5,474 research outputs found
tau Decays to Five Mesons in TAUOLA
The tau-decay library TAUOLA has gained popularity over the last decade.
However, with the continuously increasing precision of the data, some of its
functionality has become insufficient. One of the requirements is the
implementation of decays into five mesons plus a neutrino with a realistic
decay amplitude. This note describes a step into this direction. For the 2pi-
pi+ 2pi0 mode the three decay chains tau- --> a_1- nu --> rho- (--> pi- pi0)
omega (--> pi- pi+ pi0) nu, tau- --> a_1- nu --> a_1- (--> 2pi- pi+) f_0 (-->
2pi0) nu, and tau- --> a_1- nu --> a_1- (--> pi- 2pi0) f_0 (--> pi + pi-) nu
are introduced with simple assumptions about the couplings and propagators of
the various resonances. Similar amplitudes (without the rho omega
contributions) are adopted for the pi- 4pi0 and 3pi- 2pi+ modes.
The five-pion amplitude is thus based on a simple model, which, however, can
be considered as a first realistic example. Phase-space generation includes the
possibility of presampling the omega and a_1 resonances, in one channel only,
however. This is probably sufficient for the time being, both for physics
applications and for tests.
The technical test of the new part of the generator is performed by comparing
Monte Carlo and analytical results. To this end a non-realistic, but easy to
calculate, purely scalar amplitude for the decay into five massless pions was
used.Comment: 10 page
Mass Determination in SUSY-like Events with Missing Energy
We describe a kinematic method which is capable of determining the overall
mass scale in SUSY-like events at a hadron collider with two missing (dark
matter) particles. We focus on the kinematic topology in which a pair of
identical particles is produced with each decaying to two leptons and an
invisible particle (schematically, followed by each
decaying via where is invisible). This topology
arises in many SUSY processes such as squark and gluino production and decay,
not to mention t\anti t di-lepton decays. In the example where the final
state leptons are all muons, our errors on the masses of the particles ,
and in the decay chain range from 4 GeV for 2000 events after cuts to 13
GeV for 400 events after cuts. Errors for mass differences are much smaller.
Our ability to determine masses comes from considering all the kinematic
information in the event, including the missing momentum, in conjunction with
the quadratic constraints that arise from the , and mass-shell
conditions. Realistic missing momentum and lepton momenta uncertainties are
included in the analysis.Comment: 41 pages, 14 figures, various clarifications and expanded discussion
included in revised version that conforms to the version to be publishe
A high intensity radiation effects facility
The facility of the Michigan Ion Beam Laboratory at the University of Michigan has been upgraded to conduct high intensity radiation effects studies on materials. This upgrade is necessary to pursue higher radiation damage levels than the studies previously conducted. To achieve this capability a new volume ion source was installed which can produce several times more H−H− current than the previous duoplasmatron. We will describe the objectives of the research and the facility as well as applications to a variety of radiation damage problems. © 2001 American Institute of Physics.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87674/2/687_1.pd
A hybrid method for determining particle masses at the Large Hadron Collider with fully identified cascade decays
A new technique for improving the precision of measurements of SUSY particle
masses at the LHC is introduced. The technique involves kinematic fitting of
events with two fully identified decay chains. We incorporate both event ETmiss
constraints and independent constraints provided by kinematic end-points in
experiment invariant mass distributions of SUSY decay products. Incorporation
of the event specific information maximises the information used in the fit and
is shown to reduce the mass measurement uncertainites by ~30% compared to
conventional fitting of experiment end-point constraints for the SPS1a
benchmark model.Comment: 10 pages, 2 .eps figures, JHEP3 styl
Supersymmetric particle mass measurement with invariant mass correlations
The kinematic end-point technique for measuring the masses of supersymmetric
particles in R-Parity conserving models at hadron colliders is re-examined with
a focus on exploiting additional constraints arising from correlations in
invariant mass observables. The use of such correlations is shown to
potentially resolve the ambiguity in the interpretation of quark+lepton
end-points and enable discrimination between sequential two-body and three-body
lepton-producing decays. The use of these techniques is shown to improve the
SUSY particle mass measurement precision for the SPS1a benchmark model by at
least 20-30% compared to the conventional end-point technique.Comment: 29 pages, 23 .eps figures, JHEP3 style; v2 adds some references and
small clarifications to text; v3 adds some more clarifications to the tex
Reach of the Fermilab Tevatron for minimal supergravity in the region of large scalar masses
The reach of the Fermilab Tevatron for supersymmetric matter has been
calculated in the framework of the minimal supergravity model in the clean
trilepton channel. Previous analyses of this channel were restricted to scalar
masses m_0<= 1 TeV. We extend the analysis to large values of scalar masses
m_0\sim 3.5 TeV. This includes the compelling hyperbolic branch/focus point
(HB/FP) region, where the superpotential \mu parameter becomes small. In this
region, assuming a 5\sigma (3\sigma) signal with 10 (25) fb^{-1} of integrated
luminosity, the Tevatron reach in the trilepton channel extends up to
m_{1/2}\sim 190 (270) GeV independent of \tan\beta . This corresponds to a
reach in terms of the gluino mass of m_{\tg}\sim 575 (750) GeV.Comment: 11 page latex file including 6 EPS figures; several typos corrected
and references adde
The Reach of CERN LEP2 and Fermilab Tevatron Upgrades for Higgs Bosons in Supersymmetric Models
Luminosity upgrades of the Fermilab Tevatron pbar-p collider have been shown
to allow experimental detection of a Standard Model (SM) Higgs boson up to
GeV via events. This limit
nearly saturates the parameter space for many models of weak scale
supersymmetry (SUSY) with a minimal particle content. It is therefore
interesting to examine the SUSY Higgs reach of future Tevatron experiments.
