Low secondary electron yield engineered surface for electron cloud mitigation

Secondary electron yield (SEY or δ) limits the performance of a number of devices. Particularly, in high-energy charged particle accelerators, the beam-induced electron multipacting is one of the main sources of electron cloud (e-cloud) build up on the beam path; in radio frequency wave guides, the electron multipacting limits their lifetime and causes power loss; and in detectors, the secondary electrons define the signal background and reduce the sensitivity. The best solution would be a material with a low SEY coating and for many applications δ < 1 would be sufficient. We report on an alternative surface preparation to the ones that are currently advocated. Three commonly used materials in accelerator vacuum chambers (stainless steel, copper, and aluminium) were laser processed to create a highly regular surface topography. It is shown that this treatment reduces the SEY of the copper, aluminium, and stainless steel from δmax of 1.90, 2.55, and 2.25 to 1.12, 1.45, and 1.12, respectively. The δmax further reduced to 0.76-0.78 for all three treated metals after bombardment with 500 eV electrons to a dose between 3.5 × 10-3 and 2.0 × 10-2 C·mm-2

Scatter-limited conduction in printed platinum nanofilms

It is demonstrated that thin platinum films may be deposited onto smooth glass substrates using a materials printer and a propriety organometallic ink. Under opti- mised printing and subsequent thermal curing conditions, excellent film adhesion to the substrates was achieved for thicknesses of about 15 nm. The resistivity of the opti- mised films is observed to be a factor of less than 3 higher than pure bulk platinum at 300 K and exhibits a slightly smaller associated thermal coefficient of resistance. The resistivity parameters are found to be insensitive to the gaseous measurement environment which suggests that intercalated carbon regions within the films following the curing process have been largely eliminated. An analysis of the resistivity data indicates that electronic conduction is consistent with enhanced boundary scattering at granular structures that are introduced during multi-pass printing. A minimum electron mean free path of ~18 nm is deduced from the measured film topography. The presented work will find application in biosensor and fuel cell technologies.</p

RF Characterisation of Laser Treated Copper Surfaces for the Mitigation of Electron Cloud in Accelerators

In accelerator beam chambers and RF waveguides, electron cloud and multipacting can be mitigated effectively by reducing the secondary electron yield (SEY). In recent years, it has been established that laser-engineered surface structuring is a very efficient method to create a copper surface with a SEY maximum close to or even below unity. Different laser pulse durations, from nanoseconds to picoseconds, can be used to change surface morphology. Conversely, the characteristics that minimise the SEY, such as the moderately deep grooves and the redeposited nanoparticles, might have unfavourable consequences, including increased RF surface resistance. In this study, we describe the techniques used to measure the surface resistance of laser-treated copper samples using an enhanced dielectric resonator with 12 cm diameter sample sizes operating in the GHz range. The quantification basis lies in a non-contact measurement of the high-frequency losses, focusing on understanding the variation of surface resistance levels depending on the specifics of the treatment and possible post-treatment cleaning procedures.</p

RF Characterisation of Laser Treated Copper Surfaces for the Mitigation of Electron Cloud in Accelerators

In accelerator beam chambers and RF waveguides, electron cloud and multipacting can be mitigated effectively by reducing the secondary electron yield (SEY). In recent years, it has been established that laser-engineered surface structuring is a very efficient method to create a copper surface with a SEY maximum close to or even below unity. Different laser pulse durations, from nanoseconds to picoseconds, can be used to change surface morphology. Conversely, the characteristics that minimise the SEY, such as the moderately deep grooves and the redeposited nanoparticles, might have unfavourable consequences, including increased RF surface resistance. In this study, we describe the techniques used to measure the surface resistance of laser-treated copper samples using an enhanced dielectric resonator with 12 cm diameter sample sizes operating in the GHz range. The quantification basis lies in a non-contact measurement of the high-frequency losses, focusing on understanding the variation of surface resistance levels depending on the specifics of the treatment and possible post-treatment cleaning procedures.</p

