Mechanical performance of composite bonded joints in the presence of localised process-induced zero-thickness defects

Processing parameters and environmental conditions can introduce variation into the performance of adhesively bonded joints. The effect of such variation on the mechanical performance of the joints is not well understood. Moreover, there is no validated nondestructive inspection (NDI) available to ensure bond integrity post-process and in-service so as to guarantee initial and continued airworthiness in aerospace sector. This research studies polymer bond defects produced in the laboratory scale single-lap composite-to-composite joints that may represent the process-induced defects occurring in actual processing scenarios such as composite joining and repair in composite aircrafts. The effect of such defects on the degradation of a joint's mechanical performance is then investigated via quasi-static testing in conjunction with NDI ultrasonic C-scanning and pulsed thermography. This research is divided into three main sections: 1- manufacturing carbon fibre-reinforced composite joints containing representative nearly zero-thickness bond defects, 2- mechanical testing of the composite joints, and 3- assessment of the NDI capability for detection of the bond defects in such joints

Stimulation of shrimp (Penaeus monodon) hemocytes by lipopolysaccharide-like molecules derived from Novacq™

Immune stimulation through feed additives is a promising strategy that can help to combat disease in shrimp farming and reduce the use of antibiotics and other chemotherapeutics. The present study investigated the in vitro immunostimulatory effects of lipopolysaccharide (LPS)-like molecules isolated from the microbial based feed additive Novacq™ (N-LPS). The presence of LPS-like molecules was confirmed and quantified Novacq™ using a HEK-TLR4 reporter cell line. Primary hemocytes isolated from adult Penaeus monodon were used to measure the immunostimulatory of N-LPS compared with the control group that were treated with E. coli derived LPS (E-LPS). The N-LPS stimulated a rapid and significant induction of the phenoloxidase (PO) response in the hemocytes. The PO response increased with exposure time and LPS concentration and was significantly higher compared with an E. coli LPS (E-LPS) control. In addition, using gene expression data, we quantified the transcriptome response of the hemocytes at 15, 30 and 60 mins post stimulation. Compared with the controls, the N-LPS treated hemocytes had a significant up-regulation of genes involved in the immune system modulation and control at all time-points. Most noteworthy was the significant induction of transcripts that function as serine protease inhibitors (namely SERPINs), that regulate the overexpression of the PO system. Transcription factors from the Notch family which directly regulate the expression of many immune genes were also induced within the hemocytes. Additionally, we also saw a strong up-regulation of crustacean hyperglycemic hormone (CHH) transcripts, an important neuropeptide involved in immune function. Overall, the transcriptome profile of the hemocytes suggests that the LPS component of Novacq™ is highly immunostimulatory and generates a strong PO response in vitro. The subsequent transcriptional response appears to be directed towards preventing further activation of the PO system most likely in an attempt to limit cytoxicity to the host. Our study highlights the immunostimulatory ability of Novacq™ and provides further evidence of the positive health benefits this microbial based feed additive can have in shrimp.</p

Detecting failure of a material handling system through a cognitive twin

This paper describes a methodology for developing a digital twin (DT) based on a rich semantic model and principles of system engineering. The aim is to provide a general model of digital twins (DT) that can improve decision making based on semantic reasoning on real-time system monitoring. The methodology has been tested on a laboratory pilot plant that acts as a material handling system. The key contribution of this research is to propose a generic information model for DT using foundational ontology and principles of systems engineering. The efficacy of the proposed methodology is demonstrated by the automatic detection of a component level failure using semantic reasoning

A Polyadenylation Factor Subunit Implicated in Regulating Oxidative Signaling in Arabidopsis thaliana

BACKGROUND: Plants respond to many unfavorable environmental conditions via signaling mediated by altered levels of various reactive oxygen species (ROS). To gain additional insight into oxidative signaling responses, Arabidopsis mutants that exhibited tolerance to oxidative stress were isolated. We describe herein the isolation and characterization of one such mutant, oxt6. METHODOLOGY/PRINCIPAL FINDINGS: The oxt6 mutation is due to the disruption of a complex gene (At1g30460) that encodes the Arabidopsis ortholog of the 30-kD subunit of the cleavage and polyadenylation specificity factor (CPSF30) as well as a larger, related 65-kD protein. Expression of mRNAs encoding Arabidopsis CPSF30 alone was able to restore wild-type growth and stress susceptibility to the oxt6 mutant. Transcriptional profiling and single gene expression studies show elevated constitutive expression of a subset of genes that encode proteins containing thioredoxin- and glutaredoxin-related domains in the oxt6 mutant, suggesting that stress can be ameliorated by these gene classes. Bulk poly(A) tail length was not seemingly affected in the oxt6 mutant, but poly(A) site selection was different, indicating a subtle effect on polyadenylation in the mutant. CONCLUSIONS/SIGNIFICANCE: These results implicate the Arabidopsis CPSF30 protein in the posttranscriptional control of the responses of plants to stress, and in particular to the expression of a set of genes that suffices to confer tolerance to oxidative stress

Search for new phenomena with top-quark pairs and large missing transverse momentum using 140 fb⁻¹ of collision data at √s = 13 TeV with the ATLAS detector

