Biomolecular motor-driven molecular sorter

We have developed a novel, microfabricated, stand-alone microfluidic device that can efficiently sort and concentrate (bio-)analyte molecules by using kinesin motors and microtubules as a chemo-mechanical transduction machine. The device removes hundreds of targeted molecules per second from an analyte stream by translocating functionalized microtubules with kinesin across the stream and concentrating them at a horseshoe-shaped collector. Target biomolecule concentrations increase up to three orders of magnitude within one hour of operation.close191

Thermal modulation for gas chromatography

A thermal modulator device for gas chromatography and associated methods. The thermal modulator device includes a recirculating fluid cooling member, an electrically conductive capillary in direct thermal contact with the cooling member, and a power supply electrically coupled to the capillary and operable for controlled resistive heating of the capillary. The capillary can include more than one separate thermally modulated sections

Improved Thermal Modulator for Gas Chromatography

An improved thermal modulator has been invented for use in a variant of gas chromatography (GC). The variant in question denoted as two-dimensional gas chromatography (2DGC) or GC-GC involves the use of three series-connected chromatographic columns, in the form of capillary tubes coated interiorly with suitable stationary phases (compounds for which different analytes exhibit different degrees of affinity). The two end columns are relatively long and are used as standard GC columns. The thermal modulator includes the middle column, which is relatively short and is not used as a standard GC column: instead, its temperature is modulated to affect timed adsorption and desorption of analyte gases between the two end columns in accordance with a 2DGC protocol

Photochemical routes to silicon epitaxy

The photochemistry of Si2H6 adsorbed on a hydrogen terminated silicon surface and the subsequentreactions of the photolysis products were investigated using high resolution electron energy lossspectroscopy and by measuring time-of-flight distributions with a mass spectrometer. The crackingpattern of the products ejected directly into the gas phase without colliding with either the surfaceor other molecules indicates that the primary photolysis channels yield mostly fragments thatcontain one silicon atom. It is likely that silicon is added to the surface by insertion of SiH2 radicalsinto Si–H bonds at the surface but there is little evidence for reactions that remove excess hydrogenfrom the surface at 110

Hydrogen adsorption on and desorption from Si: Considerations on the applicability of detailed balance

The translational energy of D2 desorbed from Si(100) and Si(111) surfaces was measured and found roughly equal to the thermal expectation at the surface temperature Ts. Combining these results with previously measured internal state distributions, the total energy of the desorbed molecules is approximately equal to the equilibrium expectation at Ts. Thus adsorption experiments, which suggest a large energetic barrier, are at variance with desorption experiments, which exhibit a trivial adsorption barrier, and the applicability of detailed balance for this system needs to be reexamined

The adsorbate state specific photochemistry of dioxygen on Pd(111)

The ultraviolet‐photochemistry of molecularly adsorbed oxygen on Pd(111) has been studied using pulsed laser light with 6.4 eV photon energy. Three processes occur upon irradiation: desorption of molecular oxygen, conversion between adsorption states, and dissociation to form adsorbed atomic oxygen. By using time‐of‐flight spectroscopy to detect the desorbing molecular oxygen and post‐irradiation thermal desorption spectroscopy (TDS) to characterize the adsorbate state, a detailed picture of the photochemical processes is obtained. The data indicate that the O2 molecules desorbing with low translational energies from the saturated surface as well as the conversion of adsorbed molecules between binding states are induced by the photoinduced build‐up of atomic oxygen on the surface. Analysis of a proposed reaction model reproduces the observed data and yields detailed rates. Polarization analysis indicates that the photochemical processes are initiated by electronic excitations of the substrate

Beam investigations of D2 adsorption on Si(100): On the importance of lattice excitations in the reaction dynamics

The adsorption of D2 on Si(100) has been investigated by means of supersonic molecular beam techniques. We have succeeded in measuring the dependence of the molecular D2 sticking coefficient S on surface temperature Ts and nozzle temperature Tn. The sticking coefficient increases gradually in the range 300≤Tn≤1040 K. The influence of increased v=1 population has not been deconvoluted from the effects of translational energy alone. The dependence on Ts is more interesting. With an incident translational energy of 65 meV, S rises from a value insignificantly different from the background level to a maximum value of (1.5±0.1)×10−5 at Ts=630 K. The decrease in the effective sticking coefficient beyond this Ts is the result of desorption during the experiment. Having established that S increases with both increasing molecular energy and increasing sample temperature, we have demonstrated directly for the first time that the adsorption of molecular hydrogen on Si is activated and that lattice vibrational excitations play an important role in the adsorption process

Catalytic Thermal Decomposition of NO2 by Iron(III) Nitrate Nonahydrate-Doped Poly(Vinylidene Difluoride)

The products of thermal decomposition of iron nitrate nonahydrate doped into poly(vinylidene difluoride) are examined using Mössbauer spectroscopy. Very little of the expected nitrogen dioxide product is observed, which is attributed to Fe3+ catalysis of the decomposition of NO2. The active site of the catalysis is shown to be Fe(OH)3 in the polymer matrix, which is, unexpectedly, reduced to Fe(OH)2. Thermodynamic calculations show that the reduction of Fe3+ is exergonic at sufficiently high temperatures. A reaction sequence, including a catalytic cycle for decomposition of NO2, is proposed that accounts for the observed reaction products. The role of the polymer matrix is proposed to inhibit transport of gas-phase products, which allows them to interact with Fe(OH)3 doped in the polymer

Ultraviolet‐laser induced dissociation and desorption of water adsorbed on Pd(111)

Ultraviolet‐laser irradiation (6.4 eV and 5.0 eV) of the first layer of water adsorbed on a Pd(111) surface at 90 K leads to desorption of H2O and to conversion of the adsorbed state as manifested in the thermal desorption spectra. The latter effect is attributed to photodissociation of water on the surface. Time‐of‐flight measurements show that water molecules desorb with the same translational energy of about 600 K for both photon energies. While desorption is suppressed with adsorbed multilayers, conversion within the first layer still proceeds