Cation distribution in manganese cobaltite spinels Co3−xMnxO4 (0 ≤ x ≤ 1) determined by thermal analysis

Thermogravimetric analysis was used in order to study the reduction in air of submicronic powders of Co3−x Mn x O4 spinels, with 0 ≤ x ≤ 1. For x = 0 (i.e. Co3O4), cation reduction occurred in a single step. It involved the CoIII ions at the octahedral sites, which were reduced to Co2+ on producing CoO. For 0 < x ≤ 1, the reduction occurred in two stages at increasing temperature with increasing amounts of manganese. The first step corresponded to the reduction of octahedral CoIII ions and the second was attributed to the reduction of octahedral Mn4+ ions to Mn3+. From the individual weight losses and the electrical neutrality of the lattice, the CoIII and Mn4+ ion concentrations were calculated. The distribution of cobalt and manganese ions present on each crystallographic site of the spinel was determined. In contrast to most previous studies that took into account either CoIII and Mn3+ or Co2+, CoIII and Mn4+ only, our thermal analysis study showed that Co2+/CoIII and Mn3+/Mn4+ pairs occupy the octahedral sites. These results were used to explain the resistivity measurements carried out on dense ceramics prepared from our powders sintered at low temperature (700–750 °C) in a Spark Plasma Sintering apparatus

Evidence for the h_b(1P) meson in the decay Upsilon(3S) --> pi0 h_b(1P)

Using a sample of 122 million Upsilon(3S) events recorded with the BaBar detector at the PEP-II asymmetric-energy e+e- collider at SLAC, we search for the $h_b(1P)$ spin-singlet partner of the P-wave chi_{bJ}(1P) states in the sequential decay Upsilon(3S) --> pi0 h_b(1P), h_b(1P) --> gamma eta_b(1S). We observe an excess of events above background in the distribution of the recoil mass against the pi0 at mass 9902 +/- 4(stat.) +/- 2(syst.) MeV/c^2. The width of the observed signal is consistent with experimental resolution, and its significance is 3.1sigma, including systematic uncertainties. We obtain the value (4.3 +/- 1.1(stat.) +/- 0.9(syst.)) x 10^{-4} for the product branching fraction BF(Upsilon(3S)-->pi0 h_b) x BF(h_b-->gamma eta_b).Comment: 8 pages, 4 postscript figures, submitted to Phys. Rev. D (Rapid Communications

Long-term durability of alumina ceramic heads in THA

Background: The optimal type of bearing for hip arthroplasty remains a matter of debate. Ceramic-on-polyethylene (CoP) bearings are frequently used in younger and more active patients to reduce wear and increase biocompatibility compared to Metal-on-Polyethylene (MoP) bearings. However, in comparison to metal heads, the fracture risk of ceramic heads is higher. In addition, ceramic head fractures pose a serious complication which often necessitates major revision surgery. To date, there are no long-term data (>20 years of follow-up) reporting fracture rates of the ceramic femoral heads in CoP bearings. The purpose of this research was to investigate long-term CoP fracture rate. Methods: We evaluated the clinical and radiographic results of 348 cementless THAs treated with 2nd generation Biolox® Al2O3 Ceramic-on-Polyethylene (CoP) bearings consecutively implanted between January 1985 and December 1989. The mean age at implantation was 57 years. The patients were followed for a minimum of 20 years. At the final 111 had died, and 5 were lost to follow-up. The cumulative incidence of ceramic head fractures in the long-term was estimated using a competing risk analysis. Results: The cumulative incidence of ceramic head fracture after 22-years was estimated with a competing risk analysis at 0.29% after 22-years (SE = 2.09%; 95% - CI: 0.03-1.5%). The radiographic analysis revealed no impending failures at final follow-up. Discussion/Conclusion: The fracture rate of second-generation ceramic heads using a CoP articulation remains very low into the third decade after cementless THA

ICE COLD ERIC – International collaborative effort on chronic obstructive lung disease: exacerbation risk index cohorts – Study protocol for an international COPD cohort study

