Some remarks on particle size effects on the abrasion of a range of Fe based alloys

The low-stress three body abrasion behaviour of a range of steels was investigated. The tests were carried out in a rubber wheel tester (according to ASTM G65-94, reapproved in 2000) at room temperature. The abrasive particles used were angular alumina particles of four different sizes. The results showed that, in general, the smaller particles (50 8m and 125 8m average size) caused more damage. With these particles, observations of surface morphology indicarted a more intense cutting and ploughing action, leading to more damage, whereas bigger particles i.e. larger 250 8m and 560 8m particles produced less damage, and their action involved more plastic deformation type wear. The 304 SS had a lower abrasion resistance than the 310 SS. For the austentic and ferritic steels the subsurface deformation was larger for impact with the coarser particles. Variations in substrate hardness had no effect on the abrasive behaviour observed. On the whole, the hardest steel (mild steel in martensitic condition) showed the higher extent of damage, irrespective of particle size

Tribo-Corrosion behaviour of TiCxOy thin films in bio fluids

In recent years, the development of thin film systems for decorative applications has attracted significant attention in scientific research. These decorative coatings require, not only an attractive appearance for market applications, but also an ability to protect the surface underneath. Because of this, corrosion, wear and their combined effects (termed tribo-corrosion) are particularly important for lifetime prediction. The tribo-corrosion behaviour of a range of single layered titanium oxycarbide, TiCxOy,coatings, produced by DC reactive magnetron sputtering, has been studied and reported as a function of electrode potential (-0.9 V, -0.5 V, 0.0 V and +0.5 V) and applied load (3, 6 and 9 N). The study was conducted in a reciprocating sliding tribosystem (Plint TE 67/E) in a bio fluid (an artificial perspiration solution) at room temperature. During the wear tests, both the open-circuit potential and the corrosion current were monitored. The results showed that electrode potential and load have a significant influence on the total material loss. The variations in Rp (polarization resistance) and Cf(capacitance) before and after sliding, obtained by Electrochemical Impedance Spectroscopy (EIS) were evaluated in order to provide an understanding of the resistance of the film in such conditions. Tribo-corrosion maps were generated, based on the results, indicating the change in mechanisms of the tribological and corrosion parameters for such coatings

Low impact velocity wastage in FBCs : experimental results and comparison between abrasion and erosion theories

The use of technologies related to combustion of coal in fluidized bed combustors (FBCs) present attractive advantages over conventional pulverized coal units. Some of the outstanding characteristics are: excellent heat transfer, low emission of contaminants, good combustion efficiencies and good fuel flexibility. However, FBC units can suffer materials deterioration due to particle interaction of solid particles with the heat transfer tubes immersed on the bed (Hou, 2004, Oka, 2004, Rademarkers et al., 1990). Among other issues, some of the most important factors believed to cause wear problems are: the motion of slowly but relatively coarse particles, particles loaded onto the surface by other particles, erosion by relatively fast-moving particles associated with bubbles, and abrasion by blocks of particles thrown into the surface by bubble collapse. Thus, erosion or abrasion processes can occur by a variety of causes. For the case of particle movement against in-bed surfaces, it has been suggested that there is no difference in the ability to cause degradation between solid particle erosion and low stress three body abrasion, and distinctions between the two forms of wear should not to be made (Levy, 1987)

Confinement and the analytic structure of the one body propagator in Scalar QED

We investigate the behavior of the one body propagator in SQED. The self energy is calculated using three different methods: i) the simple bubble summation, ii) the Dyson-Schwinger equation, and iii) the Feynman-Schwinger represantation. The Feynman-Schwinger representation allows an {\em exact} analytical result. It is shown that, while the exact result produces a real mass pole for all couplings, the bubble sum and the Dyson-Schwinger approach in rainbow approximation leads to complex mass poles beyond a certain critical coupling. The model exhibits confinement, yet the exact solution still has one body propagators with {\it real} mass poles.Comment: 5 pages 2 figures, accepted for publication in Phys. Rev.

Representations of sport in the revolutionary socialist press in Britain, 1988–2012

This paper considers how sport presents a dualism to those on the far left of the political spectrum. A long-standing, passionate debate has existed on the contradictory role played by sport, polarised between those who reject it as a bourgeois capitalist plague and those who argue for its reclamation and reformation. A case study is offered of a political party that has consistently used revolutionary Marxism as the basis for its activity and how this party, the largest in Britain, addresses sport in its publications. The study draws on empirical data to illustrate this debate by reporting findings from three socialist publications. When sport did feature it was often in relation to high profile sporting events with a critical tone adopted and typically focused on issues of commodification, exploitation and alienation of athletes and supporters. However, readers’ letters, printed in the same publications, revealed how this interpretation was not universally accepted, thus illustrating the contradictory nature of sport for those on the far left

