The 6-GHz multibeam maser survey III: comparison between the MMB and HOPS

We have compared the occurrence of 6.7-GHz and 12.2-GHz methanol masers with 22-GHz water masers and 6035-MHz excited-state OH masers in the 100 square degree region of the southern Galactic plane common to the Methanol Multibeam (MMB) and H2O southern Galactic Plane surveys (HOPS). We find the most populous star formation species to be 6.7-GHz methanol, followed by water, then 12.2-GHz and, finally, excited-state OH masers. We present association statistics, flux density (and luminosity where appropriate) and velocity range distributions across the largest, fully surveyed portion of the Galactic plane for four of the most common types of masers found in the vicinity of star formation regions. Comparison of the occurrence of the four maser types with far-infrared dust temperatures shows that sources exhibiting excited-state OH maser emission are warmer than sources showing any of the other three maser types. We further find that sources exhibiting both 6.7-GHz and 12.2-GHz methanol masers are warmer than sources exhibiting just 6.7-GHz methanol maser emission. These findings are consistent with previously made suggestions that both OH and 12.2-GHz methanol masers generally trace a later stage of star formation compared to other common maser types

Influence of adipocyte size and adipose depot on the number of adipose tissue macrophages and the expression of adipokines in dairy cows at the end of pregnancy

The aim of this study was to determine the number of adipose tissue macrophages (ATM) and the mRNA expression of adipokines [adiponectin (ADIPOQ), leptin (LEP), interleukin 6 (IL6), tumor necrosis factor (TNF), and interleukin 10 (IL10)] in different adipose depots from cows with a variable body condition score (BCS) at the end of the dry period. We hypothesized that the number of ATM and the expression of these adipokines depend on adipocyte size and the anatomical location of the adipose depot. Subcutaneous, omental, mesenteric, perirenal, and intrapelvic adipose tissue samples were taken immediately after euthanasia of 10 Holstein Friesian dairy cows (upcoming parity 2 to 5, age 3.9 ± 1.4 yr; mean ± standard deviation) at the end of pregnancy (actual days of pregnancy at the moment of euthanasia: 269 ± 5 d). During the dry period, all animals received similar diets to meet but not exceed requirements. Five animals were considered to have a normal BCS (2.5-3.5) and 5 animals were considered to be over-conditioned (BCS = 3.75-5). Body weight of the animals at the moment of euthanasia was 717 ± 77 kg. Expression of the different genes was determined by reverse transcription quantitative real-time PCR. Adipocyte size was determined by measuring the area of 100 adipocytes on histological sections. Average adipocyte area was 10,475 ± 1,019, 8,500 ± 780, 10,383 ± 1,227, 11,466 ± 1,039, and 11,087 ± 1,632 µm2 for the subcutaneous, mesenteric, omental, intrapelvic, and perirenal adipose depot, respectively. Immunohistochemistry using anti-bovine CD172a antibodies was performed to determine the proportion of ATM (the number of CD172a-positive cells per 100 adipocytes, given as a percentage). Expression of LEP, IL6, and TNF was positively associated with adipocyte size, whereas no association could be detected between ADIPOQ and IL10 with the size of the adipocytes. The omental adipose depot was especially infiltrated with ATM (1.92 ± 0.55, 1.10 ± 0.33, and 8.28 ± 2.24% for the subcutaneous, mesenteric, and omental adipose depot, respectively). The proportion of ATM was positively associated with the size of the adipocytes in the omental and mesenteric adipose depot. Expression of ADIPOQ, LEP, IL6, TNF, and IL10 differed among depots, which suggests differences in inflammatory characteristics depending on the anatomical location of depots. In conclusion, the results of the present study confirm the adipose tissue as a potential source of inflammatory mediators and demonstrate ATM infiltration, especially in the omental adipose depot

Effective Rheology of Bubbles Moving in a Capillary Tube

We calculate the average volumetric flux versus pressure drop of bubbles moving in a single capillary tube with varying diameter, finding a square-root relation from mapping the flow equations onto that of a driven overdamped pendulum. The calculation is based on a derivation of the equation of motion of a bubble train from considering the capillary forces and the entropy production associated with the viscous flow. We also calculate the configurational probability of the positions of the bubbles.Comment: 4 pages, 1 figur

A systematic review of the evidence for single stage and two stage revision of infected knee replacement

BACKGROUND: Periprosthetic infection about the knee is a devastating complication that may affect between 1% and 5% of knee replacement. With over 79 000 knee replacements being implanted each year in the UK, periprosthetic infection (PJI) is set to become an important burden of disease and cost to the healthcare economy. One of the important controversies in treatment of PJI is whether a single stage revision operation is superior to a two-stage procedure. This study sought to systematically evaluate the published evidence to determine which technique had lowest reinfection rates. METHODS: A systematic review of the literature was undertaken using the MEDLINE and EMBASE databases with the aim to identify existing studies that present the outcomes of each surgical technique. Reinfection rate was the primary outcome measure. Studies of specific subsets of patients such as resistant organisms were excluded. RESULTS: 63 studies were identified that met the inclusion criteria. The majority of which (58) were reports of two-stage revision. Reinfection rated varied between 0% and 41% in two-stage studies, and 0% and 11% in single stage studies. No clinical trials were identified and the majority of studies were observational studies. CONCLUSIONS: Evidence for both one-stage and two-stage revision is largely of low quality. The evidence basis for two-stage revision is significantly larger, and further work into direct comparison between the two techniques should be undertaken as a priority

