Prevalence of age-related hearing loss in Europe: a review

Populations are becoming progressively older thus presenting symptoms of diminished organ function due to degenerative processes. These may be physiological or caused by additional factors damaging the organ. Presbyacusis refers to the physiological age-related changes of the peripheral and central auditory system leading to hearing impairment and difficulty understanding spoken language. In contrast to epidemiological data of other continents, the prevalence of age-related hearing loss (ARHL) in Europe is not well defined, due in part to the use of different classification systems. We performed a systematic literature review with the aim of gaining a picture of the prevalence of ARHL in Europe. The review included only population and epidemiological studies in English since 1970 with samples in European countries with subjects aged 60years and above. Nineteen studies met our selection criteria and additional five studies reported self-reported hearing impairment. When these data were crudely averaged and interpolated, roughly 30% of men and 20% of women in Europe were found to have a hearing loss of 30dB HL or more by age 70years, and 55% of men and 45% of women by age 80years. Apparent problems in comparing the available data were the heterogeneity of measures and cut-offs for grades of hearing impairment. Our systematic review of epidemiological data revealed more information gaps than information that would allow gaining a meaningful picture of prevalence of ARHL. The need for standardized procedures when collecting and reporting epidemiological data on hearing loss has become evident. Development of hearing loss over time in conjunction with the increase in life expectancy is a major factor determining strategies of detection and correction of ARHL. Thus, we recommend using the WHO classification of hearing loss strictly and including standard audiometric measures in population-based health survey

Sediment dynamics and geohazards offshore Uruguay and northern Argentina: first results from the multi-disciplinary Meteor-cruise M78-3

About 90% of the sediments generated by weathering and erosion on land get finally deposited at the ocean margins. The sediment distribution processes and landscape evolution on land are relatively well understood, but comparably little is known about the role and relative importance of marine sediment dynamics in controlling the architectural evolution of ocean margins. Important players include hemi-pelagic settling, down-slope and current-controlled along-slope sediment transport, depositional and post-depositional sedimentary processes (e.g. consolidation and diagenesis), as well as the destabilization of sediment bodies and their erosion. Submarine landslides in this context thus may represent an important sediment transport process, but also a major geo-hazard due to the increasing number of offshore constructions as well as their potential to instantaneously displace large water masses triggering waves in densely populated coastal areas. Here we present first results from a seagoing expedition that aimed at investigating the interaction processes of sediment redistribution, partitioning, deposition and diagenesis from the coast to the deep-sea along the western South-Atlantic passive continental margin. During RV Meteor Cruise M78/3 in May-July 2009 the shelf, slope and rise offshore Argentina and Uruguay have been investigated by means of hydroacoustic and seismic mapping as well as geological sampling with conventional coring tools as well as the new MARUM seafloor drill rig (MeBo) that revealed recovery of geological strata sampled from up to 50m below seafloor. The working area is characterized by a high amount of fluvial input by the Rio de la Plata river. The continental slope is relatively wide and shows average slope gradients between 1 and 2.5 but locally higher slope gradients may occur (>5). The transition for the continental rise with low slope gradients is found in ~3000 m water depth. The working area is located in a highly dynamic oceanographic regime. Cold Antarctic water masses of the northward flowing Malvina current meet warm water masses of the southward flowing Brazil current in the working area. Various types of sediment instabilities have been imaged in geophysical and core data, documenting particularly the continental slope offshore Uruguay to be locus of frequent submarine landslides. Apart from individual landslides, however, gravitational downslope sediment transport along the continental slope is restricted to the prominent Mar del Plata Canyon and possibly to smaller canyons indentified in the bathymetric data. The location of the canyons might be controlled by tectonics. In contrast, many morphological features (e.g. progradational terraces and slope parallel scarps with scour-geometries) reveal that sediment transport is predominantly influenced/controlled by strong contour bottom currents. This suggests a significant impact of the western boundary currents on the overall architectural evolution of the margin. Future studies using the acquired geophysical, sedimentological, physical property and geochemical data will (i) quantify the relative contribution of gravitational down-slope vs. along-slope processes through time in shaping this ocean margin and how it relates to the global ocean circulation pattern and sea-level change through time, (ii) investigate depositional and post-depositional processes and how they control submarine slope stability and submarine landslide initiation and (iii) explore the interaction and relative contribution of the various processes in controlling margin evolution, sediment dynamics and geohazard off Uruguay and Northern Argentina

