Tc=21K in epitaxial FeSe0.5Te0.5 thin films with biaxial compressive strain

High purity epitaxial FeSe0.5Te0.5 thin films with different thickness were grown by Pulsed Laser Ablation on different substrates. By varying the film thickness, Tc up to 21K were observed, significantly larger than the bulk value. Structural analyses indicated that the a axis changes significantly with the film thickness and is linearly related to the Tc. The latter result indicates the important role of the compressive strain in enhancing Tc. Tc is also related to both the Fe-(Se,Te) bond length and angle, suggesting the possibility of further enhancement

The influence of Langmuir turbulence on the scaling for the dissipation rate in the oceanic boundary layer

A model for estimating the turbulent kinetic energy dissipation rate in the oceanic boundary layer, based on insights from rapid-distortion theory, is presented and tested. This model provides a possible explanation for the very high dissipation levels found by numerous authors near the surface. It is conceived that turbulence, injected into the water by breaking waves, is subsequently amplified due to its distortion by the mean shear of the wind-induced current and straining by the Stokes drift of surface waves. The partition of the turbulent shear stress into a shear-induced part and a wave-induced part is taken into account. In this picture, dissipation enhancement results from the same mechanism responsible for Langmuir circulations. Apart from a dimensionless depth and an eddy turn-over time, the dimensionless dissipation rate depends on the wave slope and wave age, which may be encapsulated in the turbulent Langmuir number La_t. For large La_t, or any Lat but large depth, the dissipation rate tends to the usual surface layer scaling, whereas when Lat is small, it is strongly enhanced near the surface, growing asymptotically as ɛ ∝ La_t^{-2} when La_t → 0. Results from this model are compared with observations from the WAVES and SWADE data sets, assuming that this is the dominant dissipation mechanism acting in the ocean surface layer and statistical measures of the corresponding fit indicate a substantial improvement over previous theoretical models. Comparisons are also carried out against more recent measurements, showing good order-of-magnitude agreement, even when shallow-water effects are important

Identification of a novel type of spacer element required for imprinting in fission yeast

Asymmetrical segregation of differentiated sister chromatids is thought to be important for cellular differentiation in higher eukaryotes. Similarly, in fission yeast, cellular differentiation involves the asymmetrical segregation of a chromosomal imprint. This imprint has been shown to consist of two ribonucleotides that are incorporated into the DNA during laggingstrand synthesis in response to a replication pause, but the underlying mechanism remains unknown. Here we present key novel discoveries important for unravelling this process. Our data show that cis-acting sequences within the mat1 cassette mediate pausing of replication forks at the proximity of the imprinting site, and the results suggest that this pause dictates specific priming at the position of imprinting in a sequence-independent manner. Also, we identify a novel type of cis-acting spacer region important for the imprinting process that affects where subsequent primers are put down after the replication fork is released from the pause. Thus, our data suggest that the imprint is formed by ligation of a not-fullyprocessed Okazaki fragment to the subsequent fragment. The presented work addresses how differentiated sister chromatids are established during DNA replication through the involvement of replication barriers

Effect of vine vigour of Vitis vinifera cv. Nebbiolo clones on wine acidity and quality

The grapevine cv. Nebbiolo grown in northern Italy produces high-quality red wines, of which Barolo and Barbaresco are the best known. During a clonal selection project, clones of this variety were assessed for their agronomical and enological value. Different degrees of vegetative vigour were found among them, and this was related to modifications of must and wine composition, with particular respect to the acidity. Over 4 years of observations, vigorous clones produced musts and wines of higher pH, regardless of the amount of titratable acidity. This was associated with a higher malic acid content in the juice and with a higher concentration of potassium in the wine. In addition, wines from vigorous clones showed an unbalanced ratio of colour components. They ranked at the lowest score in the sensory evaluation tests

