66 research outputs found

    Thermoplastic deformation of silicon surfaces induced by ultrashort pulsed lasers in submelting conditions

    Full text link
    A hybrid 2D theoretical model is presented to describe thermoplastic deformation effects on silicon surfaces induced by single and multiple ultrashort pulsed laser irradiation in submelting conditions. An approximation of the Boltzmann transport equation is adopted to describe the laser irradiation process. The evolution of the induced deformation field is described initially by adopting the differential equations of dynamic thermoelasticity while the onset of plastic yielding is described by the von Mise's stress. Details of the resulting picometre sized crater, produced by irradiation with a single pulse, are then discussed as a function of the imposed conditions and thresholds for the onset of plasticity are computed. Irradiation with multiple pulses leads to ripple formation of nanometre size that originates from the interference of the incident and a surface scattered wave. It is suggested that ultrafast laser induced surface modification in semiconductors is feasible in submelting conditions, and it may act as a precursor of the incubation effects observed at multiple pulse irradiation of materials surfaces.Comment: To appear in the Journal of Applied Physic

    Fermionic Bound States and Pseudoscalar Exchange

    Get PDF
    We discuss the possibility that fermions bind due to Higgs or pseudoscalar exchange. It is reasonable to believe on qualitative grounds that this can occur for fermions with a mass larger than 800-900 GeV. An exchange of a pseudoscalar boson leads in the non-relativistic limit to an unacceptable potential which behaves like 1/r^3 at the origin. We show that this singular behaviour is smeared out when relativistic effects are included

    Analysis of dynamic mechanical response in torsion

    No full text
    We investigate the dynamic response of industrial rubbers (styrene-butadiene random copolymers, SBR) in torsion and compare against common small amplitude oscillatory shear measurements by using a torsion rectangular fixture, a modified torsion cylindrical fixture, and a conventional parallel plate fixture, respectively, in two different rheometers (ARES 2kFRTN1 from TA Instruments, USA and MCR 702 from Anton Paar-Physica, Austria). The effects of specimen geometry (length-to-width aspect ratio) on storage modulus and level of clamping are investigated. For cylindrical specimens undergoing torsional deformation, we find that geometry and clamping barely affect the shear moduli, and the measurements essentially coincide with those using parallel plates. In contrast, a clear dependence of the storage modulus on the aspect ratio is detected for specimens having rectangular cross section. The empirical correction used routinely in this test is based on geometrical factors and can account for clamping effects, but works only for aspect ratios above a threshold value of 1.4. By employing a finite element analysis, we perform a parametric study of the effects of the aspect ratio in the cross-sectional stress distribution and the linear viscoelastic torsional response. We propose a new, improved empirical equation for obtaining accurate moduli values in torsion at different aspect ratios, whose general validity is demonstrated in both rheometers. These results should provide a guideline for measurements with different elastomers, for which comparison with dynamic oscillatory tests may not be possible due to wall slip issues

    Dynamics of ripple formation on silicon surfaces by ultrashort laser pulses in sub-ablation conditions

    Full text link
    An investigation of ultrashort pulsed laser induced surface modification due to conditions that result in a superheated melted liquid layer and material evaporation are considered. To describe the surface modification occurring after cooling and resolidification of the melted layer and understand the underlying physical fundamental mechanisms, a unified model is presented to account for crater and subwavelength ripple formation based on a synergy of electron excitation and capillary waves solidification. The proposed theoretical framework aims to address the laser-material interaction in sub-ablation conditions and thus minimal mass removal in combination with a hydrodynamics-based scenario of the crater creation and ripple formation following surface irradiation with single and multiple pulses, respectively. The development of the periodic structures is attributed to the interference of the incident wave with a surface plasmon wave. Details of the surface morphology attained are elaborated as a function of the imposed conditions and results are tested against experimental data

    Two fermion relativistic bound states: hyperfine shifts

    Full text link
    We discuss the hyperfine shifts of the Positronium levels in a relativistic framework, starting from a two fermion wave equation where, in addition to the Coulomb potential, the magnetic interaction between spins is described by a Breit term. We write the system of four first order differential equations describing this model. We discuss its mathematical features, mainly in relation to possible singularities that may appear at finite values of the radial coordinate. We solve the boundary value problems both in the singular and non singular cases and we develop a perturbation scheme, well suited for numerical computations, that allows to calculate the hyperfine shifts for any level, according to well established physical arguments that the Breit term must be treated at the first perturbative order. We discuss our results, comparing them with the corresponding values obtained from semi-classical expansions.Comment: 16 page

    Ultrafast dynamics and sub-wavelength periodic structure formation following irradiation of GaAs with femtosecond laser pulses

    Full text link
    A theoretical investigation of the ultrafast processes and dynamics of the excited carriers upon irradiation of GaAs with femtosecond (fs) pulsed lasers is performed in conditions that induce material damage and eventually surface modification of the heated solid. A parametric study is followed to correlate the produced transient carrier density with the damage threshold for various pulse duration values {\tau}p (it increases as ~ at relatively small values of {\tau}p while it drops for pulse durations of the order of some picoseconds) based on the investigation of the fundamental multiscale physical processes following fs-laser irradiation. Moreover, fluence values for which the originally semiconducting material demonstrates a metallic behaviour are estimated. It is shown that a sufficient number of carriers in the conduction band are produced to excite Surface Plasmon (SP) waves that upon coupling with the incident beam and a fluid-based surface modification mechanism lead to the formation of sub-wavelength periodic structures orientated perpendicularly to the laser beam polarization. Experimental results for the damage threshold and the frequencies of induced periodic structures show a good agreement with the theoretical predictions.Comment: 11 color pages To appear in the Physical Review

    Heuristic Models of Two-Fermion Relativistic Systems with Field-Type Interaction

    Get PDF
    We use the chain of simple heuristic expedients to obtain perturbative and exactly solvable relativistic spectra for a family of two-fermionic bound systems with Coulomb-like interaction. In the case of electromagnetic interaction the spectrum coincides up to the second order in a coupling constant with that following from the quantum electrodynamics. Discrepancy occurs only for S-states which is the well-known difficulty in the bound-state problem. The confinement interaction is considered too. PACS number(s): 03.65.Pm, 03.65.Ge, 12.39.PnComment: 16 pages, LaTeX 2.0
    corecore