Charring rate for fire exposed X-Lam

Design of timber structures has been outlined in Eurocode 5. Notional charring rate for softwood and hardwood timber is given. For the performance of X-LAM panels in fire, only little information on charring is available and whether the fire behaviour of X-LAM is similar to homogenous timber panels has not yet been systematically analysed. This paper presents an overview of fire performance of X-LAM and evaluation of its resistance to elevated temperature as an element of structure in comparison to homogeneous timber panels. Numerical study has been carried out based on available experimental results. Charring rates for X-LAM panels obtained from experimental results are compared with those obtained from Eurocode 5 and proposed simplified model

The ππ\pi\pi interaction in nuclear matter from a study of the π+A→π+π±A′\pi^+ A \to \pi^+ \pi^{\pm} A' reactions

The pion-production reactions $\pi^+ A \to \pi^+\pi^{\pm} A'$ were studied on $^{2}H$, $^{12}C$, $^{40}Ca$, and $^{208}Pb$ nuclei at an incident pion energy of $T_{\pi^{+}}$=283 MeV. Pions were detected in coincidence using the CHAOS spectrometer. The experimental results are reduced to differential cross sections and compared to both theoretical predictions and the reaction phase space. The composite ratio $\cal C$$_{\pi\pi}^A$ between the $\pi^{+}\pi^{\pm}$ invariant masses on nuclei and on the nucleon is also presented. Near the $2m_{\pi}$ threshold pion pairs couple to $(\pi\pi)_{I=J=0}$ when produced in the $\pi^+\to \pi^+\pi^-$ reaction channel. There is a marked near-threshold enhancement of $\cal C$$_{\pi^+\pi^-}^A$ which is consistent with theoretical predictions addressing the partial restoration of chiral symmetry in nuclear matter. Furthermore, the behaviour of $\cal C$$_{\pi^+\pi^-}^A$ is well described when the restoration of chiral symmetry is combined with standard P-wave renormalization of pions in nuclear matter. On the other hand, nuclear matter only weakly influences $\cal C$$_{\pi^+\pi^+}^A$, which displays a flat behaviour throughout the energy range regardless of $A$.Comment: 30 pages, 16 figures, PS format, accepted for publication in Nucl. Phys

The pi -> pi pi process in nuclei and the restoration of chiral symmetry

The results of an extensive campaign of measurements of the pi -> pi pi process in the nucleon and nuclei at intermediate energies are presented. The measurements were motivated by the study of strong pi pi correlations in nuclei. The analysis relies on the composite ratio C_{pi pi}^A, which accounts for the clear effect of the nuclear medium on the (pi pi) system. The comparison of the C_{pi pi}^A distributions for the (pi pi)_{I=J=0} and (pi pi)_{I=0,J=2} systems to the model predictions indicates that the C_{pi pi}^A behavior in proximity of the 2m_pi threshold is explainable through the partial restoration of chiral symmetry in nuclei.Comment: accepted for publication in Nucl. Phys.

INFN What Next: Ultra-relativistic Heavy-Ion Collisions

This document was prepared by the community that is active in Italy, within INFN (Istituto Nazionale di Fisica Nucleare), in the field of ultra-relativistic heavy-ion collisions. The experimental study of the phase diagram of strongly-interacting matter and of the Quark-Gluon Plasma (QGP) deconfined state will proceed, in the next 10-15 years, along two directions: the high-energy regime at RHIC and at the LHC, and the low-energy regime at FAIR, NICA, SPS and RHIC. The Italian community is strongly involved in the present and future programme of the ALICE experiment, the upgrade of which will open, in the 2020s, a new phase of high-precision characterisation of the QGP properties at the LHC. As a complement of this main activity, there is a growing interest in a possible future experiment at the SPS, which would target the search for the onset of deconfinement using dimuon measurements. On a longer timescale, the community looks with interest at the ongoing studies and discussions on a possible fixed-target programme using the LHC ion beams and on the Future Circular Collider.Comment: 99 pages, 56 figure

General properties of the pion production reaction in nuclear matter

The pion production reaction $\pi^+ \to \pi^+\pi^{\pm}$ on $^{45}Sc$ was studied at incident pion energies of $T_{\pi^{+}}$ = 240, 260, 280, 300, and 320 MeV. The experiment was performed using the $M11$ pion-channel at TRIUMF, and multiparticle events, ($\pi^+,\pi^+\pi^{\pm}$) and ($\pi^+,\pi^+\pi^{\pm}p$), were detected with the CHAOS spectrometer. Results are reported in the form of both differential and total cross sections, and are compared to theoretical predictions and the reaction phase space. The present investigation of the T-dependence of the $\pi^+ A \to \pi^+\pi^{\pm} A'$ reaction complements earlier examinations of the A-dependence of the reaction, which was measured using $^{2}H$, $^{4}He$, $^{12}C$, $^{16}O$, $^{40}Ca$, and $^{208}Pb$ targets at $\sim$280 MeV. Some general properties of the pion-induced pion production reaction in nuclear matter will be presented, based on the combined results of the two studies.Comment: 23 pages, Latex, accepted for publication in Nucl. Phys.