Diamond-Based Thin Film Bulk Acoustic Wave Resonator for Biomedical Applications

Nowadays it is in constant growing the development of thin film bulk acoustic resonators. If the piezoelectric material is going to be implanted in the human body, an important requirement is the biocompatibility of the implant. In this regard, Aluminum Nitride (AlN) has emerged as an attractive alternative for use in biomedical MicroElectroMechanical Systems. Ultrananocrystalline Diamond (UNCD) is a promising material to be used in biomedical applications, due to its extraordinary mulifunctionality; it is exceptional for implantable medical devices requiring stringent biological performance. Since both UNCD and AlN films can be processed via photolithography processes used in microfabrication, the integration of UNCD and AlN films provides the bases for developing a new generation of biocompatible Bio-MEMS/NEMS. Research and development was conducted to produce implantable MEMS devices: Pt/piezoelectric AlN/Pt layer heterostructure was grown and patterned on the UNCD membrane with a Ti adhesion layer. By applying voltages between the top and bottom Pt electrodes layers the piezoelectric AlN layer is energized. The feasibility of the fabrication of biocompatible AlN/diamond-based FBAR structure has been demonstrated.Fil: Zalazar, Martin. Universidad Nacional de Entre Rios. Facultad de Ingenieria. Departamento de Bioingenieria; ArgentinaFil: Guarnieri, Fabio Ariel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico. Centro de Investigación de Métodos Computacionales; Argentina. Universidad Nacional de Entre Rios. Facultad de Ingenieria. Departamento de Bioingenieria; Argentin

Temperature- and doping-dependent nanoscale Schottky barrier height at the Au/Nb:SrTiO3interface

We use ballistic electron emission microscopy to investigate prototypical Au/Nb-doped SrTiO3(NSTO) Schottky barrier diodes for different temperatures and doping levels. To this end, ultrathin Au overlayers are thermally evaporated onto TiO2-terminated NSTO single crystal substrates. We show that at room temperature, regardless of the nominal doping, rectification is controlled by a spatially inhomogeneous Schottky barrier height (SBH), which varies on a length scale of tens of nanometers according to a Gaussian distribution with a mean value of 1.29-1.34 eV and the standard deviation in the range of 80-100 meV. At lower temperatures, however, doping effects become relevant. In particular, junctions with a low Nb content of 0.01 and 0.05 wt. % show an 3c300 meV decrease in the mean SBH from room temperature to 80 K, which can be explained by an electrostatic analysis assuming a temperature-dependent dielectric permittivity for NSTO. In contrast, this model fails to predict the weaker temperature dependence of SBH for junctions based on 0.5 wt. % NSTO. Our nanoscale investigation demands to reassess conventional models for the NSTO polarizability in high-intensity electric fields. Furthermore, it contributes to the comprehension and prediction of transport in metal/SrTiO3junctions and devices

William R. Brinkley:A giant in biomedical research and public policy

Susan A. Gerbi, Robert E. Palazzo, William C. Earnshaw, and William T. Schrader discuss the life and achievements of William R. Brinkley, who passed away on November 10, 2020

U4 snRNA nucleolar localization requires the NHPX/15.5-kD protein binding site but not Sm protein or U6 snRNA association

All small nuclear RNAs (snRNAs) of the [U4/U6.U5] tri-snRNP localize transiently to nucleoli, as visualized by microscopy after injection of fluorescein-labeled transcripts into Xenopus laevis oocyte nuclei. Here, we demonstrate that these RNAs traffic to nucleoli independently of one another, because U4 snRNA deleted in the U6 base-pairing region still localizes to nucleoli. Furthermore, depletion of endogenous U6 snRNA does not affect nucleolar localization of injected U4 or U5. The wild-type U4 transcripts used here are functional: they exhibit normal nucleocytoplasmic traffic, associate with Sm proteins, form the [U4/U6] di-snRNP, and localize to nucleoli and Cajal bodies. The nucleolar localization element (NoLE) of U4 snRNA was mapped by mutagenesis. Neither the 5′-cap nor the 3′-region of U4, which includes the Sm protein binding site, are essential for nucleolar localization. The only region in U4 snRNA required for nucleolar localization is the 5′-proximal stem loop, which contains the binding site for the NHPX/15.5-kD protein. Even mutation of just five nucleotides, essential for binding this protein, impaired U4 nucleolar localization. Intriguingly, the NHPX/15.5-kD protein also binds the nucleolar localization element of box C/D small nucleolar RNAs, suggesting that this protein might mediate nucleolar localization of several small RNAs