Negative and Nonlinear Response in an Exactly Solved Dynamical Model of Particle Transport

We consider a simple model of particle transport on the line defined by a dynamical map F satisfying F(x+1) = 1 + F(x) for all x in R and F(x) = ax + b for |x| < 0.5. Its two parameters a (`slope') and b (`bias') are respectively symmetric and antisymmetric under reflection x -> R(x) = -x. Restricting ourselves to the chaotic regime |a| > 1 and therein mainly to the part a>1 we study not only the `diffusion coefficient' D(a,b), but also the `current' J(a,b). An important tool for such a study are the exact expressions for J and D as obtained recently by one of the authors. These expressions allow for a quite efficient numerical implementation, which is important, because the functions encountered typically have a fractal character. The main results are presented in several plots of these functions J(a,b) and D(a,b) and in an over-all `chart' displaying, in the parameter plane, all possibly relevant information on the system including, e.g., the dynamical phase diagram as well as invariants such as the values of topological invariants (kneading numbers) which, according to the formulas, determine the singularity structure of J and D. Our most significant findings are: 1) `Nonlinear Response': The parameter dependence of these transport properties is, throughout the `ergodic' part of the parameter plane (i.e. outside the infinitely many Arnol'd tongues) fractally nonlinear. 2) `Negative Response': Inside certain regions with an apparently fractal boundary the current J and the bias b have opposite signs.Comment: corrected typos and minor reformulations; 28 pages (revtex) with 7 figures (postscript); accepted for publication in JS

SLIP: 10 years ago and 10 years from now

Founded in 1999, the ACM SLIP Workshop is now in its 12th year. The 2010 SLIP Panel session will highlight perspectives from three individuals who have had great influence on the course of SLIP, and provide an opportunity for lively discussion by workshop attendees of prospects for the next 10 years of SLIP. This panel summary records preliminary thoughts of the panelists on two starting questions

Patterns of transition. Female native Dutch and ethnic minority employment patterns in the Dutch labour market, 1991 and 2002

This study analyses female native Dutch and ethnic minority employment patterns in the Dutch labour market. Focusing on life-course employment patterns, it aims to find out if native Dutch and ethnic minority women in the Netherlands have undergone a transition towards more labour market participation between 1991 and 2002. Three patterns of change in employment integration by age can be discerned. First, increasing employment levels for native Dutch women of almost all age groups, but in particular for those age groups that have to combine employment with rearing children. Second, a high employment level for Surinamese and Antillean women, revealing strong employment integration of all age groups, so that combining market work and rearing children does not hamper labour market integration. Third, a more traditional pattern for Turkish and Moroccan women, yet indicating an increased employment rate for almost all age groups, in particular 20-24 years. We find that critical life events such as motherhood have different effects on employment for Mediterranean, Caribbean and native Dutch women. In addition, the analysis shows that the attachment of both native Dutch and ethnic minority women to the labour market becomes stronger, and the influence of motherhood becomes smaller, over time. All in all, Caribbean women are the most attached to the labour market. © 2006 Taylor & Francis

Study to minimize hydrogen embrittlement of ultrahigh-strength steels

Hydrogen-stress cracking in high-strength steels is influenced by hydrogen content of the material and its hydrogen absorption tendency. Non-embrittling cleaning, pickling, and electroplating processes are being studied. Protection from this hydrogen embrittlement is important to the aerospace and aircraft industries

Comb-drive actuators for large displacements

The design, fabrication and experimental results of lateral-comb-drive actuators for large displacements at low driving voltages is presented. A comparison of several suspension designs is given, and the lateral large deflection behaviour of clamped - clamped beams and a folded flexure design is modelled. An expression for the axial spring constant of folded flexure designs including bending effects from lateral displacements, which reduce the axial stiffness, is also derived. The maximum deflection that can be obtained by comb-drive actuators is bounded by electromechanical side instability. Expressions for the side-instability voltage and the resulting displacement at side instability are given. The electromechanical behaviour around the resonance frequency is described by an equivalent electric circuit. Devices are fabricated by polysilicon surface micromachining techniques using a one-mask fabrication process. Static and dynamic properties are determined experimentally and are compared with theory. Static properties are determined by displacement-to-voltage, capacitance-to-voltage and pull-in voltage measurements. Using a one-port approach, dynamic properties are extracted from measured admittance plots. Typical actuator characteristics are deflections of about at driving voltages around 20 V, a resonance frequency around 1.6 kHz and a quality factor of approximately 3