Late Quaternary climatic events and sea-level changes recorded by turbidite activity, Dakar Canyon, NW Africa

The relationship of sea-level changes and short-term climatic changes with turbidite deposition is poorly documented, although the mechanisms of gravity-driven sediment transport in submarine canyons during sea-level changes have been reported from many regions. This study focuses on the activity of the Dakar Canyon off southern Senegal in response to major glacial/interglacial sea-level shifts and variability in the NW-African continental climate. The sedimentary record from the canyon allows us to determine the timing of turbidite events and, on the basis of XRF-scanning element data, we have identified the climate signal at a sub-millennial time scale from the surrounding hemipelagic sediments. Over the late Quaternary the highest frequency in turbidite activity in the Dakar Canyon is confined to major climatic terminations when remobilisation of sediments from the shelf was triggered by the eustatic sea-level rise. However, episodic turbidite events coincide with the timing of Heinrich events in the North Atlantic. During these times continental climate has changed rapidly, with evidence for higher dust supply over NW Africa which has fed turbidity currents. Increased aridity and enhanced wind strength in the southern Saharan–Sahelian zone may have provided a source for this dust

Evolution of a high-latitude sediment drift inside a glacially-carved trough based on high-resolution seismic stratigraphy (Kveithola, NW Barents Sea)

Rebesco, Michele ... et al.-- Special Issue: PAST Gateways (Palaeo-Arctic Spatial and Temporal Gateways).-- 16 pages, 12 figures, 2 tables, supplementary data http://dx.doi.org/10.1016/j.quascirev.2016.02.007Kveithola is a glacially-carved, E-W trending trough located in the NW Barents Sea, an epicontinental shelf sea of the Arctic Ocean located off northern Norway and Russia. A set of confined sediment drifts (the “Kveithola Drift”) is located in the inner part of the trough. In general, drift deposits are commonly characterized by high lateral continuity, restricted occurrence of hiatuses and relatively high accumulation rates, and thus represent excellent repositories of paleo-environmental information. We provide for the first time a detailed morphological and seismostratigraphic insight into this sediment drift, which is further supported by some preliminary lithological and sedimentological analyses. The complex morphology of the drift, imaged by combining all available multibeam data, includes a main and a minor drift body, two drift lenses in the outer part of the trough, more or less connected drift patches in the innermost part and small perched sediment patches in a structurally-controlled channel to the north. The seismic (PARASOUND) data show that the main and minor drift bodies are mainly well-stratified, characterized by sub-parallel reflections of moderate to high amplitude and good lateral continuity. The reflectors show an abrupt pinch-out on the northern edge where a distinct moat is present, and a gradual tapering to the south. Internally we identify the base of the drift and four internal horizons, which we correlate throughout the drift. Two units display high amplitude reflectors, marked lensoidal character and restricted lateral extent, suggesting the occurrence of more energetic sedimentary conditions. Facies typical for contourite deposition are found in the sediment cores, with strongly bioturbated sediments and abundant silty/sandy mottles that contain shell fragments. These characteristics, along with the morphological and seismic information, suggest a strong control by a bottom current flowing along the moat on the northern edge of the drift. Though both Atlantic and Arctic waters are known to enter the trough, from the west and the north respectively, brine-enriched shelf water (BSW) produced during winter and flowing westward in the moat, is suggested to be responsible for the genesis of the Kveithola Drift. The formation of BSW is inferred to have started around 13 cal ka BP, the onset of drift deposition, suggesting that conditions leading to atmospheric cooling of the surface waters and/or the presence of coastal polynyas and wind or floating ice shelves have persisted on the western Barents Shelf since that time. The units inferred to have been deposited under more energetic sedimentary conditions (tentatively dated to the Younger Dryas and to 8.9–8.2 cal ka BP) are suggestive of stronger BSW formation. In general, we infer that variations in the bottom current regime were mainly related to BSW formation due to atmospheric changes. They could also have been a response to successive episodes of grounded and sea ice retreat that allowed for a first limited, later open shelf current, which progressively established on the western Barents Sea shelfThe research cruise MSM30 CORIBAR and this study were partly funded through the MARUM DFG-Research Center/Cluster of Excellence “The Ocean in the Earth System” as part of MARUM project SD-2. This study contributes to the IPY initiative 367 NICESTREAM (Neogene Ice Streams and Sedimentary Processes on High- Latitude Continental Margins). The work was funded by the Italian projects OGS-EGLACOM, PNRA-CORIBAR-IT (PdR 2013/C2.01), ARCA (grant n. 25_11_2013_973) and PNRA-VALFLU, by the Council of Norway through its Centres of Excellence funding scheme (project number 223259), by the Spanish projects DEGLABAR (CTM2010-17386) and CORIBAR-ES (CTM2011-14807-E) funded by the “Ministerio de Economia y Competitividad”. The “Generalitat de Catalunya” is acknowledged for support through an excellence research group grant (2014SGR940). J.L. was funded by an FPI grant BES-2011-043614Peer Reviewe

