Using plant wax markers to estimate the diet composition of grazing Holstein dairy cows

The objective of this study was to test whether diet selection of dairy cows under grazing conditions could be estimated using plant wax markers. Furthermore, differences between 2 cow strains and the effect of concentrate supplementation on plant species selection were investigated. The experiment was a study with a crossover design performed on an organic farm with 12 Swiss Holstein cows and 12 New Zealand Holstein cows. Both experimental periods consisted of a 21-d adaptation and a 7-d measurement period. All cows grazed full time in a rotational stocking system and received either no concentrate or 6 kg/d of a commercial cereal-grain mix. Representative herbage samples of each grazed paddock were taken and botanical composition of subsamples was manually determined. The average proportions of the plant species were 27.8% Lolium perenne, 6.1% Dactylis glomerata, 10.4% Trifolium repens, and 9.0% Taraxacum officinale. Other grass species were merged as "other grass" (38.2%) and other forb species as "other forbs" (8.5%). n-Alkanes, long-chain fatty acids, and long-chain alcohols (LCOH) were analyzed in the samples of plant species, concentrate, and feces from each cow. A linear discriminant analysis indicated that diet components were differentiated best with LCOH (96%) and worst with the combination of all marker groups together (12%). For each marker, the fecal marker recovery (FR) relative to dosed ytterbium was determined in 2 ways. Estimation of diet composition was performed with the software "EatWhat," and results were compared with botanical composition with the Aitchison distance. The results indicate that the diet composition of grazing dairy cows can be estimated using plant wax markers. Additionally, the calculation of FR led to mostly reliable results, yet this approach needs further validation. The most accurate estimation was achieved with the marker combination of n-alkanes and LCOH with a correction for FR. Less accurate estimations were achieved with long-chain fatty acids alone or in combination with n-alkanes. No difference relating to diet selection between the 2 cow strains was recorded, but supplemented cows apparently ingested higher proportions of T. repens than nonsupplemented cows. Awareness that supplementation influences selection behavior of grazing dairy cows may lead to adaptations in botanical composition of the pasture according to the demand of the animals

Approaches in biotechnological applications of natural polymers

Natural polymers, such as gums and mucilage, are biocompatible, cheap, easily available and non-toxic materials of native origin. These polymers are increasingly preferred over synthetic materials for industrial applications due to their intrinsic properties, as well as they are considered alternative sources of raw materials since they present characteristics of sustainability, biodegradability and biosafety. As definition, gums and mucilages are polysaccharides or complex carbohydrates consisting of one or more monosaccharides or their derivatives linked in bewildering variety of linkages and structures. Natural gums are considered polysaccharides naturally occurring in varieties of plant seeds and exudates, tree or shrub exudates, seaweed extracts, fungi, bacteria, and animal sources. Water-soluble gums, also known as hydrocolloids, are considered exudates and are pathological products; therefore, they do not form a part of cell wall. On the other hand, mucilages are part of cell and physiological products. It is important to highlight that gums represent the largest amounts of polymer materials derived from plants. Gums have enormously large and broad applications in both food and non-food industries, being commonly used as thickening, binding, emulsifying, suspending, stabilizing agents and matrices for drug release in pharmaceutical and cosmetic industries. In the food industry, their gelling properties and the ability to mold edible films and coatings are extensively studied. The use of gums depends on the intrinsic properties that they provide, often at costs below those of synthetic polymers. For upgrading the value of gums, they are being processed into various forms, including the most recent nanomaterials, for various biotechnological applications. Thus, the main natural polymers including galactomannans, cellulose, chitin, agar, carrageenan, alginate, cashew gum, pectin and starch, in addition to the current researches about them are reviewed in this article.. }To the Conselho Nacional de Desenvolvimento Cientfíico e Tecnológico (CNPq) for fellowships (LCBBC and MGCC) and the Coordenação de Aperfeiçoamento de Pessoal de Nvíel Superior (CAPES) (PBSA). This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit, the Project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and COMPETE 2020 (POCI-01-0145-FEDER-006684) (JAT)

FIB patterning of stainless steel for the development of nano-structured stent surfaces for cardiovascular applications

Stent implantation is a percutaneous interventional procedure that mitigates vessel stenosis, providing mechanical support within the artery and as such a very valuable tool in the fight against coronary artery disease. However, stenting causes physical damage to the arterial wall. It is well accepted that a valuable route to reduce in-stent re-stenosis can be based on promoting cell response to nano-structured stainless steel (SS) surfaces such as by patterning nano-pits in SS. In this regard patterning by focused ion beam (FIB) milling offers several advantages for flexible prototyping. On the other hand FIB patterning of polycrystalline metals is greatly influenced by channelling effects and redeposition. Correlative microscopy methods present an opportunity to study such effects comprehensively and derive structure–property understanding that is important for developing improved patterning. In this chapter we present a FIB patterning protocol for nano-structuring features (concaves) ordered in rectangular arrays on pre-polished 316L stainless steel surfaces. An investigation based on correlative microscopy approach of the size, shape and depth of the developed arrays in relation to the crystal orientation of the underlying SS domains is presented. The correlative microscopy protocol is based on cross-correlation of top-view scanning electron microscopy, electron backscattering diffraction, atomic force microscopy and cross-sectional (serial) sectioning. Various FIB tests were performed, aiming at improved productivity by preserving nano-size accuracy of the patterned process. The optimal FIB patterning conditions for achieving reasonably high throughput (patterned rate of about 0.03 mm2/h) and nano-size accuracy in dimensions and shapes of the features are discussed as well

