Frictional effects on the dynamic responses of gear systems and the diagnostics of tooth breakages

To develop accurate diagnostic techniques, this study examines the dynamic responses of spur gear transmission system with including frictional effects on a tooth mesh process. An 8-degree-of-freedom model is developed to include the effects of supporting bearings, a driving motor and a loading system. Moreover, it takes into account not only the time-varying stiffness, but also the time-varying forces and moments due to the frictional effect. The latter causes additional vibration responses in the direction of the off-line-of-action (OLOA). To show the quantitative effect of the friction, vibration responses are simulated under different friction coefficients. It shows that an increase in friction coefficient value causes a nearly linear increase in the vibration features of diagnostics. However, features from torsional responses and the principal responses in the line-of-action show less changes in the vibration level, whereas the most significant increasing is in the OLOA direction. Furthermore, the spectral peaks at the rotational and sideband frequencies are influenced significantly by small breakage defects, especially when the friction effect is taken into account. In addition, the second and third harmonics of the mesh frequency are more influenced than the first harmonic component for all motions, which can be effective features for both indicating lubrication deterioration and improving conventional diagnostic features

Ab initio studies of electronic structure of defects in PbTe

Understanding the detailed electronic structure of deep defect states in narrow band-gap semiconductors has been a challenging problem. Recently, self-consistent ab initio calculations within density functional theory (DFT) using supercell models have been successful in tackling this problem. In this paper, we carry out such calculations in PbTe, a well-known narrow band-gap semiconductor, for a large class of defects: cationic and anionic substitutional impurities of different valence, and cationic and anionic vacancies. For the cationic defects, we study a series of compounds RPb2n-1Te2n, where R is vacancy or monovalent, divalent, or trivalent atom; for the anionic defects, we study compounds MPb2nTe2n-1, where M is vacancy, S, Se or I. We find that the density of states (DOS) near the top of the valence band and the bottom of the conduction band get significantly modified for most of these defects. This suggests that the transport properties of PbTe in the presence of impurities can not be interpreted by simple carrier doping concepts, confirming such ideas developed from qualitative and semi-quantitative arguments

Can disordered mobile phone use be considered a behavioral addiction? An update on current evidence and a comprehensive model for future research

Despite the many positive outcomes, excessive mobile phone use is now often associated with potentially harmful and/or disturbing behaviors (e.g., symptoms of deregulated use, negative impact on various aspects of daily life such as relationship problems, and work intrusion). Problematic mobile phone use (PMPU) has generally been considered as a behavioral addiction that shares many features with more established drug addictions. In light of the most recent data, the current paper reviews the validity of the behavioral addiction model when applied to PMPU. On the whole, it is argued that the evidence supporting PMPU as an addictive behavior is scarce. In particular, it lacks studies that definitively show behavioral and neurobiological similarities between mobile phone addiction and other types of legitimate addictive behaviors. Given this context, an integrative pathway model is proposed that aims to provide a theoretical framework to guide future research in the field of PMPU. This model highlights that PMPU is a heterogeneous and multi-faceted condition

Micro-fabrication of Carbon Structures by Pattern Miniaturization in Resorcinol-Formaldehyde Gel

A simple and novel method to fabricate and miniaturize surface and sub-surface micro-structures and micro-patterns in glassy carbon is proposed and demonstrated. An aqueous resorcinol-formaldehyde (RF) sol is employed for micro-molding of the master-pattern to be replicated, followed by controlled drying and pyrolysis of the gel to reproduce an isotropically shrunk replica in carbon. The miniaturized version of the master-pattern thus replicated in carbon is about one order of magnitude smaller than original master by repeating three times the above cycle of molding and drying. The micro-fabrication method proposed will greatly enhance the toolbox for a facile fabrication of a variety of Carbon-MEMS and C-microfluidic devices.Comment: 16 pages, 5 figure

The Role of Health Behaviours Across the Life Course in the Socioeconomic Patterning of All-Cause Mortality: The West of Scotland Twenty-07 Prospective Cohort Study