The record of a high-energy event in a mud entrapment on the inner shelf off the Guadiana river

Recent environmental changes associated with high-energy events and human impacts were investigated in a mud entrapment confined in the paleo-Guadiana incised valley. Those changes were recorded in a gravity core during the last 2500 years. An erosional event seems to have occurred at ca. 500 cal yr BP but it is not clear how much sediment was removed. This event was followed by an increase in river discharges until ca. 465 cal yr BP while the benthic foraminiferal faunas were dominated by species associated with shallow-water sandy sediments. Upward, sedimentological and benthic foraminiferal variations indicated environmental changes, promoted by variable sediment supplies to the shelf.info:eu-repo/semantics/publishedVersio

Sea-level constraints on the amplitude and source distribution of Meltwater Pulse 1A.

During the last deglaciation, sea levels rose as ice sheets retreated. This climate transition was punctuated by periods of more intense melting; the largest and most rapid of these—Meltwater Pulse 1A—occurred about 14,500 years ago, with rates of sea-level rise reaching approximately 4 m per century1, 2, 3. Such rates of rise suggest ice-sheet instability, but the meltwater sources are poorly constrained, thus limiting our understanding of the causes and impacts of the event4, 5, 6, 7. In particular, geophysical modelling studies constrained by tropical sea-level records1, 8, 9 suggest an Antarctic contribution of more than seven metres, whereas most reconstructions10 from Antarctica indicate no substantial change in ice-sheet volume around the time of Meltwater Pulse 1A. Here we use a glacial isostatic adjustment model to reinterpret tropical sea-level reconstructions from Barbados2, the Sunda Shelf3 and Tahiti1. According to our results, global mean sea-level rise during Meltwater Pulse 1A was between 8.6 and 14.6 m (95% probability). As for the melt partitioning, we find an allowable contribution from Antarctica of either 4.1 to 10.0 m or 0 to 6.9 m (95% probability), using two recent estimates11, 12 of the contribution from the North American ice sheets. We conclude that with current geologic constraints, the method applied here is unable to support or refute the possibility of a significant Antarctic contribution to Meltwater Pulse 1A

Cambios históricos en el aporte terrígeno de la cuenca del Río de la Plata sobre la plataforma interna Uruguaya

