Electrodialytic Recovery of Cobalt from Spent Lithium-Ion Batteries

Contribución en congreso científicoRecycling lithium-ion batteries has an increasing interest for economic and environmental reasons. Disposal of lithium-ion batteries imposes high risk to the environment due to the toxicity of some of their essential components. In addition to this, some of these components, such as cobalt, natural graphite and phosphorus, are included in the list of critical raw materials for the European Union due to their strategic importance in the manufacturing industry. Therefore, in the recent years, numerous research studies have been focused on the development of efficient processes for battery recycling and the selective recuperation of these key components. LiCoO2 is the most common material use in current lithium-ion batteries cathodes. In the current work, an electrodialytic method is proposed for the recovery of cobalt from this kind of electrode. In a standard electrodialytic cell, the treated matrix is separated from the anode and the cathode compartments by means of ion-exchange membranes. A cation-exchange membrane (CEM) allows the passage of cations and hinders the passage of anions, while the behaviour of anion-exchange membrane (AEM) does the opposite. A three-compartment electrodialytic cell has been designed and assembled, as depicted in the figure. In the central compartment, a suspension of LiCoO2 is added. Different extracting agents, such as EDTA, HCl and HNO3, are tested to enhanced the dissolution and the selective extraction of the target metal. Dissolved cobalt-containing complexes migrate towards the cathode or the anode compartments depending on the ionic charge of the complexes. While cobalt extraction via extracting agents is an expensive treatment, as it requires the constant addition of chemicals, an efficient electrodialytic cell could allow the recirculation of the extracting agents and the economical optimization of the process.This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778045. Paz-Garcia acknowledges the financial support from the University of Malaga, project: PPIT.UMA.B5.2018/17. Villen-Guzman acknowledges the funding from the University of Malaga for the postdoctoral fellowship PPIT.UMA.A.3.2.2018. Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec

New Perspectives for Electrodialytic Remediation

Electrodialytic remediation has been widely used for the recovery of different contaminants from numerous matrices, such as, for example, polluted soils, wastewater sludge, fly ash, mine tailing or harbour sediments. The electrodialytic remediation is an enhancement of the electrokinetic remediation technique, and it consists of the use of ion-exchange membranes for the control of the acid and the alkaline fronts generated in the electrochemical processes. While the standard electrodialytic cell is usually built with three-compartment configuration, it has been shown that for the remediation of matrices that require acid environment, a two-compartment cell has given satisfactory removal efficiencies with reduced energy costs. Recycling secondary batteries, with growing demand, has an increasing economic and environmental interest. This work focusses on the proposal of the electrodialytic remediation technique as a possible application for the recycling of lithium-ion cells and other secondary batteries. The recovery of valuable components, such as lithium, manganese, cobalt of phosphorous, based on current recycling processes and the characterization of solid waste is addressed.This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778045. Paz-Garcia acknowledges the financial support from the University of Malaga, project: PPIT.UMA.B5.2018/17. Villen-Guzman acknowledges the funding from the University of Malaga for the postdoctoral fellowship PPIT.UMA.A.3.2.2018. Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec

Electrodialytic Treatment of Secondary Batteries Cathodes

The interest for reusing and recycling secondary batteries is increasing, driven by both economic and environmental reasons. Lithium-ion batteries are among the main energy storage devices more popular in portable electronic and there are being used more every year in the field of electric transportation. The growing demand for rechargeable batteries entails an increase in the attention paid to the recycling of spent batteries due to the toxicity of some of their essential components. Furthermore, some of these components, such as cobalt, natural graphite and phosphorus, are included in the list of critical raw materials for the European Union due to their strategic importance in the manufacturing industry. Therefore, the development of new technologies to selectively recover these key components should be addressed. In this work, an electrodialytic method is applied to real battery wastes previously submitted to a pre-treatment process (Figure 1). We focused on the extraction of Co and Li from spent cathodes, in combination with acid-extraction and different oxidation/reduction environments. The optimization of some of the most relevant operating parameters, such as cell design, selection of enhancing agent and current density has been carried out according to the lithium-ion batteries waste characteristic. Results indicate that the electrodialytic method could be a useful technique for the selective extraction of Li and Co from spent batteries. Furthermore, the deposition of Co at the cathode surface may be optimized to separate the cations at the catholyte, for a direct reincorporation in the manufacturing chain.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. The authors acknowledge the financial support from the "Plan Propio de Investigación de la Universidad de Málaga" with project numbers, PPIT.UMA.D1, PPIT.UMA.B1.2017/20 and PPIT.UMA.B5.2018/17. This work has also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778045