A search is conducted for new phenomena in events with a top quark pair and large missing transverse momentum, where the top quark pair is reconstructed in final states with one isolated electron or muon and multiple jets. The search is performed using the Large Hadron Collider proton-proton collision data sample at a centre-of-mass energy of √s = 13 TeV recorded by the ATLAS detector that corresponds to an integrated luminosity of 140 fb⁻¹. An analysis based on neural network classifiers is optimised to search for directly produced pairs of supersymmetric partners of the top quark (stop), and to search for spin-0 mediators, produced in association with a pair of top quarks, that decay into dark-matter particles. In the stop search, the analysis is designed to target models in which the mass difference between the stop and the neutralino from the stop decay is close to the top quark mass. This new search is combined with previously published searches in final states with different lepton multiplicities. No significant excess above the Standard Model background is observed, and limits at 95% confidence level are set. Models with neutralinos with masses up to 570 GeV are excluded, while for small neutralino masses models are excluded for stop masses up to 1230 GeV. Scalar (pseudoscalar) dark matter mediator masses as large as 350 (370) GeV are excluded when the coupling strengths of the mediator to Standard Model and dark-matter particles are both set to one. At lower mediator masses, models with production cross-sections as small as 0.15 (0.16) times the nominal predictions are excluded. Results of this search are also used to set constraints on effective four-fermion contact interactions between top quarks and neutrinos

Search for dark mesons decaying to top and bottom quarks in proton-proton collisions at √ = 13 TeV with the ATLAS detector

A search for dark mesons originating from strongly-coupled, SU(2) dark flavor symmetry conserving models and decaying gauge phobically to pure Standard Model final states containing top and bottom quarks is presented. The search targets fully hadronic final states and final states with exactly one electron or muon and multiple jets. The analyzed data sample corresponds to an integrated luminosity of 140 fb⁻¹ of proton-proton collisions collected at √ = 13 TeV with the ATLAS detector at the Large Hadron Collider. No significant excess over the Standard Model background expectation is observed and the results are used to set the first direct constraints on this type of model. The two-dimensional signal space of dark pion masses and dark rho-meson masses is scanned. For / = 0.45, dark pions with masses < 940 GeV are excluded at the 95% CL, while for / = 0.25 masses < 740 GeV are excluded

Precise test of lepton flavour universality in -boson decays into muons and electrons in collisions at √s = 13 TeV with the ATLAS detector

Abstract The ratio of branching ratios of the boson to muons and electrons, _∧/ = ( → )/( → ) , has been measured using 140 fb⁻¹ of collision data at √s = 13 TeV collected with the ATLAS detector at the LHC, probing the universality of lepton couplings. The ratio is obtained from measurements of the ̄ production cross-section in the , and dilepton final states. To reduce systematic uncertainties, it is normalised by the square root of the corresponding ratio _∧/ for the boson measured in inclusive → and → events. By using the precise value of _∧/ determined from ⁺ ⁻ colliders, the ratio _∧ / is determined to be _∧/ = 0.9995 ± 0.0022 (stat) ± 0.0036 (syst) ± 0.0014 (ext). The three uncertainties correspond to data statistics, experimental systematics and the external measurement of _∧/, giving a total uncertainty of 0.0045, and confirming the Standard Model assumption of lepton flavour universality in -boson decays at the 0.5% level

Search for non-resonant Higgs boson pair production in final states with leptons, taus, and photons in collisions at √s = 13 TeV with the ATLAS detector

A search is presented for non-resonant Higgs boson pair production, targeting the bbZZ, 4 ( = or ), ττ, 4τ, γγ and γγττ decay channels. Events are categorised based on the multiplicity of light charged leptons (electrons or muons), hadronically decaying tau leptons, and photons. The search is based on a data sample of proton-proton collisions at √s = 13 TeV recorded with the ATLAS detector during Run 2 of the Large Hadron Collider, corresponding to an integrated luminosity of 140 fb⁻¹. No evidence of the signal is found and the observed (expected) upper limit on the cross-section for non-resonant Higgs boson pair production is determined to be 17 (11) times the Standard Model predicted cross-section at 95% confidence level under the background-only hypothesis. The observed (expected) constraints on the coupling modifier, κλ, are determined to be −6.2 < κλ < 11.6 (−4.5 < κλ < 9.6) at 95% confidence level, assuming the Standard Model for the expected limits and that new physics would only affect κλ

Search for new particles in final states with a boosted top quark and missing transverse momentum in proton-proton collisions at √s = 13 TeV with the ATLAS detector

A search for events with one top quark and missing transverse momentum in the final state is presented. The fully hadronic decay of the top quark is explored by selecting events with a reconstructed boosted top-quark topology produced in association with large missing transverse momentum. The analysis uses 139 fb⁻¹ of proton-proton collision data at a centre-of-mass energy of √s = 13 TeV recorded during 2015-2018 by the ATLAS detector at the Large Hadron Collider. The results are interpreted in the context of simplified models for Dark Matter particle production and the single production of a vector-like quark. Without significant excess relative to the Standard Model expectations, 95% confidence-level upper limits on the corresponding cross-sections are obtained. The production of Dark Matter particles in association with a single top quark is excluded for masses of a scalar (vector) mediator up to 4.3 (2.3) TeV, assuming χ = 1 GeV and the model couplings _ = 0.6 and χ = 0.4 ( = 0.5 and χ = 1). The production of a single vector-like quark is excluded for masses below 1.8 TeV assuming a coupling to the top quark _ = 0.5 and a branching ratio for → of 25%

Search for resonant production of dark quarks in the dijet final state with the ATLAS detector

This paper presents a search for a new ′ resonance decaying into a pair of dark quarks which hadronise into dark hadrons before promptly decaying back as Standard Model particles. This analysis is based on proton-proton collision data recorded at √ = 13 TeV with the ATLAS detector at the Large Hadron Collider between 2015 and 2018, corresponding to an integrated luminosity of 139 fb⁻¹. After selecting events containing large-radius jets with high track multiplicity, the invariant mass distribution of the two highest-transverse-momentum jets is scanned to look for an excess above a data-driven estimate of the Standard Model multijet background. No significant excess of events is observed and the results are thus used to set 95% confidence-level upper limits on the production cross-section times branching ratio of the ′ to dark quarks as a function of the ′ mass for various dark-quark scenarios