Background: Socioeconomic differentials in mortality are increasing in many industrialised countries. Purpose: This study aims to examine the role of behaviours (smoking, alcohol, exercise, and diet) in explaining socioeconomic differentials in mortality and whether this varies over the life course, between cohorts and by gender. Methods: Analysis of two representative population cohorts of men and women, born in the 1950s and 1930s, were performed. Health behaviours were assessed on five occasions over 20 years. Results: Health behaviours explained a substantial part of the socioeconomic differentials in mortality. Cumulative behaviours and those that were more strongly associated with socioeconomic status had the greatest impact. For example, in the 1950s cohort, the age-sex adjusted hazard ratio comparing respondents with manual versus non-manual occupational status was 1.80 (1.25, 2.58); adjustment for cumulative smoking over 20 years attenuated the association by 49 %, diet by 43 %, drinking by 13 % and inactivity by only 1%. Conclusions: Health behaviours have an important role in explaining socioeconomic differentials in mortality. © 2013 The Author(s)

The global burden of tuberculosis: results from the Global Burden of Disease Study 2015

Background: An understanding of the trends in tuberculosis incidence, prevalence, and mortality is crucial to tracking of the success of tuberculosis control programmes and identification of remaining challenges. We assessed trends in the fatal and non-fatal burden of tuberculosis over the past 25 years for 195 countries and territories. Methods: We analysed 10 691 site-years of vital registration data, 768 site-years of verbal autopsy data, and 361 site-years of mortality surveillance data using the Cause of Death Ensemble model to estimate tuberculosis mortality rates. We analysed all available age-specific and sex-specific data sources, including annual case notifications, prevalence surveys, and estimated cause-specific mortality, to generate internally consistent estimates of incidence, prevalence, and mortality using DisMod-MR 2.1, a Bayesian meta-regression tool. We assessed how observed tuberculosis incidence, prevalence, and mortality differed from expected trends as predicted by the Socio-demographic Index (SDI), a composite indicator based on income per capita, average years of schooling, and total fertility rate. We also estimated tuberculosis mortality and disability-adjusted life-years attributable to the independent effects of risk factors including smoking, alcohol use, and diabetes. Findings: Globally, in 2015, the number of tuberculosis incident cases (including new and relapse cases) was 10·2 million (95% uncertainty interval 9·2 million to 11·5 million), the number of prevalent cases was 10·1 million (9·2 million to 11·1 million), and the number of deaths was 1·3 million (1·1 million to 1·6 million). Among individuals who were HIV negative, the number of incident cases was 8·8 million (8·0 million to 9·9 million), the number of prevalent cases was 8·9 million (8·1 million to 9·7 million), and the number of deaths was 1·1 million (0·9 million to 1·4 million). Annualised rates of change from 2005 to 2015 showed a faster decline in mortality (–4·1% [–5·0 to –3·4]) than in incidence (–1·6% [–1·9 to –1·2]) and prevalence (–0·7% [–1·0 to –0·5]) among HIV-negative individuals. The SDI was inversely associated with HIV-negative mortality rates but did not show a clear gradient for incidence and prevalence. Most of Asia, eastern Europe, and sub-Saharan Africa had higher rates of HIV-negative tuberculosis burden than expected given their SDI. Alcohol use accounted for 11·4% (9·3–13·0) of global tuberculosis deaths among HIV-negative individuals in 2015, diabetes accounted for 10·6% (6·8–14·8), and smoking accounted for 7·8% (3·8–12·0). Interpretation: Despite a concerted global effort to reduce the burden of tuberculosis, it still causes a large disease burden globally. Strengthening of health systems for early detection of tuberculosis and improvement of the quality of tuberculosis care, including prompt and accurate diagnosis, early initiation of treatment, and regular follow-up, are priorities. Countries with higher than expected tuberculosis rates for their level of sociodemographic development should investigate the reasons for lagging behind and take remedial action. Efforts to prevent smoking, alcohol use, and diabetes could also substantially reduce the burden of tuberculosis

Shading Beats Binocular Disparity in Depth from Luminance Gradients: Evidence against a Maximum Likelihood Principle for Cue Combination