Modeling of Electrodialytic Treatment of Lithium-Ion Batteries

Lithium-ion batteries are currently present in most portable electronic devices and their use is rapidly growing in the field of electric vehicles and renewable energy storage. Many components in lithium-ion batteries are toxic and/or environmentally hazardous. Furthermore, some of them are expensive and listed as critical materials in terms of supply-chain risk. Therefore, the need to improve the recycling techniques for lithium-ion batteries is becoming a priority. Herein, we describe and present a model for the electrodialytic treatment of disposed lithium-ion batteries. Electrodialysis is a separation process based on the use of electric fields and ion-selective membranes. The electrodialytic cell can be designed in different configurations, to enhance the selective extraction of the target products. In a standard electrodialytic cell, the treated matrix is separated from the anode and the cathode compartments by means of anion- and cation-exchange membranes respectively. However, depending on the ionic charge and the specific chemistry of the matrix, different cell designs can be used. In the present work, different possible configurations are explored for the optimization of the extraction of key valuable components from spent lithium-ion batteries, taking into account the chemical properties of the system depending on the chosen extracting agent and cell configuration. The model presented here is based on a set of differential and algebraic equations consisting of a Nernst-Planck based continuity equations for each of the chemical species involved in the process, coupled with the electroneutrality and the local chemical equilibrium conditions. The numerical solution is performed using COMSOL Multiphysics, and the simulation results are compared with experimental data for model validation.This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778045. Paz-Garcia acknowledges the financial support from the University of Malaga, project: PPIT.UMA.B5.2018/17. Villen-Guzman acknowledges the funding from the University of Malaga for the postdoctoral fellowship PPIT.UMA.A.3.2.2018. Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec

Improving Cr (VI) Extraction through Electrodialysis

A laboratory study has been carried out to determine the feasibility of in situ remediation of chromium (VI) contaminated soil using electrodialysis. In a classic setup, this technique implies the application of a low intensity direct current to the soil, which is separated from the electrode compartments by ion-exchange membranes. If the pollutants are ionic compounds, they can be forced to migrate to the oppositely charged electrode by electro-migration. Membranes selectively impede the flow of ions in the electrode compartments back to the soil. If a metal species is naturally present as an anion, mobilization from the soil at alkaline pH can be realized and, at the same time, the mobilization of other metal cations that occur at low pH can be minimized. Experiments have been carried out with clayey soils (kaolinite clay and soil clay mixtures) that have been characterized and then contaminated by mixing with a potassium dichromate solution for several days. Initial Cr (VI) content ranges from 500 to 4000 mg/kg. Treatment tests were carried out in an acrylic laboratory cells consisting of a central soil compartment and two electrode compartments located at both ends of the column. Dimensionally stable titanium electrodes coated with mixed metal oxides were placed in the electrode compartments. 0.01M Na2SO4 electrolytes were recirculated through them from two 1-liter deposits using a peristaltic pump. Two commercial ion exchange membranes separated the anolyte and catholyte compartments from the soil in the standard configuration. A programmable DC: power supply was connected to the electrodes and a computer for data acquisition.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. The authors acknowledge the financial support from the "Plan Propio de Investigación de la Universidad de Málaga" with project numbers PPIT.UMA.D1; PPIT.UMA.B1.2017/20 and PPIT.UMA.B5.2018/17. This work has also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778045

A Model for Electrodialytic Treatment of Lithium-Ion Batteries

New recycling processes for secondary batteries are needed to achieve sustainable use of natural resources. Indeed, many components in lithium ion batteries, such as cobalt and graphite, are in the European Union’s “Critical Raw Materials” list. Electrodialytic treatment of disposed lithium-ion batteries is a pioneer proposal for the selective recovery of some of these relevant elements. In this work, a model for the electrochemical technology of disposed batteries implemented using COMSOL Multiphysics is presented. The main aim of this model is the optimization of the extraction of valuable components from spent batteries and the prediction of experimental results, which entails a better understanding of the different process involved. The model is based on the Nernst-Planck- Poisson system of equations coupled with the local chemical equilibrium conditions. The model uses multi-scale discretization of the different components; including the assumed well-stirred compartments, the ion-exchange membranes and the diffuse double-layer at the surface of the membranes. Different cell configuration has been tested, and results were compared to experimental data for model validation.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. The authors acknowledge the financial support from the "Plan Propio de Investigación de la Universidad de Málaga" with project numbers PPIT.UMA.D1, PPIT.UMA.B1.2017/20 and PPIT.UMA.B5.2018/17. This work has also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778045

