mixture of physisorption and chemisorption processes, which could be endothermic or exothermic reactions. The adsorption kinetics were described using a second order model.Funding. This work was made possible by UREP award [UREP 20-116-1-020] from the Qatar National Research Fund (a member of The Qatar Foundation). The statements made herein are solely the responsibility of the authors

Multiple Crimean-Congo Hemorrhagic Fever Virus Strains Are Associated with Disease Outbreaks in Sudan, 2008–2009

The tick-borne virus which causes the disease Crimean-Congo hemorrhagic fever (CCHF) is known to be widely distributed throughout much of Africa, Southern Europe, the Middle East, Central Asia, and Southern Russia. Humans contract the virus from contact with infected people, infected animals (which do not show symptoms), and from the bite of infected ticks. CCHF was recently recognized in the Sudan when several hospital staff and patients died from the disease in a rural hospital. The genetic analysis of viruses associated with the 2008 and 2009 outbreaks shows that several CCHF viral strains currently circulate and cause human outbreaks in the Sudan, highlighting CCHF virus as an emerging pathogen. The Sudanese strains are similar to others circulating in Africa, indicating movement of virus over large distances with introduction and disease outbreaks in rural areas possible. Understanding the epidemiology of zoonotic diseases such as CCHF is especially important in the Sudan given the large numbers of livestock in the country, and their importance to the economy and rural communities. It is imperative that hospital staff consider CCHF as a possible disease agent, since they are at a high risk of contracting the disease, especially in hospitals with limited medical supplies

PREVALENCE AND RISK FACTORS OF SCHISTOSOMIASIS AMONG HAUSA COMMUNITIES IN KANO STATE, NIGERIA

SUMMARY Schistosomiasis remains one of the most prevalent neglected tropical diseases especially in Nigeria which has the greatest number of infected people worldwide. A cross-sectional study was conducted among 551 participants from Kano State, North Central Nigeria. Fecal samples were examined for the presence of Schistosoma mansoni eggs using the formalin-ether sedimentation method while the urine samples were examined using the filtration technique for the presence of S. haematobium eggs. Demographic, socioeconomic and environmental information was collected using a pre-validated questionnaire. The overall prevalence of schistosomiasis was 17.8%, with 8.9% and 8.3% infected with S. mansoni and S. haematobium, respectively and 0.5% presenting co-infection with both species. The multiple logistic regression analysis revealed that age < 18 years (OR = 2.13; 95% CI; 1.34- 3.41), presence of infected family members (OR = 3.98; 95% CI; 2.13-7.46), and history of infection (OR = 2.87; 95% CI; 1.87- 4.56) were the significant risk factors associated with schistosomiasis in these communities. In conclusion, this study revealed that schistosomiasis is still prevalent among Hausa communities in Nigeria. Mass drug administration, health education and community mobilization are imperative strategies to significantly reduce the prevalence and morbidity of schistosomiasis in these communities