A virtual environment for the design and simulated construction of prefabricated buildings

The construction industry has acknowledged that its current working practices are in need of substantial improvements in quality and efficiency and has identified that computer modelling techniques and the use of prefabricated components can help reduce times, costs, and minimise defects and problems of on-site construction. This paper describes a virtual environment to support the design and construction processes of buildings from prefabricated components and the simulation of their construction sequence according to a project schedule. The design environment can import a library of 3-D models of prefabricated modules that can be used to interactively design a building. Using Microsoft Project, the construction schedule of the designed building can be altered, with this information feeding back to the construction simulation environment. Within this environment the order of construction can be visualised using virtual machines. Novel aspects of the system are that it provides a single 3-D environment where the user can construct their design with minimal user interaction through automatic constraint recognition and view the real-time simulation of the construction process within the environment. This takes this area of research a step forward from other systems that only allow the planner to view the construction at certain stages, and do not provide an animated view of the construction process

An affordable, quality-assured community-based system for high-resolution entomological surveillance of vector mosquitoes that reflects human malaria infection risk patterns.

ABSTRACT: BACKGROUND: More sensitive and scalable entomological surveillance tools are required to monitor low levels of transmission that are increasingly common across the tropics, particularly where vector control has been successful. A large-scale larviciding programme in urban Dar es Salaam, Tanzania is supported by a community-based (CB) system for trapping adult mosquito densities to monitor programme performance. Methodology An intensive and extensive CB system for routine, longitudinal, programmatic surveillance of malaria vectors and other mosquitoes using the Ifakara Tent Trap (ITT-C) was developed in Urban Dar es Salaam, Tanzania, and validated by comparison with quality assurance (QA) surveys using either ITT-C or human landing catches (HLC), as well as a cross-sectional survey of malaria parasite prevalence in the same housing compounds. RESULTS: Community-based ITT-C had much lower sensitivity per person-night of sampling than HLC (Relative Rate (RR) [95% Confidence Interval (CI)] = 0.079 [0.051, 0.121], P < 0.001 for Anopheles gambiae s.l. and 0.153 [0.137, 0.171], P < 0.001 for Culicines) but only moderately differed from QA surveys with the same trap (0.536 [0.406,0.617], P = 0.001 and 0.747 [0.677,0.824], P < 0.001, for An. gambiae or Culex respectively). Despite the poor sensitivity of the ITT per night of sampling, when CB-ITT was compared with QA-HLC, it proved at least comparably sensitive in absolute terms (171 versus 169 primary vectors caught) and cost-effective (153US$versus 187US$ per An. gambiae caught) because it allowed more spatially extensive and temporally intensive sampling (4284 versus 335 trap nights distributed over 615 versus 240 locations with a mean number of samples per year of 143 versus 141). Despite the very low vectors densities (Annual estimate of about 170 An gambiae s.l bites per person per year), CB-ITT was the only entomological predictor of parasite infection risk (Odds Ratio [95% CI] = 4.43[3.027,7. 454] per An. gambiae or Anopheles funestus caught per night, P =0.0373). Discussion and conclusion CB trapping approaches could be improved with more sensitive traps, but already offer a practical, safe and affordable system for routine programmatic mosquito surveillance and clusters could be distributed across entire countries by adapting the sample submission and quality assurance procedures accordingly

Entomological Surveillance of Behavioural Resilience and Resistance in Residual Malaria Vector Populations.

The most potent malaria vectors rely heavily upon human blood so they are vulnerable to attack with insecticide-treated nets (ITNs) and indoor residual spraying (IRS) within houses. Mosquito taxa that can avoid feeding or resting indoors, or by obtaining blood from animals, mediate a growing proportion of the dwindling transmission that persists as ITNs and IRS are scaled up. Increasing frequency of behavioural evasion traits within persisting residual vector systems usually reflect the successful suppression of the most potent and vulnerable vector taxa by IRS or ITNs, rather than their failure. Many of the commonly observed changes in mosquito behavioural patterns following intervention scale-up may well be explained by modified taxonomic composition and expression of phenotypically plastic behavioural preferences, rather than altered innate preferences of individuals or populations. Detailed review of the contemporary evidence base does not yet provide any clear-cut example of true behavioural resistance and is, therefore, consistent with the hypothesis presented. Caution should be exercised before over-interpreting most existing reports of increased frequency of behavioural traits which enable mosquitoes to evade fatal contact with insecticides: this may simply be the result of suppressing the most behaviourally vulnerable of the vector taxa that constituted the original transmission system. Mosquito taxa which have always exhibited such evasive traits may be more accurately described as behaviourally resilient, rather than resistant. Ongoing national or regional entomological monitoring surveys of physiological susceptibility to insecticides should be supplemented with biologically and epidemiologically meaningfully estimates of malaria vector population dynamics and the behavioural phenotypes that determine intervention impact, in order to design, select, evaluate and optimize the implementation of vector control measures