Seamounts

Definition: Seamounts are literally mountains rising from the seafloor. More specifically, they are “any geographically isolated topographic feature on the seafloor taller than 100 m, including ones whose summit regions may temporarily emerge above sea level, but not including features that are located on continental shelves or that are part of other major landmasses” (Staudigel et al., 2010). The term “guyot” can be used for seamounts having a truncated cone shape with a flat summit produced by erosion at sea level (Hess, 1946), development of carbonate reefs (e.g., Flood, 1999), or partial collapse due to caldera formation (e.g., Batiza et al., 1984). Seamounts <1,000 m tall are sometimes referred to as “knolls” (e.g., Hirano et al., 2008). “Petit spots” are a newly discovered subset of sea knolls confined to the bulge of subducting oceanic plates of oceanic plates seaward of deep-sea trenches (Hirano et al., 2006)

Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV

The performance of muon reconstruction, identification, and triggering in CMS has been studied using 40 inverse picobarns of data collected in pp collisions at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection criteria covering a wide range of physics analysis needs have been examined. For all considered selections, the efficiency to reconstruct and identify a muon with a transverse momentum pT larger than a few GeV is above 95% over the whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4, while the probability to misidentify a hadron as a muon is well below 1%. The efficiency to trigger on single muons with pT above a few GeV is higher than 90% over the full eta range, and typically substantially better. The overall momentum scale is measured to a precision of 0.2% with muons from Z decays. The transverse momentum resolution varies from 1% to 6% depending on pseudorapidity for muons with pT below 100 GeV and, using cosmic rays, it is shown to be better than 10% in the central region up to pT = 1 TeV. Observed distributions of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO

An overview of using small punch testing for mechanical characterization of MCrAlY bond coats

Considerable work has been carried out on overlay bond coats in the past several decades because of its excellent oxidation resistance and good adhesion between the top coat and superalloy substrate in the thermal barrier coating systems. Previous studies mainly focus on oxidation and diffusion behavior of these coatings. However, the mechanical behavior and the dominant fracture and deformation mechanisms of the overlay bond coats at different temperatures are still under investigation. Direct comparison between individual studies has not yet been achieved due to the fragmentary data on deposition processes, microstructure and, more apparently, the difficulty in accurately measuring the mechanical properties of thin coatings. One of the miniaturized specimen testing methods, small punch testing, appears to have the potential to provide such mechanical property measurements for thin coatings. The purpose of this paper is to give an overview of using small punch testing to evaluate material properties and to summarize the available mechanical properties that include the ductile-to-brittle transition and creep of MCrAlY bond coat alloys, in an attempt to understand the mechanical behavior of MCrAlY coatings over a broad temperature range

Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV

The performance of muon reconstruction, identification, and triggering in CMS has been studied using 40 inverse picobarns of data collected in pp collisions at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection criteria covering a wide range of physics analysis needs have been examined. For all considered selections, the efficiency to reconstruct and identify a muon with a transverse momentum pT larger than a few GeV is above 95% over the whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4, while the probability to misidentify a hadron as a muon is well below 1%. The efficiency to trigger on single muons with pT above a few GeV is higher than 90% over the full eta range, and typically substantially better. The overall momentum scale is measured to a precision of 0.2% with muons from Z decays. The transverse momentum resolution varies from 1% to 6% depending on pseudorapidity for muons with pT below 100 GeV and, using cosmic rays, it is shown to be better than 10% in the central region up to pT = 1 TeV. Observed distributions of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO

LCA applied to perennial cropping systems: a review focused on the farm stage

International audienc

Diseño de un manual de detección de ansiedad social en adolescentes

Curso de Especial InterésEl objetivo de este trabajo de grado ha sido diseñar un manual dirigido a padres y docentes, en el que se establezcan técnicas de detección de ansiedad social en adolescentes; el diseño de este manual permite un aprendizaje significativo de una forma diferente, en un lenguaje claro y preciso, en formato digital para un fácil acceso y portabilidad del material, logrando de esta forma, que la población adolescente sea beneficiada a través de las acciones que se emprenderán por parte de los padres de familia, docentes y profesionales.142 p.RESUMEN 1. JUSTIFICACIÓN 2. OBJETIVOS 3. ESTUDIO DEL MERCADO 4. PRESENTACIÓN DEL PRODUCTO 5. CLIENTES – SEGMENTACIÓN 6. COMPETENCIA 7. CANALES DE DISTRIBUCIÓN 8. RESULTADOS DEL ESTUDIO DE MERCADO 9. DISCUSIÓN DEL ESTUDIO DE MERCADO 10. PRESUPUESTO 11. RESULTADOS 12. CONCLUSIONES REFERENCIAS APÉNDICESPregradoPsicólog