Natural coagulates for wastewater treatment; a review for application and mechanism

The increase of water demand and wastewater generation is among the global concerns in the world. The less effective management of water sources leads to serious consequences, the direct disposal of untreated wastewater is associated with the environmental pollution, elimination of aquatic life and the spread of deadly epidemics. The flocculation process is one of the most important stages in water and wastewater treatment plants, wherein this phase the plankton, colloidal particles, and pollutants are precipitated and removed. Two major types of coagulants are used in the flocculation process included the chemical and natural coagulants. Many studies have been performed to optimize the flocculation process while most of these studies have confirmed the hazardous effects of chemical coagulants utilization on the ecosystem. This chapter reviews a summary of the coagulation/flocculation processes using natural coagulants as well as reviews one of the most effective natural methods of water and wastewater treatment

Potential applications of nanotechnology in thermochemical conversion of microalgal biomass

The rapid decrease in fossil reserves has significantly increased the demand of renewable and sustainable energy fuel resources. Fluctuating fuel prices and significant greenhouse gas (GHG) emission levels have been key impediments associated with the production and utilization of nonrenewable fossil fuels. This has resulted in escalating interests to develop new and improve inexpensive carbon neutral energy technologies to meet future demands. Various process options to produce a variety of biofuels including biodiesel, bioethanol, biohydrogen, bio-oil, and biogas have been explored as an alternative to fossil fuels. The renewable, biodegradable, and nontoxic nature of biofuels make them appealing as alternative fuels. Biofuels can be produced from various renewable resources. Among these renewable resources, algae appear to be promising in delivering sustainable energy options. Algae have a high carbon dioxide (CO2) capturing efficiency, rapid growth rate, high biomass productivity, and the ability to grow in non-potable water. For algal biomass, the two main conversion pathways used to produce biofuel include biochemical and thermochemical conversions. Algal biofuel production is, however, challenged with process scalability for high conversion rates and high energy demands for biomass harvesting. This affects the viable achievement of industrial-scale bioprocess conversion under optimum economy. Although algal biofuels have the potential to provide a sustainable fuel for future, active research aimed at improving upstream and downstream technologies is critical. New technologies and improved systems focused on photobioreactor design, cultivation optimization, culture dewatering, and biofuel production are required to minimize the drawbacks associated with existing methods. Nanotechnology has the potential to address some of the upstream and downstream challenges associated with the development of algal biofuels. It can be applied to improve system design, cultivation, dewatering, biomass characterization, and biofuel conversion. This chapter discusses thermochemical conversion of microalgal biomass with recent advances in the application of nanotechnology to enhance the development of biofuels from algae. Nanotechnology has proven to improve the performance of existing technologies used in thermochemical treatment and conversion of biomass. The different bioprocess aspects, such as reactor design and operation, analytical techniques, and experimental validation of kinetic studies, to provide insights into the application of nanotechnology for enhanced algal biofuel production are addressed

A change in the transportation needs today, a better future for tomorrow – climate change review

No sooner than later, the world will be living hell as a result of the transportation effects on our climate now escalating. The pressure is now growing towards their resultant effects to be totally eradicated in order to save our planet otherwise, the stabilisation of these effects; global warming, greenhouse gas (GHG) emission and degradation will need to be sought after. The world all over is at it now in an effort to restore our climate, to save it from the effects of these catastrophes/disasters. On the proposition of the Kyoto Protocol in1997, the main focus was to decrease greenhouse emissions of mainly six gases – Carbon dioxide, methane, nitrous oxide, sulphur hexafluoride, Hydro fluorocarbons (HFCs) and Per fluorinated Compounds (PFCs). And transport alone, accounts for over 26% of global CO2 and has been regarded as one of the few industrial sectors wherein emissions are still on the increase, on this basis, researchers and policy makers are all at it to tackle the menace of climate changes through provision of sustainable transport. This paper focuses on the new and developed technologies like the renewable energy source [RES], which will be an alternative to transport fuels to avoid the dependence on petroleum which after effects are damaging to the world climate, and may probably not be there forever to continue serving the world ever increasing population. While the long term solutions are being sought, these alternatives will make do for now

Biomethanation potential of biological and other wastes

Anaerobic technology has been traditionally applied for the treatment of carbon rich wastewater and organic residues. Anaerobic processes can be fully integrated in the biobased economy concept for resource recovery. After a brief introduction about applications of anaerobic processes to industrial wastewater treatment, agriculture feedstock and organic fraction of municipal solid waste, the position of anaerobic processes in biorefinery concepts is presented. Integration of anaerobic digestion with these processes can help in the maximisation of the economic value of the biomass used, while reducing the waste streams produced and mitigating greenhouse gases emissions. Besides the integration of biogas in the existing full-scale bioethanol and biodiesel production processes, the potential applications of biogas in the second generation lignocellulosic, algae and syngas-based biorefinery platforms are discussed.(undefined

Generation of sub-20-fs pulses from a graphene mode-locked laser

We demonstrate, what is to our knowledge, the shortest pulses directly generated to date from a solid-state laser, mode locked with a graphene saturable absorber (GSA). In the experiments, a low-threshold diode-pumped Cr3+:LiSAF laser was used near 850 nm. At a pump power of 275 mW provided by two pump diodes, the Cr3+:LiSAF laser produced nearly transform-limited, 19-fs pulses with an average output power of 8.5 mW. The repetition rate was around 107 MHz, corresponding to a pulse energy and peak power of 79 pJ and 4.2 kW, respectively. Once mode locking was initiated with the GSA, stable, uninterrupted femtosecond pulse generation could be obtained. In addition, the femtosecond output of the laser could be tuned from 836 nm to 897 nm with pulse durations in the range of 80-190 fs. We further performed detailed mode locking initiation tests across the full cavity stability range of the laser to verify that pulse generation was indeed started by the GSA and not by Kerr lens mode locking. � 2017 Optical Society of America