The influence of farmers' mental models on an agroforestry extension program in the Philippines

The influence of farmers' mental models on the success of an agroforestry extension program on Leyte Island in the Philippines was investigated. Knowledge of farmers' mental models and hence the likely acceptance of technology was used to inform the design of a hypothetically expanded program. To gain an insight into the reasons behind differing acceptance of extension assistance, data were collected and analysed from formal interviews, translated conversations and visual observations. The data provided a chain of evidence and triangulation between farmers' stated intentions and their actions. Farmers had little prior knowledge of nursery technology and were highly receptive to extension assistance which enabled them to develop high self-efficacy in seedling production. However, farmers' rejection of silvicultural advice to thin and prune existing plantations was predicated by existing attitudes to forest resource management. Farmers also expressed a strong preference for a low-cost and low-input approach to establishing timber trees. Visual observations of farmers' tree establishment practices indicated the existence of gaps in their knowledge of tree growth processes. This investigation illustrates the need to elicit farmers' mental models as a parallel enquiry to extension activities. If agroforestry extension is to be constructivist and participatory, accommodation of farmers' mental models and modification of program goals may be necessary. Relatively little is known about the reasons for farmers' acceptance or rejection of silviculture in Leyte and these results indicate that further research into the way that farmers' mental models filter and guide acceptance of advice may be worthwhile

Protocol for the Foot in Juvenile Idiopathic Arthritis trial (FiJIA): a randomised controlled trial of an integrated foot care programme for foot problems in JIA

&lt;b&gt;Background&lt;/b&gt;: Foot and ankle problems are a common but relatively neglected manifestation of juvenile idiopathic arthritis. Studies of medical and non-medical interventions have shown that clinical outcome measures can be improved. However existing data has been drawn from small non-randomised clinical studies of single interventions that appear to under-represent the adult population suffering from juvenile idiopathic arthritis. To date, no evidence of combined therapies or integrated care for juvenile idiopathic arthritis patients with foot and ankle problems exists. &lt;b&gt;Methods/design&lt;/b&gt;: An exploratory phase II non-pharmacological randomised controlled trial where patients including young children, adolescents and adults with juvenile idiopathic arthritis and associated foot/ankle problems will be randomised to receive integrated podiatric care via a new foot care programme, or to receive standard podiatry care. Sixty patients (30 in each arm) including children, adolescents and adults diagnosed with juvenile idiopathic arthritis who satisfy the inclusion and exclusion criteria will be recruited from 2 outpatient centres of paediatric and adult rheumatology respectively. Participants will be randomised by process of minimisation using the Minim software package. The primary outcome measure is the foot related impairment measured by the Juvenile Arthritis Disability Index questionnaire's impairment domain at 6 and 12 months, with secondary outcomes including disease activity score, foot deformity score, active/limited foot joint counts, spatio-temporal and plantar-pressure gait parameters, health related quality of life and semi-quantitative ultrasonography score for inflammatory foot lesions. The new foot care programme will comprise rapid assessment and investigation, targeted treatment, with detailed outcome assessment and follow-up at minimum intervals of 3 months. Data will be collected at baseline, 6 months and 12 months from baseline. Intention to treat data analysis will be conducted. A full health economic evaluation will be conducted alongside the trial and will evaluate the cost effectiveness of the intervention. This will consider the cost per improvement in Juvenile Arthritis Disability Index, and cost per quality adjusted life year gained. In addition, a discrete choice experiment will elicit willingness to pay values and a cost benefit analysis will also be undertaken

The development and piloting of the graduate assessment of preparedness for practice (GAPP) questionnaire