<p>Abstract</p> <p>Background</p> <p>Chronic Obstructive Pulmonary Disease (COPD) is a systemic disease; morbidity and mortality due to COPD are on the increase, and it has great impact on patients' lives. Most COPD patients are managed by general practitioners (GP). Too often, GPs base their initial assessment of patient's disease severity mainly on lung function. However, lung function correlates poorly with COPD-specific health-related quality of life and exacerbation frequency. A validated COPD disease risk index that better represents the clinical manifestations of COPD and is feasible in primary care seems to be useful. The objective of this study is to develop and validate a practical COPD disease risk index that predicts the clinical course of COPD in primary care patients with GOLD stages 2–4.</p> <p>Methods/Design</p> <p>We will conduct 2 linked prospective cohort studies with COPD patients from GPs in Switzerland and the Netherlands. We will perform a baseline assessment including detailed patient history, questionnaires, lung function, history of exacerbations, measurement of exercise capacity and blood sampling. During the follow-up of at least 2 years, we will update the patients' profile by registering exacerbations, health-related quality of life and any changes in the use of medication. The primary outcome will be health-related quality of life. Secondary outcomes will be exacerbation frequency and mortality. Using multivariable regression analysis, we will identify the best combination of variables predicting these outcomes over one and two years and, depending on funding, even more years.</p> <p>Discussion</p> <p>Despite the diversity of clinical manifestations and available treatments, assessment and management today do not reflect the multifaceted character of the disease. This is in contrast to preventive cardiology where, nowadays, the treatment in primary care is based on patient-specific and fairly refined cardiovascular risk profile corresponding to differences in prognosis. After completion of this study, we will have a practical COPD-disease risk index that predicts the clinical course of COPD in primary care patients with GOLD stages 2–4. In a second step we will incorporate evidence-based treatment effects into this model, such that the instrument may guide physicians in selecting treatment based on the individual patients' prognosis.</p> <p>Trial registration</p> <p>ClinicalTrials.gov Archive NCT00706602</p

Alumina-on-Polyethylene Bearing Surfaces in Total Hip Arthroplasty

The long-term durability of polyethylene lining total hip arthroplasty (THA) mainly depends on periprosthetic osteolysis due to wear particles, especially in young active patients. In hip simulator study, reports revealed significant wear reduction of the alumina ceramic-on-polyethylene articulation of THA compared with metal-on-polyethylene bearing surfaces. However, medium to long-term clinical studies of THA using the alumina ceramic-on-polyethylene are few and the reported wear rate of this articulation is variable. We reviewed the advantages and disadvantages of ceramicon- polyethylene articulation in THA, hip simulator study and retrieval study for polyethylene wear, in vivo clinical results of THA using alumina ceramic-on-polyethylene bearing surfaces in the literature, and new trial alumina ceramic-onhighly cross linked polyethylene bearing surfaces

Observation of the Decay B=> J/psi eta K and Search for X(3872)=> J/psi eta

We report the observation of the $B$ meson decay $B^\pm\to J/\psi \eta K^\pm$ and evidence for the decay $B^0\to J/\psi \eta K^0_S$, using {90} million $BBbar$ events collected at the \ensuremath{\Upsilon{(4S)}}\xspace resonance with the $BaBar$ detector at the PEP-II $e^+ e^-$ asymmetric-energy storage ring. We obtain branching fractions of $\cal{B}$$(B^\pm\to J/\psi \eta K^{\pm}$)=$(10.8\pm 2.3(\rm{stat.})\pm 2.4(\rm{syst.}))\times 10^{-5}$ and $\cal{B}$$(B^0\to J/\psi\eta K_{\rm{S}}^{0}$)=$(8.4\pm 2.6(\rm{stat.})\pm 2.7(\rm{syst.}))\times 10^{-5}$. We search for the new narrow mass state, the X(3872), recently reported by the Belle Collaboration, in the decay B^\pm\to X(3872)K^\pm, X(3872)\to \jpsi \eta and determine an upper limit of $\cal{B}$(B^\pm \to X(3872) K^\pm \to \jpsi \eta K^\pm) $<7.7\times 10^{-6}$ at 90% C.L.Comment: 7 pages and two figures, submitted to Phys. Rev. Lett