Graphene mode-locked Cr:LiSAF laser at 850 nm

We report, for the first time to our knowledge, a mode-locked femtosecond Cr:LiSAF laser initiated with a high-quality monolayer graphene saturable absorber (GSA), synthesized by chemical-vapor deposition. The tight-focusing resonator architecture made it possible to operate the Cr:LiSAF laser with only two 135 mW, 660 nm low-cost single-mode diode lasers. At a pump power of 270 mW, the laser produced nearly transform-limited 68 fs pulses with an average power of 11.5 mW at 850 nm. The repetition rate was around 132 MHz, corresponding to a pulse energy and peak power of 86 pJ and 1.26 kW, respectively. Once mode locking was initiated with the GSA, stable, uninterrupted femtosecond pulse generation could be sustained for hours. The saturation fluence and the modulation depth of the GSA were further determined to be 28 μJ/cm2 and 0.62%, respectively. 2015 Optical Society of America

Mitochondrial Superoxide Dismutase Overexpression and Low Oxygen Conditioning Hormesis Improve the Performance of Irradiated Sterile Males

The Sterile Insect Technique (SIT) is a successful autocidal control method that uses ionizing radiation to sterilize insects. However, irradiation in normal atmospheric conditions can be damaging for males, because irradiation generates substantial biological oxidative stress that, combined with domestication and mass-rearing conditions, may reduce sterile male sexual competitiveness and quality. In this study, biological oxidative stress and antioxidant capacity were experimentally manipulated in Anastrepha suspensa using a combination of low-oxygen conditions and transgenic overexpression of mitochondrial superoxide dismutase (SOD2) to evaluate their role in the sexual behavior and quality of irradiated males. Our results showed that SOD2 overexpression enhances irradiated insect quality and improves male competitiveness in leks. However, the improvements in mating performance were modest, as normoxia-irradiated SOD2 males exhibited only a 22% improvement in mating success compared to normoxia-irradiated wild type males. Additionally, SOD2 overexpression did not synergistically improve the mating success of males irradiated in either hypoxia or severe hypoxia. Short-term hypoxic and severe-hypoxic conditioning hormesis, per se, increased antioxidant capacity and enhanced sexual competitiveness of irradiated males relative to non-irradiated males in leks. Our study provides valuable new information that antioxidant enzymes, particularly SOD2, have potential to improve the quality and lekking performance of sterile males used in SIT programs

Potential vegetable sources for biodiesel production:Cashew, coconut and cotton

This work presents a study on crude oil and biodiesel obtained from the seeds of the tropical plants Anacardium occidentale L (cashew), Cocos nucifera (coconut palm) and Gossypium hirsutum (upland cotton). The following crude oil and biodiesel physical-chemical properties were determined: acid number, iodine value, copper corrosivity, density and viscosity at different temperatures. Also, the chemical composition of the fatty acid methyl esters was measured using gas chromatography and a comparison was made with biodiesel from other sources reported in the literature. The analysis pointed out that cashew, coconut palm and upland cotton are potential sources for biodiesel production. Among the biodiesel types tested, cashew showed the highest oxidation stability

Reduced exposure to calcineurin inhibitors in renal transplantation

Background: immunosuppressive regimens with the fewest possible toxic effects are desirable for transplant recipients. This study evaluated the efficacy and relative toxic effects of four immunosuppressive regimens. Methods: we randomly assigned 1645 renal-transplant recipients to receive standard-dose cyclosporine, mycophenolate mofetil, and corticosteroids, or daclizumab induction, mycophenolate mofetil, and corticosteroids in combination with low-dose cyclosporine, low-dose tacrolimus, or low-dose sirolimus. The primary end point was the estimated glomerular filtration rate (GFR), as calculated by the Cockcroft-Gault formula, 12 months after transplantation. Secondary end points included acute rejection and allograft survival. Results: the mean calculated GFR was higher in patients receiving low-dose tacrolimus (65.4 ml per minute) than in the other three groups (range, 56.7 to 59.4 ml per minute). The rate of biopsy-proven acute rejection was lower in patients receiving low-dose tacrolimus (12.3%) than in those receiving standard-dose cyclosporine (25.8%), low-dose cyclosporine (24.0%), or low-dose sirolimus (37.2%). Allograft survival differed significantly among the four groups (P=0.02) and was highest in the low-dose tacrolimus group (94.2%), followed by the low-dose cyclosporine group (93.1%), the standard-dose cyclosporine group (89.3%), and the low-dose sirolimus group (89.3%). Serious adverse events were more common in the low-dose sirolimus group than in the other groups (53.2% vs. a range of 43.4 to 44.3%), although a similar proportion of patients in each group had at least one adverse event during treatment (86.3 to 90.5%). Conclusions: a regimen of daclizumab, mycophenolate mofetil, and corticosteroids in combination with low-dose tacrolimus may be advantageous for renal function, allograft survival, and acute rejection rates, as compared with regimens containing daclizumab induction plus either low-dose cyclosporine or low-dose sirolimus or with standard-dose cyclosporine without induction