Recombinant Incretin-Secreting Microbe Improves Metabolic Dysfunction in High-Fat Diet Fed Rodents

peer-reviewedThe gut hormone glucagon-like peptide (GLP)-1 and its analogues represent a new generation of anti-diabetic drugs, which have also demonstrated propensity to modulate host lipid metabolism. Despite this, drugs of this nature are currently limited to intramuscular administration routes due to intestinal degradation. The aim of this study was to design a recombinant microbial delivery vector for a GLP-1 analogue and assess the efficacy of the therapeutic in improving host glucose, lipid and cholesterol metabolism in diet induced obese rodents. Diet-induced obese animals received either Lactobacillus paracasei NFBC 338 transformed to express a long-acting analogue of GLP-1 or the isogenic control microbe which solely harbored the pNZ44 plasmid. Short-term GLP-1 microbe intervention in rats reduced serum low-density lipoprotein cholesterol, triglycerides and triglyceride-rich lipoprotein cholesterol substantially. Conversely, extended GLP-1 microbe intervention improved glucose-dependent insulin secretion, glucose metabolism and cholesterol metabolism, compared to the high-fat control group. Interestingly, the microbe significantly attenuated the adiposity associated with the model and altered the serum lipidome, independently of GLP-1 secretion. These data indicate that recombinant incretin-secreting microbes may offer a novel and safe means of managing cholesterol metabolism and diet induced dyslipidaemia, as well as insulin sensitivity in metabolic dysfunction

The Coulomb law in the pure gauge U(1) theory on a lattice

We study the heavy charge potential in the Coulomb phase of pure gauge compact U(1) theory on the lattice. We calculate the static potential $V_W(T,{\vec R})$ from Wilson loops on a $16^3 \times 32$ lattice and compare with the predictions of lattice perturbation theory. We investigate finite size effects and, in particular, the importance of non-Coulomb contributions to the potential. We also comment on the existence of a maximal coupling in the Coulomb phase of pure gauge U(1) theory.Comment: 14 pages. LaTeX file and 3 postscript figure

Erosion-corrosion of carbon steel and 310 stainless steel at low impact velocities : Effect of erodent particle type

Se estudio el comportamiento de un acero al carbono (1020) y un acero inoxidable tipo 310 expuestos en condiciones de erosion-corrosion a bajas velocidades de impacto. Las partículas erosivas empleadas fueron SiO2 y Al2O3 con tamaños de partícula muy similar (≈ 600 μm) y el ambiente oxidante fue aire. Los experimentos fueron efectuados a dos temperaturas (450 C y 600 C) durante 24 horas y el rango de velocidades de impacto fue de 2.5 m/s a 4.5 m/s. En general, los resultados mostraron que las partículas de SiO2 causaron menos daño que las partículas de Al2O3, aunque las diferencias en el deterioro observado fueron más significantes para el acero al carbono, en particular a la temperatura más alta. Para el acero al carbono a 2.5 m/s, la morfología superficial mostro formación de ondulaciones (ripples) las cuales son típicamente asociadas a un proceso de erosión. Un aumento en la velocidad de impacto de las partículas modifica notoriamente la morfología de impacto, provocando fractura de oxido formado. Para el acero 310 a 2.5 m/s, la morfología de impacto mostro formación de ondulaciones al emplear ambos tipos de partícula. Sin embargo a velocidades de impacto por arriba de 2.5 m/s, las superficies de impacto muestran mayor pulido y áreas de corte, las cuales son menos pronunciadas cuando se usan las partículas de SiO2 en comparación con las partículas de Al2O3. Lo anterior se asocia con la forma de partícula erosiva: en el primer caso ocurre más deformación plástica superficial debido a la redondez de las mismas, mientras que en el segundo caso las partículas son más agudas. Se analiza y discuten posibles razones para explicar el deterioro observado en ambos materiales

Dual Superconductor Scenario of Confinement: A Systematic Study of Gribov Copy Effects

We perform a study of the effects from maximal abelian gauge Gribov copies in the context of the dual superconductor scenario of confinement, on the basis of a novel approach for estimation of systematic uncertainties from incomplete gauge fixing. We present numerical results, in SU(2) lattice gauge theory, using the overrelaxed simulated annealing gauge fixing algorithm. We find abelian and non-abelian string tensions to differ significantly, their ratio being 0.92(4) at BETA = 2.5115. An approximate factorization of the abelian potential into monopole and photon contributions has been confirmed, the former giving rise to the abelian string tension.Comment: 35 pages uucompressed LaTeX with 10 encapsuled postscript figure

Large sulfur isotope fractionations in Martian sediments at Gale crater

Variability in the sulfur isotopic composition in sediments can reflect atmospheric, geologic and biological processes. Evidence for ancient fluvio-lacustrine environments at Gale crater on Mars and a lack of efficient crustal recycling mechanisms on the planet suggests a surface environment that was once warm enough to allow the presence of liquid water, at least for discrete periods of time, and implies a greenhouse effect that may have been influenced by sulfur-bearing volcanic gases. Here we report in situ analyses of the sulfur isotopic compositions of SO2 volatilized from ten sediment samples acquired by NASA’s Curiosity rover along a 13 km traverse of Gale crater. We find large variations in sulfur isotopic composition that exceed those measured for Martian meteorites and show both depletion and enrichment in 34S. Measured values of δ34S range from −47 ± 14‰ to 28 ± 7‰, similar to the range typical of terrestrial environments. Although limited geochronological constraints on the stratigraphy traversed by Curiosity are available, we propose that the observed sulfur isotopic signatures at Gale crater can be explained by equilibrium fractionation between sulfate and sulfide in an impact-driven hydrothermal system and atmospheric processing of sulfur-bearing gases during transient warm periods