Magnetic phase transitions in Ta/CoFeB/MgO multilayers

We study thin films and magnetic tunnel junction nanopillars based on Ta/Co$_{20}$Fe$_{60}$B$_{20}$/MgO multilayers by electrical transport and magnetometry measurements. These measurements suggest that an ultrathin magnetic oxide layer forms at the Co$_{20}$Fe$_{60}$B$_{20}$/MgO interface. At approximately 160 K, the oxide undergoes a phase transition from an insulating antiferromagnet at low temperatures to a conductive weak ferromagnet at high temperatures. This interfacial magnetic oxide is expected to have significant impact on the magnetic properties of CoFeB-based multilayers used in spin torque memories

Crystallographically oriented Co and Ni nanocrystals inside ZnO formed by ion implantation and postannealing

In the last decade, transition-metal-doped ZnO has been intensively investigated as a route to room-temperature diluted magnetic semiconductors (DMSs). However, the origin for the reported ferromagnetism in ZnO-based DMS remains questionable. Possible options are diluted magnetic semiconductors, spinodal decomposition, or secondary phases. In order to clarify this question, we have performed a thorough characterization of the structural and magnetic properties of Co- and Ni-implanted ZnO single crystals. Our measurements reveal that Co or Ni nanocrystals (NCs) are the major contribution of the measured ferromagnetism. Already in the as-implanted samples, Co or Ni NCs have formed and they exhibit superparamagnetic properties. The Co or Ni NCs are crystallographically oriented with respect to the ZnO matrix. Their magnetic properties, e.g., the anisotropy and the superparamagnetic blocking temperature, can be tuned by annealing. We discuss the magnetic anisotropy of Ni NCs embedded in ZnO concerning the strain anisotropy.Comment: 13 pages, 14 figure

Ferromagnetism and Temperature-Driven Reorientation Transition in Thin Itinerant-Electron Films

The temperature-driven reorientation transition which, up to now, has been studied by use of Heisenberg-type models only, is investigated within an itinerant-electron model. We consider the Hubbard model for a thin fcc(100) film together with the dipole interaction and a layer-dependent anisotropy field. The isotropic part of the model is treated by use of a generalization of the spectral-density approach to the film geometry. The magnetic properties of the film are investigated as a function of temperature and film thickness and are analyzed in detail with help of the spin- and layer-dependent quasiparticle density of states. By calculating the temperature dependence of the second-order anisotropy constants we find that both types of reorientation transitions, from out-of-plane to in-plane (``Fe-type'') and from in-plane to out-of-plane (``Ni-type'') magnetization are possible within our model. In the latter case the inclusion of a positive volume anisotropy is vital. The reorientation transition is mediated by a strong reduction of the surface magnetization with respect to the inner layers as a function of temperature and is found to depend significantly on the total band occupation.Comment: 10 pages, 8 figures included (eps), Phys Rev B in pres

Prediction of a surface state and a related surface insulator-metal transition for the (100) surface of stochiometric EuO

We calculate the temperature and layer-dependent electronic structure of a 20-layer EuO(100)-film using a combination of first-principles and model calculation based on the ferromagnetic Kondo-lattice model. The results suggest the existence of a EuO(100) surface state which can lead to a surface insulator-metal transition.Comment: 9 pages, 5 figures, Phys. Rev. Lett. (in press

Magnetoelastic mechanism of spin-reorientation transitions at step-edges

The symmetry-induced magnetic anisotropy due to monoatomic steps at strained Ni films is determined using results of first - principles relativistic full-potential linearized augmented plane wave (FLAPW) calculations and an analogy with the N\'eel model. We show that there is a magnetoelastic anisotropy contribution to the uniaxial magnetic anisotropy energy in the vicinal plane of a stepped surface. In addition to the known spin-direction reorientation transition at a flat Ni/Cu(001) surface, we propose a spin-direction reorientation transition in the vicinal plane for a stepped Ni/Cu surface due to the magnetoelastic anisotropy. We show that with an increase of Ni film thickness, the magnetization in the vicinal plane turns perpendicular to the step edge at a critical thickness calculated to be in the range of 16-24 Ni layers for the Ni/Cu(1,1,13) stepped surface.Comment: Accepted for publication in Phys. Rev.

Electron Spin Resonance of the ferromagnetic Kondo lattice CeRuPO

The spin dynamics of the ferromagnetic Kondo lattice CeRuPO is investigated by Electron Spin Resonance (ESR) at microwave frequencies of 1, 9.4, and 34~GHz. The measured resonance can be ascribed to a rarely observed bulk Ce3+ resonance in a metallic Ce compound and can be followed below the ferromagnetic transition temperature Tc=14 K. At T>Tc the interplay between the RKKY-exchange interaction and the crystal electric field anisotropy determines the ESR parameters. Near Tc the spin relaxation rate is influenced by the critical fluctuations of the order parameter.Comment: This is an article accepted for publication in Journal of Physics: Condensed Matte

Spin waves in ultrathin ferromagnetic overlayers

The influence of a non-magnetic metallic substrate on the spin wave excitations in ultrathin ferromagnetic overlayers is investigated for different crystalline orientations. We show that spin wave dumping in these systems occur due to the tunneling of holes from the substrate into the overlayer, and that the spin wave energies may be considerably affected by the exchange coupling mediated by the substrate.Comment: RevTeX 4, 7 pages, 5 figures; submitted to Phys. Rev.

Enhanced biomedical heat-triggered carriers via nanomagnetism tuning in ferrite-based nanoparticles

Biomedical nanomagnetic carriers are getting a higher impact in therapy and diagnosis schemes while their constraints and prerequisites are more and more successfully confronted. Such particles should possess a well-defined size with minimum agglomeration and they should be synthesized in a facile and reproducible high-yield way together with a controllable response to an applied static or dynamic field tailored for the specific application. Here, we attempt to enhance the heating efficiency in magnetic particle hyperthermia treatment through the proper adjustment of the core–shell morphology in ferrite particles, by controlling exchange and dipolar magnetic interactions at the nanoscale. Thus, core–shell nanoparticles with mutual coupling of magnetically hard (CoFe2O4) and soft (MnFe2O4) components are synthesized with facile synthetic controls resulting in uniform size and shell thickness as evidenced by high resolution transmission electron microscopy imaging, excellent crystallinity and size monodispersity. Such a magnetic coupling enables the fine tuning of magnetic anisotropy and magnetic interactions without sparing the good structural, chemical and colloidal stability. Consequently, the magnetic heating efficiency of CoFe2O4 and MnFe2O4 core–shell nanoparticles is distinctively different from that of their counterparts, even though all these nanocrystals were synthesized under similar conditions. For better understanding of the AC magnetic hyperthermia response and its correlation with magnetic-origin features we study the effect of the volume ratio of magnetic hard and soft phases in the bimagnetic core−shell nanocrystals. Eventually, such particles may be considered as novel heating carriers that under further biomedical functionalization may become adaptable multifunctional heat-triggered nanoplatforms

Anisotropy of ultra-thin ferromagnetic films and the spin reorientation transition

The influence of uniaxial anisotropy and the dipole interaction on the direction of the magnetization of ultra-thin ferromagnetic films in the ground-state is studied. The ground-state energy can be expressed in terms of anisotropy constants which are calculated in detail as function of the system parameters and the film thickness. In particular non-collinear spin arrangements are taken into account. Conditions for the appearance of a spin reorientation transition are given and analytic results for the width of the canted phase and its shift in applied magnetic fields associated with this transition are derived.Comment: 6 pages, RevTeX