Measurement and modelling of the residual stresses in autogenous and narrow gap laser welded AISI grade 316L stainless steel plates

Thick-section austenitic stainless steels have widespread industrial applications, where stress-corrosion cracking is often of major concern. Problems tend to arise in the vicinity of welds, where substantial residual stresses often reside. This paper describes an investigation into the residual stresses in autogenous high power laser welds and narrow gap laser welds (NGLW) in 10 mm thick AISI grade 316L steel plates, using both neutron diffraction and the contour method. The influences of laser power, welding speed and the time interval between weld passes on residual stress were analysed. For the NGLW process, finite element modelling was employed to understand the influence of thermal history on residual stress. The results for the NGLW technique show that the laser power has a significant effect on the peak value of residual stress, while the welding speed has a more significant influence on the width of the region sustaining tensile stresses

Structural plasticity of the selectivity filter in a nonselective ion channel

The sodium potassium ion channel (NaK) is a nonselective ion channel that conducts both sodium and potassium across the cellular membrane. A new crystallographic structure of NaK reveals conformational differences in the residues that make up the selectivity filter between the four subunits that form the ion channel and the inner helix of the ion channel. The crystallographic structure also identifies a side-entry, ion-conduction pathway for Na+ permeation that is unique to NaK. NMR studies and molecular dynamics simulations confirmed the dynamical nature of the top part of the selectivity filter and the inner helix in NaK as also observed in the crystal structure. Taken together, these results indicate that the structural plasticity of the selectivity filter combined with the dynamics of the inner helix of NaK are vital for the efficient conduction of different ions through the non-selective ion channel of NaK

Angle-resolved photoemission spectroscopy with 9-eV photon-energy pulses generated in a gas-filled hollow-core photonic crystal fiber

A recently developed source of ultraviolet radiation, based on optical soliton propagation in a gas-filled hollow-core photonic crystal fiber, is applied here to angle-resolved photoemission spectroscopy (ARPES). Near-infrared femtosecond pulses of only few {\mu}J energy generate vacuum ultraviolet (VUV) radiation between 5.5 and 9 eV inside the gas-filled fiber. These pulses are used to measure the band structure of the topological insulator Bi2Se3 with a signal to noise ratio comparable to that obtained with high order harmonics from a gas jet. The two-order-of-magnitude gain in efficiency promises time-resolved ARPES measurements at repetition rates of hundreds of kHz or even MHz, with photon energies that cover the first Brillouin zone of most materials.Comment: 8 pages, 3 figure

Runoff variations in Lake Balkhash Basin, Central Asia, 1779-2015, inferred from tree rings

Long highly-resolved proxies for runoff are in high demand for hydrological forecasts and water management in arid Central Asia. An accurate (R2 = 0.53) reconstruction of October-September discharge of the Ili River in Kazakhstan, 1779–2015, is developed from moisture-sensitive tree rings of spruce sampled in the Tian Shan Mountains. The fivefold extension of the gauged discharge record represents the variability of runoff in the Lake Balkhash Basin for the last 235 years. The reconstruction shows a 40 year long interval of low discharge preceded a recent high peak in the first decade of the 2000s followed by a decline to more recent levels of discharge not seen since the start of the gauged record. Most reconstructed flow extremes (± 2σ) occur outside the instrumental record (1936–2015) and predate the start of large dam construction (1969). Decadal variability of the Ili discharge corresponds well with hydrological records of other Eurasian internal drainages modeled with tree rings. Spectral analysis identifies variance peaks (highest near 42 year) consistent with main hemispheric oscillations of the Eurasian climatic system. Seasonal comparison of the Ili discharge with sea-level-pressure and geopotential height data suggests periods of high flow likely result from the increased contribution of snow to runoff associated with the interaction of Arctic air circulation with the Siberian High-Pressure System and North Atlantic Oscillation