Introduction Most new dental graduates in the UK begin their professional career following a year in dental foundation training (DFT). There has been little investigation of how prepared they feel for independent general dental practice across all four domains of the General Dental Council’s curriculum ‘Preparing for practice’. This paper describes the development of the Graduate Assessment of Preparedness for Practice (GAPP) questionnaire to address this. Methodology The GAPP questionnaire was developed and piloted using a cohort of educational supervisors (ESs) and foundation dentists (FDs). The questionnaire comprised three parts, the first of which collected respondent demographic data. The second was based on Preparing for practice and was used to develop 34 ‘competence areas’ and required a tick-box response on a 7‑category Likert Scale. The third comprised free text questions in order to further explore the subject’s responses. Results Pilot feedback was positive, the statements were felt to be clear and unambiguous, allowing them sufficient scope to state their position. The pilot study informed small cosmetic changes to the GAPP questionnaire and inclusion of a ‘comments’ column for respondents to qualify their responses. The pilot results indicated that both FDs and their ESs felt that at ten months of DFT, the FDs were very well prepared for independent general dental practice. Discussion The paper describes the important considerations relating to the reliability and validity of the GAPP questionnaire. Conclusions GAPP appears to be a suitable questionnaire to measure preparedness of new graduates with a degree of reliability and validity. The instrument is designed to be simple to complete and provides a useful analytical instrument for both self-assessment of competence and for wider use within dental education

Is group cognitive behaviour therapy for postnatal depression evidence-based practice? A systematic review

Background: There is evidence that psychological therapies including cognitive behaviour therapy (CBT) may be effective in reducing postnatal depression (PND) when offered to individuals. In clinical practice, this is also implemented in a group therapy format, which, although not recommended in guidelines, is seen as a cost-effective alternative. To consider the extent to which group methods can be seen as evidence-based, we systematically review and synthesise the evidence for the efficacy of group CBT compared to currently used packages of care for women with PND, and we discuss further factors which may contribute to clinician confidence in implementing an intervention. Methods: Seventeen electronic databases were searched. All full papers were read by two reviewers and a third reviewer was consulted in the event of a disagreement on inclusion. Selected studies were quality assessed, using the Cochrane Risk of Bias Tool, were data extracted by two reviewers using a standardised data extraction form and statistically synthesised where appropriate using the fixed-effect inverse-variance method. Results: Seven studies met the inclusion criteria. Meta-analyses showed group CBT to be effective in reducing depression compared to routine primary care, usual care or waiting list groups. A pooled effect size of d = 0.57 (95% CI 0.34 to 0.80, p < 0.001) was observed at 10–13 weeks post-randomisation, reducing to d = 0.28 (95% CI 0.03 to 0.53, p = 0.025) at 6 months. The non-randomised comparisons against waiting list controls at 10–13 weeks was associated with a larger effect size of d = 0.94 (95% CI 0.42 to 1.47, p < 0.001). However due to the limitations of the available data, such as ill-specified definitions of the CBT component of the group programmes, these results should be interpreted with caution. Conclusions: Although the evidence available is limited, group CBT was shown to be effective. We argue, therefore, that there is sufficient evidence to implement group CBT, conditional upon routinely collected outcomes being benchmarked against those obtained in trials of individual CBT, and with other important factors such as patient preference, clinical experience, and information from the local context taken into account when making the treatment decision

Molecular and cellular mechanisms underlying the evolution of form and function in the amniote jaw.

The amniote jaw complex is a remarkable amalgamation of derivatives from distinct embryonic cell lineages. During development, the cells in these lineages experience concerted movements, migrations, and signaling interactions that take them from their initial origins to their final destinations and imbue their derivatives with aspects of form including their axial orientation, anatomical identity, size, and shape. Perturbations along the way can produce defects and disease, but also generate the variation necessary for jaw evolution and adaptation. We focus on molecular and cellular mechanisms that regulate form in the amniote jaw complex, and that enable structural and functional integration. Special emphasis is placed on the role of cranial neural crest mesenchyme (NCM) during the species-specific patterning of bone, cartilage, tendon, muscle, and other jaw tissues. We also address the effects of biomechanical forces during jaw development and discuss ways in which certain molecular and cellular responses add adaptive and evolutionary plasticity to jaw morphology. Overall, we highlight how variation in molecular and cellular programs can promote the phenomenal diversity and functional morphology achieved during amniote jaw evolution or lead to the range of jaw defects and disease that affect the human condition

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal