84 research outputs found
Water dispersible microbicidal cellulose acetate phthalate film
BACKGROUND: Cellulose acetate phthalate (CAP) has been used for several decades in the pharmaceutical industry for enteric film coating of oral tablets and capsules. Micronized CAP, available commercially as "Aquateric" and containing additional ingredients required for micronization, used for tablet coating from water dispersions, was shown to adsorb and inactivate the human immunodeficiency virus (HIV-1), herpesviruses (HSV) and other sexually transmitted disease (STD) pathogens. Earlier studies indicate that a gel formulation of micronized CAP has a potential as a topical microbicide for prevention of STDs including the acquired immunodeficiency syndrome (AIDS). The objective of endeavors described here was to develop a water dispersible CAP film amenable to inexpensive industrial mass production. METHODS: CAP and hydroxypropyl cellulose (HPC) were dissolved in different organic solvent mixtures, poured into dishes, and the solvents evaporated. Graded quantities of a resulting selected film were mixed for 5 min at 37°C with HIV-1, HSV and other STD pathogens, respectively. Residual infectivity of the treated viruses and bacteria was determined. RESULTS: The prerequisites for producing CAP films which are soft, flexible and dispersible in water, resulting in smooth gels, are combining CAP with HPC (other cellulose derivatives are unsuitable), and casting from organic solvent mixtures containing ≈50 to ≈65% ethanol (EtOH). The films are ≈100 µ thick and have a textured surface with alternating protrusions and depressions revealed by scanning electron microscopy. The films, before complete conversion into a gel, rapidly inactivated HIV-1 and HSV and reduced the infectivity of non-viral STD pathogens >1,000-fold. CONCLUSIONS: Soft pliable CAP-HPC composite films can be generated by casting from organic solvent mixtures containing EtOH. The films rapidly reduce the infectivity of several STD pathogens, including HIV-1. They are converted into gels and thus do not have to be removed following application and use. In addition to their potential as topical microbicides, the films have promise for mucosal delivery of pharmaceuticals other than CAP
Association between renin and atherosclerotic burden in subjects with and without type 2 diabetes.
Published onlineJournal ArticleThis is the final version of the article. Available from BioMed Central via the DOI in this record.BACKGROUND: Activation of the renin-angiotensin-aldosterone-system (RAAS) has been proposed to contribute to development of vascular complications in type 2 diabetes (T2D). The aim of the present study was to determine if plasma renin levels are associated with the severity of vascular changes in subjects with and without T2D. METHODS: Renin was analyzed by the Proximity Extension Assay in subjects with (n = 985) and without (n = 515) T2D participating in the SUMMIT (SUrrogate markers for Micro- and Macro-vascular hard endpoints for Innovative diabetes Tools) study and in 205 carotid endarterectomy patients. Vascular changes were assessed by determining ankle-brachial pressure index (ABPI), carotid intima-media thickness (IMT), carotid plaque area, pulse wave velocity (PWV) and the reactivity hyperemia index (RHI). RESULTS: Plasma renin was elevated in subjects with T2D and demonstrated risk factor-independent association with prevalent cardiovascular disease both in subjects with and without T2D. Renin levels increased with age, body mass index, HbA1c and correlated inversely with HDL. Subjects with T2D had more severe carotid disease, increased arterial stiffness, and impaired endothelial function. Risk factor-independent associations between renin and APBI, bulb IMT, carotid plaque area were observed in both T2D and non-T2D subjects. These associations were independent of treatment with RAAS inhibitors. Only weak associations existed between plasma renin and the expression of pro-inflammatory and fibrous components in plaques from 205 endarterectomy patients. CONCLUSIONS: Our findings provide clinical evidence for associations between systemic RAAS activation and atherosclerotic burden and suggest that this association is of particular importance in T2D.Innovative Medicines Initiative (the SUMMIT consortium, IMI-2008/115006, the Swedish Heart-Lung Foundation, the Swedish Research Council and Marianne and Marcus Wallenberg Foundation)
Internally coupled ears in living mammals.
It is generally held that the right and left middle ears of mammals are acoustically isolated from each other, such that mammals must rely on neural computation to derive sound localisation cues. There are, however, some unusual species in which the middle ear cavities intercommunicate, in which case each ear might be able to act as a pressure-difference receiver. This could improve sound localisation at lower frequencies. The platypus Ornithorhynchus is apparently unique among mammals in that its tympanic cavities are widely open to the pharynx, a morphology resembling that of some non-mammalian tetrapods. The right and left middle ear cavities of certain talpid and golden moles are connected through air passages within the basicranium; one experimental study on Talpa has shown that the middle ears are indeed acoustically coupled by these means. Having a basisphenoid component to the middle ear cavity walls could be an important prerequisite for the development of this form of interaural communication. Little is known about the hearing abilities of platypus, talpid and golden moles, but their audition may well be limited to relatively low frequencies. If so, these mammals could, in principle, benefit from the sound localisation cues available to them through internally coupled ears. Whether or not they actually do remains to be established experimentally.This is the final version of the article. It first appeared from Springer via http://dx.doi.org/10.1007/s00422-015-0675-
Multiple dosing strategies with acetyl L-carnitine (ALCAR) fail to alter age-related hearing loss in the Fischer 344/NHsd rat
Maximum occlusal force and medial mandibular flexure in relation to vertical facial pattern: a cross-sectional study
BACKGROUND: Vertical facial pattern may be related to the direction of pull of the masticatory muscles, yet its effect on occlusal force and elastic deformation of the mandible still is unclear. This study tested whether the variation in vertical facial pattern is related to the variation in maximum occlusal force (MOF) and medial mandibular flexure (MMF) in 51 fully-dentate adults. METHODS: Data from cephalometric analysis according to the method of Ricketts were used to divide the subjects into three groups: Dolichofacial (n = 6), Mesofacial (n = 10) and Brachyfacial (n = 35). Bilateral MOF was measured using a cross-arch force transducer placed in the first molar region. For MMF, impressions of the mandibular occlusal surface were made in rest (R) and in maximum opening (O) positions. The impressions were scanned, and reference points were selected on the occlusal surface of the contralateral first molars. MMF was calculated by subtracting the intermolar distance in O from the intermolar distance in R. Data were analysed by ANCOVA (fixed factors: facial pattern, sex; covariate: body mass index (BMI); alpha = 0.05). RESULTS: No significant difference of MOF or MMF was found among the three facial patterns (P = 0.62 and P = 0.72, respectively). BMI was not a significant covariate for MOF or MMF (P > 0.05). Sex was a significant factor only for MOF (P = 0.007); males had higher MOF values than females. CONCLUSION: These results suggest that MOF and MMF did not vary as a function of vertical facial pattern in this Brazilian sample
Lawson criterion for ignition exceeded in an inertial fusion experiment
For more than half a century, researchers around the world have been engaged in attempts to achieve fusion ignition as a proof of principle of various fusion concepts. Following the Lawson criterion, an ignited plasma is one where the fusion heating power is high enough to overcome all the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop with rapidly increasing temperature. In inertially confined fusion, ignition is a state where the fusion plasma can begin "burn propagation" into surrounding cold fuel, enabling the possibility of high energy gain. While "scientific breakeven" (i.e., unity target gain) has not yet been achieved (here target gain is 0.72, 1.37 MJ of fusion for 1.92 MJ of laser energy), this Letter reports the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce capsule gain (here 5.8) and reach ignition by nine different formulations of the Lawson criterion
Capacity shortfalls hinder the performance of marine protected areas globally
Marine protected areas (MPAs) are increasingly being used globally to conserve marine resources. However, whether many MPAs are being effectively and equitably managed, and how MPA management influences substantive outcomes remain unknown. We developed a global database of management and fish population data (433 and 218 MPAs, respectively) to assess: MPA management processes; the effects of MPAs on fish populations; and relationships between management processes and ecological effects. Here we report that many MPAs failed to meet thresholds for effective and equitable management processes, with widespread shortfalls in staff and financial resources. Although 71% of MPAs positively influenced fish populations, these conservation impacts were highly variable. Staff and budget capacity were the strongest predictors of conservation impact: MPAs with adequate staff capacity had ecological effects 2.9 times greater than MPAs with inadequate capacity. Thus, continued global expansion of MPAs without adequate investment in human and financial capacity is likely to lead to sub-optimal conservation outcomes
BioTIME 2.0: Expanding and Improving a Database of Biodiversity Time Series
Motivation Here, we make available a second version of the BioTIME database, which compiles records of abundance estimates for species in sample events of ecological assemblages through time. The updated version expands version 1.0 of the database by doubling the number of studies and includes substantial additional curation to the taxonomic accuracy of the records, as well as the metadata. Moreover, we now provide an R package (BioTIMEr) to facilitate use of the database. Main Types of Variables Included The database is composed of one main data table containing the abundance records and 11 metadata tables. The data are organised in a hierarchy of scales where 11,989,233 records are nested in 1,603,067 sample events, from 553,253 sampling locations, which are nested in 708 studies. A study is defined as a sampling methodology applied to an assemblage for a minimum of 2 years. Spatial Location and Grain Sampling locations in BioTIME are distributed across the planet, including marine, terrestrial and freshwater realms. Spatial grain size and extent vary across studies depending on sampling methodology. We recommend gridding of sampling locations into areas of consistent size. Time Period and Grain The earliest time series in BioTIME start in 1874, and the most recent records are from 2023. Temporal grain and duration vary across studies. We recommend doing sample-level rarefaction to ensure consistent sampling effort through time before calculating any diversity metric. Major Taxa and Level of Measurement The database includes any eukaryotic taxa, with a combined total of 56,400 taxa. Software Format csv and. SQL
- …