Contours are presented of Higgs boson reach for CERN LEP2 and Tevatron
luminosity upgrades for three models of weak scale SUSY: the Minimal
Supersymmetric Standard Model (MSSM), the minimal Supergravity model (mSUGRA)
and a simple Gauge Mediated SUSY Breaking Model (GMSB). In each case we find a
substantial gain in reach at the Tevatron with integrated luminosity increasing
from 10 fb^{-1} to 25-30 fb^{-1}. With the larger integrated luminosity, a
Higgs search at the Tevatron should be able to probe essentially the entire
parameter space of these models. While a discovery would be very exciting, a
negative result would severely constrain our ideas about how weak scale
supersymmetry is realized.Comment: 12 pages + 7 figures. Uses REVTEX and epsf macros. Several references
added, stated value of A-parameters corrected, note added reguarding sgn(mu)
dependence in MSSM case. To appear in Physical Review
Three heavy jet events at hadron colliders as a sensitive probe of the Higgs sector
Assuming that a non-standard neutral Higgs with an enhanced Yukawa coupling
to a bottom quark is observed at future hadron experiments, we propose a method
for a better understanding of the Higgs sector. Our procedure is based on
"counting" the number of events with heavy jets (where "heavy" stands for a c
or b jet) versus b jets, in the final state of processes in which the Higgs is
produced in association with a single high p_T c or b jet. We show that an
observed signal of the type proposed, at either the Tevatron or the LHC, will
rule out the popular two Higgs doublet model of type II as well as its
supersymmetric version - the Minimal Supersymmetric Standard Model (MSSM), and
may provide new evidence in favor of some more exotic multi Higgs scenarios. As
an example, we show that in a version of a two Higgs doublet model which
naturally accounts for the large mass of the top quark, our signal can be
easily detected at the LHC within that framework. We also find that such a
signal may be observable at the upgraded Tevatron RunIII, if the neutral Higgs
in this model has a mass around 100 GeV and \tan\beta > 50 and if the
efficiency for distinguishing a c jet from a light jet will reach the level of
50%.Comment: Revtex, 11 pages, 4 figures embedded in the text. Main changes with
respect to Version 1: Numerical results re-calculated using the CTEQ5L pdf,
improved discussion on the experimental consequences, new references added.
Conclusions remain unchanged. As will appear in Phys. Rev.
Discriminating Electroweak-ino Parameter Ordering at the LHC and Its Impact on LFV Studies
Current limit on the dark matter relic abundance may suggest that
should be smaller than prediction in the minimal supergravity scenario (mSUGRA)
for moderate and . The electroweak-ino parameter and
are then much closer to each other. This can be realized naturally in
the non-universal Higgs mass model (NUHM). Since the heaviest neutralino
() and chargino () have significant gaugino
components, they may appear frequently in the left-handed squark decay and then
be detectable at the LHC. In such a case, we showed that the hierarchy of and can be determined. In the light slepton mass scenario with
non-vanishing lepton-flavor violation (LFV) in the right-handed sector, NUHM
with small corresponds to region of parameter space where strong
cancellation among leading contributions to can occur. We
showed that determination of electroweak-ino hierarchy plays a crucial role in
resolving cancellation point of and determination of LFV
parameters. We also discussed test of the universality of the slepton masses at
the LHC and the implications to SUSY flavor models.Comment: 34 pages, 16 figure
Les Houches Guidebook to Monte Carlo Generators for Hadron Collider Physics
Recently the collider physics community has seen significant advances in the
formalisms and implementations of event generators. This review is a primer of
the methods commonly used for the simulation of high energy physics events at
particle colliders. We provide brief descriptions, references, and links to the
specific computer codes which implement the methods. The aim is to provide an
overview of the available tools, allowing the reader to ascertain which tool is
best for a particular application, but also making clear the limitations of
each tool.Comment: 49 pages Latex. Compiled by the Working Group on Quantum
ChromoDynamics and the Standard Model for the Workshop ``Physics at TeV
Colliders'', Les Houches, France, May 2003. To appear in the proceeding
- …
