Framing bias : the effect of figure presentation on seismic interpretation

The authors thank all the participants in the survey, and those who helped to distribute it. We thank Prof. Christopher Jackson and co-authors for allowing the use of their published images in this experiment. Juan Alcalde is funded by NERC grant NE/M007251/1, on interpretational uncertainty.Peer reviewedPublisher PD

The use of total simulator training in transitioning air-carrier pilots: A field evaluation

A field study was conducted in which the performance of air carrier transitioning pilots who had landing training in a landing maneuver approved simulator was compared with the performance of pilots who had landing training in the aircraft. Forty-eight trainees transitioning to the B-727 aircraft and eighty-seven trainees transitioning to the DC-10 were included in the study. The study results in terms of both objectively measured performance indicants and observer and check-pilot ratings did not demonstrate a clear distinction between the two training groups. The results suggest that, for these highly skilled transitioning pilots, a separate training module in the aircraft may be of dubious value

Nurses\u27 Alumnae Association Bulletin - Volume 2 Number 3

The Jefferson Nurse Letter from the President Delegates to Biennial Convention Attention Blood Transfusion - Plasma Unit Life in the Army Nurse Corps Secretary\u27s Report Elected to New Office 1892-1942 Progress or Alumnae Association 1892-1942 Report of the School of Nursing Staff News Please Change My Address Air Cooled Red Cross Report Fingerprinting Graduates in the U.S. Army and Navy Degrees Received Promotions Jubilee Report Engagements Marriages Births New Positions - 1941-1942 New Positions on the Nursing Staff of the Hospita

Prospects for local co-governance

British local authorities and their partners are increasingly developing new ways of working together with local communities. The nature of this co-working, however, is complex, multi-faceted and little understood. This article argues for greater clarity of thinking on the topic, by analysing this co-working as a form of political co-governance, and drawing attention in particular to issues of scale and democracy. Using evidence from a study of 43 local authority areas, 16 authorities are identified where co-governance is practised, following three main types of approach: service-influencing, service-delivering and parish council developing. It is concluded that strengthening political co-governance is essential for a healthy democracy

The atomic structure of large-angle grain boundaries Σ5\Sigma 5 and Σ13\Sigma 13 in YBa2Cu3O7−δ{\rm YBa_2Cu_3O_{7-\delta}} and their transport properties

We present the results of a computer simulation of the atomic structures of large-angle symmetrical tilt grain boundaries (GBs) $\Sigma 5$ (misorientation angles \q{36.87}{^{\circ}} and \q{53.13}{^{\circ}}), $\Sigma 13$ (misorientation angles \q{22.62}{^{\circ}} and \q{67.38}{^{\circ}}). The critical strain level $\epsilon_{crit}$ criterion (phenomenological criterion) of Chisholm and Pennycook is applied to the computer simulation data to estimate the thickness of the nonsuperconducting layer ${\rm h_n}$ enveloping the grain boundaries. The ${\rm h_n}$ is estimated also by a bond-valence-sum analysis. We propose that the phenomenological criterion is caused by the change of the bond lengths and valence of atoms in the GB structure on the atomic level. The macro- and micro- approaches become consistent if the $\epsilon_{crit}$ is greater than in earlier papers. It is predicted that the symmetrical tilt GB $\Sigma5$ \theta = \q{53.13}{^{\circ}} should demonstrate a largest critical current across the boundary.Comment: 10 pages, 2 figure

Influence of Grain Boundary Character on Creep Void Formation in Alloy 617

Alloy 617, a high temperature creep-resistant, nickel-based alloy, is being considered for the primary heat exchanger for the Next Generation Nuclear Plant (NGNP) which will operate at temperatures exceeding 760oC. Orientation imaging microscopy (OIM) is used to characterize the grain boundaries in the vicinity of creep voids that develop during high temperature creep tests (800-1000oC at creep stresses ranging from 20-85 MPa) terminated at creep strains ranging from 5-40%. Observations using optical microscopy indicate creep rate does not significantly influence the creep void fraction at a given creep strain. Preliminary analysis of the OIM data indicates voids tend to form on grain boundaries parallel, perpendicular or 45o to the tensile axis, while few voids are found at intermediate inclinations to the tensile axis. Random grain boundaries intersect most voids while CSL-related grain boundaries did not appear to be consistently associated with void development

A search for new phenomena in pp collisions at [Formula: see text] in final states with missing transverse momentum and at least one jet using the [Formula: see text] variable.

A search for new phenomena is performed in final states containing one or more jets and an imbalance in transverse momentum in pp collisions at a centre-of-mass energy of 13[Formula: see text]. The analysed data sample, recorded with the CMS detector at the CERN LHC, corresponds to an integrated luminosity of 2.3[Formula: see text]. Several kinematic variables are employed to suppress the dominant background, multijet production, as well as to discriminate between other standard model and new physics processes. The search provides sensitivity to a broad range of new-physics models that yield a stable weakly interacting massive particle. The number of observed candidate events is found to agree with the expected contributions from standard model processes, and the result is interpreted in the mass parameter space of fourteen simplified supersymmetric models that assume the pair production of gluinos or squarks and a range of decay modes. For models that assume gluino pair production, masses up to 1575 and 975[Formula: see text] are excluded for gluinos and neutralinos, respectively. For models involving the pair production of top squarks and compressed mass spectra, top squark masses up to 400[Formula: see text] are excluded