Recent developments in CID imaging

Readout of CID imaging arrays was first performed by injecting and detecting the signal charge from each sensing site in sequence. A new readout method, termed parallel injection, has been developed in which the functions of signal charge detection and injection have been separated. The level of signal charge at each sensing site is detected during a line scan, and during the line retrace interval, all charge in the selected line is injected. The parallel injection technique is well adapted to TV scan formats in that the signal is read out at high speed, line by line. A 244 line by 248 element TV compatible imager, employing this technique and including an on chip preamplifier, has been constructed and operation demonstrated

Cross-waves induced by the vertical oscillation of a fully immersed vertical plate

Capillary waves excited by the vertical oscillations of a thin elongated plate below an air-water interface are analyzed using time-resolved measurements of the surface topography. A parametric instability is observed above a well defined acceleration threshold, resulting in a so-called cross-wave, a staggered wave pattern localized near the wavemaker and oscillating at half the forcing frequency. This cross-wave, which is stationary along the wavemaker but propagative away from it, is described as the superposition of two almost anti-parallel propagating parametric waves making a small angle of the order of $20^\mathrm{o}$ with the wavemaker edge. This contrasts with the classical Faraday parametric waves, which are exactly stationnary because of the homogeneity of the forcing. Our observations suggest that the selection of the cross-wave angle results from a resonant mechanism between the two parametric waves and a characteristic length of the surface deformation above the wavemaker.Comment: to appear in Physics of Fluid

Improved charge injection device and a focal plane interface electronics board for stellar tracking

An improved Charge Injection Device (CID) stellar tracking sensor and an operating sensor in a control/readout electronics board were developed. The sensor consists of a shift register scanned, 256x256 CID array organized for readout of 4x4 subarrays. The 4x4 subarrays can be positioned anywhere within the 256x256 array with a 2 pixel resolution. This allows continuous tracking of a number of stars simultaneously since nine pixels (3x3) centered on any star can always be read out. Organization and operation of this sensor and the improvements in design and semiconductor processing are described. A hermetic package incorporating an internal thermoelectric cooler assembled using low temperature solders was developed. The electronics board, which contains the sensor drivers, amplifiers, sample hold circuits, multiplexer, analog to digital converter, and the sensor temperature control circuits, is also described. Packaged sensors were evaluated for readout efficiency, spectral quantum efficiency, temporal noise, fixed pattern noise, and dark current. Eight sensors along with two tracker electronics boards were completed, evaluated, and delivered

Direct tunneling delay time measurement in an optical lattice

We report on the measurement of the time required for a wave packet to tunnel through the potential barriers of an optical lattice. The experiment is carried out by loading adiabatically a Bose-Einstein condensate into a 1D optical lattice. A sudden displacement of the lattice by a few tens of nm excites the micromotion of the dipole mode. We then directly observe in momentum space the splitting of the wave packet at the turning points and measure the delay between the reflected and the tunneled packets for various initial displacements. Using this atomic beam splitter twice, we realize a chain of coherent micron-size Mach-Zehnder interferometers at the exit of which we get essentially a wave packet with a negative momentum, a result opposite to the prediction of classical physics

Design, fabrication, and delivery of a charge injection device as a stellar tracking device

Six 128 x 128 CID imagers fabricated on bulk silicon and with thin polysilicon upper-level electrodes were tested in a star tracking mode. Noise and spectral response were measured as a function of temperature over the range of +25 C to -40 C. Noise at 0 C and below was less than 40 rms carriers/pixel for all devices at an effective noise bandwidth of 150 Hz. Quantum yield for all devices averaged 40% from 0.4 to 1.0 microns with no measurable temperature dependence. Extrapolating from these performance parameters to those of a large (400 x 400) array and accounting for design and processing improvements, indicates that the larger array would show a further improvement in noise performance -- on the order of 25 carriers. A preliminary evaluation of the projected performance of the 400 x 400 array and a representative set of star sensor requirements indicates that the CID has excellent potential as a stellar tracking device