Escapement of the Cape rock lobster (Jasus lalandii ) through the mesh and entrance of commercial traps

Metal-framed traps covered with polyethylene mesh used in the fishery for the South African Cape rock lobster (Jasus lalandii) incidentally capture large numbers of undersize (<75 mm CL) specimens. Air-exposure, handling, and release procedures affect captured rock lobsters and reduce the productivity of the stock, which is heavily fished. Optimally, traps should retain legalsize rock lobsters and allow sublegal animals to escape before traps are hauled. Escapement, based on lobster morphometric measurements, through meshes of 62 mm, 75 mm, and 100 mm was investigated theoretically under controlled conditions in an aquarium, and during field trials. SELECT models were used to model escapement, wherever appropriate. Size-selectivity curves based on the logistic model fitted the aquarium and field data better than asymmetrical Richards curves. The lobster length at 50% retention (L50) on the escapement curve for 100-mm mesh in the aquarium (75.5 mm CL) approximated the minimum legal size (75 mm CL); however estimates of L50 increased to 77.4 mm in field trials where trapentrances were sealed, and to 82.2 mm where trap-entrances were open. Therfore, rock lobsters that cannot escape through the mesh of sealed field traps do so through the trap entrance of open traps. By contrast, the wider selection range and lower L25 of field, compared to aquarium, trials (SR = 8.2 mm vs. 2.6 mm; L25 =73.4 mm vs. 74.1 mm), indicate that small lobsters that should be able to escape from 100-mm mesh traps do not always do so. Escapement from 62-mm mesh traps with open entrance funnels increased by 40−60% over sealed traps. The findings of this study with a known size distribution, are related to those of a recent indirect (comparative) study for the same species, and implications for trap surveys, commercial catch rates, and ghost fishing are discussed

MolabIS - An integrated information system for storing and managing molecular genetics data

BACKGROUND: Long-term sample storage, tracing of data flow and data export for subsequent analyses are of great importance in genetics studies. Therefore, molecular labs do need a proper information system to handle an increasing amount of data from different projects. RESULTS: We have developed a molecular labs information management system (MolabIS). It was implemented as a web-based system allowing the users to capture original data at each step of their workflow. MolabIS provides essential functionality for managing information on individuals, tracking samples and storage locations, capturing raw files, importing final data from external files, searching results, accessing and modifying data. Further important features are options to generate ready-to-print reports and convert sequence and microsatellite data into various data formats, which can be used as input files in subsequent analyses. Moreover, MolabIS also provides a tool for data migration. CONCLUSIONS: MolabIS is designed for small-to-medium sized labs conducting Sanger sequencing and microsatellite genotyping to store and efficiently handle a relative large amount of data. MolabIS not only helps to avoid time consuming tasks but also ensures the availability of data for further analyses. The software is packaged as a virtual appliance which can run on different platforms (e.g. Linux, Windows). MolabIS can be distributed to a wide range of molecular genetics labs since it was developed according to a general data model. Released under GPL, MolabIS is freely available at http://www.molabis.org

A review of the literature on pickling inhibitors and cadmium electroplating processes to minimize hydrogen absorption by ultrahigh-strength steels

Literature review on pickling inhibitors and cadmium electroplating processes to minimize hydrogen absorption by ultrahigh strength steel

A review of the literature on cleaning, pickling, and electroplating processes and relief treatments to minimize hydrogen embrittlement of ultrahigh-strength steels Special report

Cleaning, pickling, and electroplating processes to minimize hydrogen embrittlement of ultrahigh strength steel

A study of hydrogen embrittlement of various alloys Annual summary report, 24 Jun. 1965 - 23 Jun. 1966

Hydrogen embrittlement of alloy cathodically charged and notched tensile metal