El Río de la Plata (RdlP) presenta significativas variaciones naturales (hidrodinámicas y oceanográficas) asociadas a diferentes condiciones climáticas. El propósito de este trabajo es inferir los cambios de aportes continentales de sedimentos y su relación con las variaciones hidrológicas del Río de la Plata, a través del análisis de proxies sedimentológicos y geoquímicos en testigos de sedimentos de la plataforma interna uruguaya que registran los últimos 100 años, aproximadamente. A partir de ladatación por 210Pb de dos testigos de sedimentos (GeoB 13813-4 y BAR1) se reconstruyó la geocronología del ambiente, y se relacionó con datos de las forzantes climáticas Pacific Decadal Oscillation, El Niño/La Niña Southern Oscillation, Atlantic MultidecadalOscillation, y las anomalías hidrológicas de los ríos Paraná y Uruguay. Los valores máspositivos y estables del Southern Oscillation Index, los cuales corresponden a fases La Niña,se observan en el periodo correspondiente entre 1910-1970, respecto al resto de la serie,donde se aprecia una mayor variabilidad y una tendencia hacia valores más negativos(eventos El Niño). Se hicieron dendrogramas (clustering) jerárquicos para ambos testigos. Para el testigo GeoB 13813-4, se utilizó la relación Ca/Ti y la granulometría, mientras que para BAR1 se recurrió a variables granulométricas y la tasa de sedimentación. El mayoraporte continental hacia la región de la plataforma adyacente al Río de la Plata registrado a partir del año 1970, podría ser el factor principal de los agrupamientos observados en los clusters para ambos testigos. Las agrupaciones mostraron una diferenciación en la década de 1970 lo que estaría asociado al aumento de los caudales de los ríos Paraná y Uruguay, durante las últimas tres décadas del siglo XX. Por otra parte se observa que la granulometría del testigo BAR1 presentó un mayor tamaño de grano y más variabilidad que en el caso del testigo GeoB 13813-4. También se determinó una mayor acumulación de sedimentos a través del tiempo en el cinturón de barro del Río de la Plata (plataforma continental adyacente), comparado con aquel registrado en la Barra del Indio (límite entre zona intermedia y externa del estuario). Estas diferencias podrían estar relacionadas con la influencia del Río de la Plata la cual genera un ambiente altamente dinámico sobre la Barra del Indio y un ambiente más estable sobre el cinturón de barro en la plataforma continental.Fil: Marrero, Analía. Universidad de la República. Facultad de Ciencias; UruguayFil: Tudurí, Adriana. Universidad de la República. Facultad de Ciencias; UruguayFil: Perez, Laura. Universidad de la República. Facultad de Ciencias; UruguayFil: Cuña Rodriguez, Carolina Celeste. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro de Investigaciones en Ciencias de la Tierra. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Centro de Investigaciones en Ciencias de la Tierra; ArgentinaFil: Muniz, Pablo. Universidad de la República. Facultad de Ciencias; UruguayFil: Lopes Figueira, Rubens C.. Instituto Oceanografico; BrasilFil: Michcelovitch de Mahiques, Michel. Instituto Oceanografico; BrasilFil: Alves de Lima Ferreira, Paulo. Instituto Oceanografico; BrasilFil: Pittauerová, Daniela. Center For Marine Environmental Sciences, Marum; AlemaniaFil: Hanebuth, Till. Center For Marine Environmental Sciences, Marum; AlemaniaFil: Garcia Rodriguez, Felipe. Universidad de la República. Facultad de Ciencias; Urugua

Laserstrahlhartlöten mit Zweistrahltechnik

The aim of this thesis is to obtain basic knowledge about automated and flux free laser beam brazing of formed sheet metal parts with double beam. The brazing system was composed of two Nd:YAG-lasers, a 6-axis-articulated robot as well as a filler metal and a shielding gas supply. In addition an online process control was developed, based on the detection of the surface temperature. In fundamental investigations of the process the arrangement of the laser beams as well as of the filler metal and the shielding gas supply were optimized. Intensive studies of the joint quality have shown good results concerning wetting and filling degree. Besides small thermal distortion occurred and high strength could be obtained. Applying two laser beam sources allows a controlled and separate in-coupling of the laser beam energy for each part of the joint. Thus different temperature profiles at the joints investigated can be optimal designed through the variation of focal position, angle of beam incidence and the arrangement of the laser beam working spots to the joint or the gap. The laser beam brazing technique presented delivers basic knowledge for the realization in industry.Das Ziel der Arbeit war es, grundlegendes Wissen über das flußmittelfreie und automatisierte Laserstrahlhartlöten von Blechformteilen mit Zweistrahltechnik zu erarbeiten. Es wurde ein Hartlötsystem bestehend aus zwei Nd:YAG-Lasern, einem 6-Achsen-Gelenkarmroboter sowie einer Lotdraht und Schutzgaszuführung aufgebaut. Die entwickelte online Prozeßregelung, basierend auf der Erfassung der Blechoberflächentemperatur, ergänzte die Anlage. In den grundlegenden Untersuchungen zur Prozeßführung wurde die Anordnung der Laserstrahlen zum Verbindungsstoß sowie die Lot- und Schutzgaszuführung für die Zweistrahltechnik optimiert. Die eingehende Untersuchung der Verbindungseigenschaften insbesondere auch räumlich orientierter Nähte zeigte, daß sehr gute Verbindungsqualitäten hinsichtlich Benetzungen und Füllgrad im Spalt sowie geringer Verzug und hohe Festigkeiten erzielt werden können. Die Verwendung von zwei Laserstrahlquellen, die unabhängig voneinander in ihrer Ausgangsleistung geregelt werden können, erlaubt eine gezielte und für beide Stoßpartner separate Energieeinbringung. Dadurch lassen sich Temperaturprofile für verschiedene Stoßformen über die Fokuslagen, die Einstrahlwinkel und die Anordnung der Laserstrahlwirkflächen zum Spalt optimal einstellen. Das vorgestellte Laserstrahlhartlötverfahren schafft damit eine Basis für eine industrielle Umsetzung der räumlichen Hartlötbearbeitung von Blechformteilen