Parametrically excited helicopter ground resonance dynamics with high blade asymmetries

The present work is aimed at verifying the influence of high asymmetries in the variation of in-plane lead-lag stiffness of one blade on the ground resonance phenomenon in helicopters. The periodical equations of motions are analyzed by using Floquet's Theory (FM) and the boundaries of instabilities predicted. The stability chart obtained as a function of asymmetry parameters and rotor speed reveals a complex evolution of critical zones and the existence of bifurcation points at low rotor speed values. Additionally, it is known that when treated as parametric excitations; periodic terms may cause parametric resonances in dynamic systems, some of which can become unstable. Therefore, the helicopter is later considered as a parametrically excited system and the equations are treated analytically by applying the Method of Multiple Scales (MMS). A stability analysis is used to verify the existence of unstable parametric resonances with first and second-order sets of equations. The results are compared and validated with those obtained by Floquet's Theory. Moreover, an explanation is given for the presence of unstable motion at low rotor speeds due to parametric instabilities of the second order

Volcans de la Chaîne des Puys (Massif Central, France) : point sur la chronologie Vasset-Kilian-Pariou-Chopine

ThermoluminescenceInternational audienceLa compilation des datations radiocarbone de bois carbonisés par leurs déferlantes basales, complétée par des observations téphrochronologiques, permet d'avancer que le puy Chopine, il y a environ 9700 ans, a précédé le Vasset et le Kilian, tous deux péné-contemporains, vers 9400-9300 ans. Les produits du Nouveau Pariou sont recouverts par ceux d'un volcan trachytique, probablement le Kilian. Sous les produits explosifs initiaux du Nouveau Pariou (faciès "Traversin"), les trachytes à amphibole qui avaient été attribués au Kilian, sont vraisemblablement une forme méconnue des trachytes de la phase acide du Pariou lui-même. L'ordre chronologique des éruptions serait donc : Chopine/Pariou/?Vasset?/Kilian, la position du Vasset, hypothétique, restant à confirme

Wavelets techniques for pointwise anti-Holderian irregularity

In this paper, we introduce a notion of weak pointwise Holder regularity, starting from the de nition of the pointwise anti-Holder irregularity. Using this concept, a weak spectrum of singularities can be de ned as for the usual pointwise Holder regularity. We build a class of wavelet series satisfying the multifractal formalism and thus show the optimality of the upper bound. We also show that the weak spectrum of singularities is disconnected from the casual one (denoted here strong spectrum of singularities) by exhibiting a multifractal function made of Davenport series whose weak spectrum di ers from the strong one

Anisotropy of the Seebeck Coefficient in the Cuprate Superconductor YBa2_{2}Cu3_{3}Oy_{y}: Fermi-Surface Reconstruction by Bidirectional Charge Order

The Seebeck coefficient $S$ of the cuprate YBa$_{2}$Cu$_{3}$O$_{y}$ was measured in magnetic fields large enough to suppress superconductivity, at hole dopings $p = 0.11$ and $p = 0.12$, for heat currents along the $a$ and $b$ directions of the orthorhombic crystal structure. For both directions, $S/T$ decreases and becomes negative at low temperature, a signature that the Fermi surface undergoes a reconstruction due to broken translational symmetry. Above a clear threshold field, a strong new feature appears in $S_{\rm b}$, for conduction along the $b$ axis only. We attribute this feature to the onset of 3D-coherent unidirectional charge-density-wave modulations seen by x-ray diffraction, also along the $b$ axis only. Because these modulations have a sharp onset temperature well below the temperature where $S/T$ starts to drop towards negative values, we infer that they are not the cause of Fermi-surface reconstruction. Instead, the reconstruction must be caused by the quasi-2D bidirectional modulations that develop at significantly higher temperature.Comment: 7 pages, 5 figure