Longitudinal functional connectivity changes related to dopaminergic decline in Parkinson’s disease

Background: Resting-state functional magnetic resonance imaging (fMRI) studies have demonstrated that basal ganglia functional connectivity is altered in Parkinson’s disease (PD) as compared to healthy controls. However, such functional connectivity alterations have not been related to the dopaminergic deficits that occurs in PD over time. Objectives: To examine whether functional connectivity impairments are correlated with dopaminergic deficits across basal ganglia subdivisions in patients with PD both cross-sectionally and longitudinally. Methods: We assessed resting-state functional connectivity of basal ganglia subdivisions and dopamine transporter density using 11C-PE2I PET in thirty-four PD patients at baseline. Of these, twenty PD patients were rescanned after 19.9 ± 3.8 months. A seed-based approach was used to analyze resting-state fMRI data. 11CPE2I binding potential (BPND) was calculated for each participant. PD patients were assessed for disease severity. Results: At baseline, PD patients with greater dopaminergic deficits, as measured with 11C-PE2I PET, showed larger decreases in posterior putamen functional connectivity with the midbrain and pallidum. Reduced functional connectivity of the posterior putamen with the thalamus, midbrain, supplementary motor area and sensorimotor cortex over time were significantly associated with changes in DAT density over the same period. Furthermore, increased motor disability was associated with lower intraregional functional connectivity of the posterior putamen. Conclusions: Our findings suggest that basal ganglia functional connectivity is related to integrity of dopaminergic system in patients with PD. Application of resting-state fMRI in a large cohort and longitudinal scanning may be a powerful tool for assessing underlying PD pathology and its progression

Genetic defects in common variable immunodeficiency

Common variable immunodeficiency (CVID) is the most frequent clinically manifested primary immunodeficiency. According to clinical and laboratory findings, CVID is a heterogeneous group of diseases. Recently, the defects of molecules regulating activation and terminal differentiation of B lymphocytes have been described in some patients with CVID. In this study, we show the overview of deficiencies of inducible costimulator, transmembrane activator and calcium-modulator and cytophilin ligand interactor, CD19 molecules, their genetic basis, pathogenesis and clinical manifestations

Adaptation of sea turtles to climate warming: Will phenological responses be sufficient to counteract changes in reproductive output?

Sea turtles are vulnerable to climate change since their reproductive output is influenced by incubating temperatures, with warmer temperatures causing lower hatching success and increased feminization of embryos. Their ability to cope with projected increases in ambient temperatures will depend on their capacity to adapt to shifts in climatic regimes. Here, we assessed the extent to which phenological shifts could mitigate impacts from increases in ambient temperatures (from 1.5 to 3°C in air temperatures and from 1.4 to 2.3°C in sea surface temperatures by 2100 at our sites) on four species of sea turtles, under a “middle of the road” scenario (SSP2-4.5). Sand temperatures at sea turtle nesting sites are projected to increase from 0.58 to 4.17°C by 2100 and expected shifts in nesting of 26–43 days earlier will not be sufficient to maintain current incubation temperatures at 7 (29%) of our sites, hatching success rates at 10 (42%) of our sites, with current trends in hatchling sex ratio being able to be maintained at half of the sites. We also calculated the phenological shifts that would be required (both backward for an earlier shift in nesting and forward for a later shift) to keep up with present-day incubation temperatures, hatching success rates, and sex ratios. The required shifts backward in nesting for incubation temperatures ranged from −20 to −191 days, whereas the required shifts forward ranged from +54 to +180 days. However, for half of the sites, no matter the shift the median incubation temperature will always be warmer than the 75th percentile of current ranges. Given that phenological shifts will not be able to ameliorate predicted changes in temperature, hatching success and sex ratio at most sites, turtles may need to use other adaptive responses and/or there is the need to enhance sea turtle resilience to climate warming.18 página