Perceived depth is conveyed by multiple cues, including binocular disparity and luminance shading. Depth perception from luminance shading information depends on the perceptual assumption for the incident light, which has been shown to default to a diffuse illumination assumption. We focus on the case of sinusoidally corrugated surfaces to ask how shading and disparity cues combine defined by the joint luminance gradients and intrinsic disparity modulation that would occur in viewing the physical corrugation of a uniform surface under diffuse illumination. Such surfaces were simulated with a sinusoidal luminance modulation (0.26 or 1.8 cy/deg, contrast 20%-80%) modulated either in-phase or in opposite phase with a sinusoidal disparity of the same corrugation frequency, with disparity amplitudes ranging from 0’-20’. The observers’ task was to adjust the binocular disparity of a comparison random-dot stereogram surface to match the perceived depth of the joint luminance/disparitymodulated corrugation target. Regardless of target spatial frequency, the perceived target depth increased with the luminance contrast and depended on luminance phase but was largely unaffected by the luminance disparity modulation. These results validate the idea that human observers can use the diffuse illumination assumption to perceive depth from luminance gradients alone without making an assumption of light direction. For depth judgments with combined cues, the observers gave much greater weighting to the luminance shading than to the disparity modulation of the targets. The results were not well-fit by a Bayesian cue-combination model weighted in proportion to the variance of the measurements for each cue in isolation. Instead, they suggest that the visual system uses disjunctive mechanisms to process these two types of information rather than combining them according to their likelihood ratios

The validity of the EQ-5D-3L items: An investigation with type 2 diabetes patients from six European countries

Background: Most previous studies concerning the validity of the EQ-5D-3L items refer to applications of only a single language version of the EQ-5D-3L in only one country. Therefore, there is little information concerning the extent to which the results can be generalised across different language versions and

Global, regional, and national burden of chronic kidney disease, 1990–2017 : a systematic analysis for the Global Burden of Disease Study 2017

Background Health system planning requires careful assessment of chronic kidney disease (CKD) epidemiology, but data for morbidity and mortality of this disease are scarce or non-existent in many countries. We estimated the global, regional, and national burden of CKD, as well as the burden of cardiovascular disease and gout attributable to impaired kidney function, for the Global Burden of Diseases, Injuries, and Risk Factors Study 2017. We use the term CKD to refer to the morbidity and mortality that can be directly attributed to all stages of CKD, and we use the term impaired kidney function to refer to the additional risk of CKD from cardiovascular disease and gout. Methods The main data sources we used were published literature, vital registration systems, end-stage kidney disease registries, and household surveys. Estimates of CKD burden were produced using a Cause of Death Ensemble model and a Bayesian meta-regression analytical tool, and included incidence, prevalence, years lived with disability, mortality, years of life lost, and disability-adjusted life-years (DALYs). A comparative risk assessment approach was used to estimate the proportion of cardiovascular diseases and gout burden attributable to impaired kidney function. Findings Globally, in 2017, 1·2 million (95% uncertainty interval [UI] 1·2 to 1·3) people died from CKD. The global all-age mortality rate from CKD increased 41·5% (95% UI 35·2 to 46·5) between 1990 and 2017, although there was no significant change in the age-standardised mortality rate (2·8%, −1·5 to 6·3). In 2017, 697·5 million (95% UI 649·2 to 752·0) cases of all-stage CKD were recorded, for a global prevalence of 9·1% (8·5 to 9·8). The global all-age prevalence of CKD increased 29·3% (95% UI 26·4 to 32·6) since 1990, whereas the age-standardised prevalence remained stable (1·2%, −1·1 to 3·5). CKD resulted in 35·8 million (95% UI 33·7 to 38·0) DALYs in 2017, with diabetic nephropathy accounting for almost a third of DALYs. Most of the burden of CKD was concentrated in the three lowest quintiles of Socio-demographic Index (SDI). In several regions, particularly Oceania, sub-Saharan Africa, and Latin America, the burden of CKD was much higher than expected for the level of development, whereas the disease burden in western, eastern, and central sub-Saharan Africa, east Asia, south Asia, central and eastern Europe, Australasia, and western Europe was lower than expected. 1·4 million (95% UI 1·2 to 1·6) cardiovascular disease-related deaths and 25·3 million (22·2 to 28·9) cardiovascular disease DALYs were attributable to impaired kidney function. Interpretation Kidney disease has a major effect on global health, both as a direct cause of global morbidity and mortality and as an important risk factor for cardiovascular disease. CKD is largely preventable and treatable and deserves greater attention in global health policy decision making, particularly in locations with low and middle SDI