Multiplicity dependence of jet-like two-particle correlations in p-Pb collisions at sNN\sqrt{s_{NN}} = 5.02 TeV

Two-particle angular correlations between unidentified charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV. The transverse-momentum range 0.7 $< p_{\rm{T}, assoc} < p_{\rm{T}, trig} <$ 5.0 GeV/$c$ is examined, to include correlations induced by jets originating from low momen\-tum-transfer scatterings (minijets). The correlations expressed as associated yield per trigger particle are obtained in the pseudorapidity range $|\eta|<0.9$. The near-side long-range pseudorapidity correlations observed in high-multiplicity p-Pb collisions are subtracted from both near-side short-range and away-side correlations in order to remove the non-jet-like components. The yields in the jet-like peaks are found to be invariant with event multiplicity with the exception of events with low multiplicity. This invariance is consistent with the particles being produced via the incoherent fragmentation of multiple parton--parton scatterings, while the yield related to the previously observed ridge structures is not jet-related. The number of uncorrelated sources of particle production is found to increase linearly with multiplicity, suggesting no saturation of the number of multi-parton interactions even in the highest multiplicity p-Pb collisions. Further, the number scales in the intermediate multiplicity region with the number of binary nucleon-nucleon collisions estimated with a Glauber Monte-Carlo simulation.Comment: 23 pages, 6 captioned figures, 1 table, authors from page 17, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/161

Effective Rheology of Bubbles Moving in a Capillary Tube

We calculate the average volumetric flux versus pressure drop of bubbles moving in a single capillary tube with varying diameter, finding a square-root relation from mapping the flow equations onto that of a driven overdamped pendulum. The calculation is based on a derivation of the equation of motion of a bubble train from considering the capillary forces and the entropy production associated with the viscous flow. We also calculate the configurational probability of the positions of the bubbles.Comment: 4 pages, 1 figur

Comparative study of Global, European and Italian Standards on Hydrogen Refueling Stations

The purpose of this paper is to give a strategic overview of the existing standards governing the construction and operation of hydrogen refueling stations. A succinct and comprehensive study of hydrogen refueling station standards globally, in Europe, and in Italy is conducted and discussed in light of the new European Hydrogen Strategy and Roadmap. Among the numerous topics examined, a particular emphasis is placed on the standards in force for on-site hydrogen production via water electrolysis, hydrogen storage, both liquid and gaseous, and refueling protocols for light-duty and heavy-duty vehicles, on an international level through the provision of ISO, IEC, and SAE standards; on a European level through the examination of the CEN/CENELEC database; and on an Italian national level through the analysis of the UNI database

Charge separation relative to the reaction plane in Pb-Pb collisions at sNN=2.76\sqrt{s_{\rm NN}}= 2.76 TeV

Measurements of charge dependent azimuthal correlations with the ALICE detector at the LHC are reported for Pb-Pb collisions at $\sqrt{s_{\rm NN}} = 2.76$ TeV. Two- and three-particle charge-dependent azimuthal correlations in the pseudo-rapidity range $|\eta| < 0.8$ are presented as a function of the collision centrality, particle separation in pseudo-rapidity, and transverse momentum. A clear signal compatible with a charge-dependent separation relative to the reaction plane is observed, which shows little or no collision energy dependence when compared to measurements at RHIC energies. This provides a new insight for understanding the nature of the charge dependent azimuthal correlations observed at RHIC and LHC energies.Comment: 12 pages, 3 captioned figures, authors from page 2 to 6, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/286

Composite Wood–Concrete Structural Floor System with Horizontal Connectors

The concept of horizontal shear connection utilization on wood–concrete beams intends to be an alternative connection detail for composite wood–concrete decks. The volume of sawn-wood is over three times more expensive than concrete, in Brazil. In order to be competitive in the Brazilian market we need a composite deck with the least amount of wood and a simple and inexpensive connection detail. This research project uses medium to high density tropical hardwoods managed from the Brazilian Amazon region and construction steel rods. The beams studied are composed of a bottom layer of staggered wood boards and a top layer of concrete. The wood members are laterally nailed together to form a wide beam, and horizontal rebar connectors are installed before the concrete layer is applied on top. Two sets of wood–concrete layered beams with horizontal rebar connectors (6 and 8) were tested in third-point loading flexural bending. The initial results reveal medium composite efficiency for the beams tested. An improvement on the previously conceived connection detail (set with six connectors) for the composite wood–concrete structural floor system was achieved by the set with eight connectors. The new layout of the horizontal rebar connectors added higher composite efficiency for the beams tested. Further analysis with advanced rigorous numerical Finite Element Modeling is suggested to optimize the connection parameters. Composite wood–concrete decks can attend a large demand for pedestrian bridges, as well as residential and commercial slabs in the Brazilian Amazon. © 2014, The Author(s)