Doing Gender Im Technisch-Naturwissen-Schaftlichen Bereich

Für die Lösung des Nachwuchsproblems in den Technikwissenschaften spielt die Gewinnung von Frauen eine zentrale Rolle. Die in der Expertise dargestellten Befunde verdeutlichen dreierlei: (1) In den Natur- und Technikwissenschaften "verliert" man Frauen sehr früh im Lebensverlauf. (2) Wie beim Durchlauf eines Trichters (leaking pipeline) verringert sich mit jeder Bildungs- und Karrierestufe die Anzahl von Frauen in diesen Fächern und Berufen. (3) Die Erhöhung des Interesses für Technikwissenschaften von Mädchen und Frauen ist nicht nur "ein Problem" für das Bildungssystem, sondern ganz wesentlich auch des Arbeitsmarktes. Die Befunde der Expertise zeigen, dass es unbedingt notwendig ist, jungen Frauen, die in technischen Berufen gut ausgebildet sind, eine höhere Chance als bisher zu geben, (a) ihren Beruf aus dem Bereich Mathematik, Informatik, Naturwissenschaften, Technik (im Folgenden kurz: MINT) auszuüben und (b) dies auch mit den gleichen Gratifikationen wie Männer. Diese Herausforderung muss - und zwar unabhängig von der Nachfrage nach neuem Personal in technischen Berufen - schnell gemeistert werden, wenn Wirtschaft und Politik ein ernst gemeintes Interesse an "Frauen in MINT-Berufen" besitzen

CCNE1 and survival of patients with tubo-ovarian high-grade serous carcinoma: An Ovarian Tumor Tissue Analysis consortium study

BACKGROUND: Cyclin E1 (CCNE1) is a potential predictive marker and therapeutic target in tubo-ovarian high-grade serous carcinoma (HGSC). Smaller studies have revealed unfavorable associations for CCNE1 amplification and CCNE1 overexpression with survival, but to date no large-scale, histotype-specific validation has been performed. The hypothesis was that high-level amplification of CCNE1 and CCNE1 overexpression, as well as a combination of the two, are linked to shorter overall survival in HGSC. METHODS: Within the Ovarian Tumor Tissue Analysis consortium, amplification status and protein level in 3029 HGSC cases and mRNA expression in 2419 samples were investigated. RESULTS: High-level amplification (>8 copies by chromogenic in situ hybridization) was found in 8.6% of HGSC and overexpression (>60% with at least 5% demonstrating strong intensity by immunohistochemistry) was found in 22.4%. CCNE1 high-level amplification and overexpression both were linked to shorter overall survival in multivariate survival analysis adjusted for age and stage, with hazard stratification by study (hazard ratio [HR], 1.26; 95% CI, 1.08-1.47, p = .034, and HR, 1.18; 95% CI, 1.05-1.32, p = .015, respectively). This was also true for cases with combined high-level amplification/overexpression (HR, 1.26; 95% CI, 1.09-1.47, p = .033). CCNE1 mRNA expression was not associated with overall survival (HR, 1.00 per 1-SD increase; 95% CI, 0.94-1.06; p = .58). CCNE1 high-level amplification is mutually exclusive with the presence of germline BRCA1/2 pathogenic variants and shows an inverse association to RB1 loss. CONCLUSION: This study provides large-scale validation that CCNE1 high-level amplification is associated with shorter survival, supporting its utility as a prognostic biomarker in HGSC

Endometrial Cancer Molecular Risk Stratification is Equally Prognostic for Endometrioid Ovarian Carcinoma.

PURPOSE: Endometrioid ovarian carcinoma (ENOC) is generally associated with a more favorable prognosis compared with other ovarian carcinomas. Nonetheless, current patient treatment continues to follow a "one-size-fits-all" approach. Even though tumor staging offers stratification, personalized treatments remain elusive. As ENOC shares many clinical and molecular features with its endometrial counterpart, we sought to investigate The Cancer Genome Atlas-inspired endometrial carcinoma (EC) molecular subtyping in a cohort of ENOC. EXPERIMENTAL DESIGN: IHC and mutation biomarkers were used to segregate 511 ENOC tumors into four EC-inspired molecular subtypes: low-risk POLE mutant (POLEmut), moderate-risk mismatch repair deficient (MMRd), high-risk p53 abnormal (p53abn), and moderate-risk with no specific molecular profile (NSMP). Survival analysis with established clinicopathologic and subtype-specific features was performed. RESULTS: A total of 3.5% of cases were POLEmut, 13.7% MMRd, 9.6% p53abn, and 73.2% NSMP, each showing distinct outcomes (P < 0.001) and survival similar to observations in EC. Median OS was 18.1 years in NSMP, 12.3 years in MMRd, 4.7 years in p53abn, and not reached for POLEmut cases. Subtypes were independent of stage, grade, and residual disease in multivariate analysis. CONCLUSIONS: EC-inspired molecular classification provides independent prognostic information in ENOC. Our findings support investigating molecular subtype-specific management recommendations for patients with ENOC; for example, subtypes may provide guidance when fertility-sparing treatment is desired. Similarities between ENOC and EC suggest that patients with ENOC may benefit from management strategies applied to EC and the opportunity to study those in umbrella trials