Theoretical Evaluations of the Fission Cross Section of the 77 eV Isomer of 235-U

We have developed models of the fission barrier (barrier heights and transition state spectra) that reproduce reasonably well the measured fission cross section of $^{235}$U from neutron energy of 1 keV to 2 MeV. From these models we have calculated the fission cross section of the 77 eV isomer of $^{235}$U over the same energy range. We find that the ratio of the isomer cross section to that of the ground state lies between about 0.45 and 0.55 at low neutron energies. The cross sections become approximately equal above 1 MeV. The ratio of the neutron capture cross section to the fission cross section for the isomer is predicted to be about a factor of 3 larger for the isomer than for the ground state of $^{235}$U at keV neutron energies. We have also calculated the cross section for the population of the isomer by inelastic neutron scattering form the $^{235}$U ground state. We find that the isomer is strongly populated, and for $E_n = 1 MeV$ the $(n,n'\gamma)$ cross section leading to the population of the isomer is of the order of 0.5 barn. Thus, neutron reaction network calculations involving the uranium isotopes in a high neutron fluence are likely to be affected by the 77 eV isomer of $^{235}$U. With these same models the fission cross sections of $^{233}$U and $^{237}$U can be reproduced approximately using only minor adjustments to the barrier heights. With the significant lowering of the outer barrier that is expected for the outer barrier the general behavior of the fission cross section of $^{239}$Pu can also be reproduced.Comment: 17 pages including 8 figure

The impact of carcase estimated breeding values on yield and quality of sheep meat

The aims of this study were to investigate the impact of carcase estimated breeding values on carcase size and lean meat yield of lambs and to determine whether nutrition alters these responses. Selection for high estimated breeding values for growth increased carcase size by as much as 4 kg in lambs fed a high plane of nutrition. On a low plane of nutrition, this effect was reduced by 60%, highlighting the importance of nutrition for realizing the potential of this trait. Selection for estimated breeding values for muscling reduced total carcase fatness by 3% in lambs fed at a low plane of nutrition and by 10% in lambs fed at a high plane of nutrition, resulting in an increase in lean meat yield and improved economic returns for sales based on a lean-meat-yield grid. Selecting for estimated breeding values for low fat depth reduced total carcase fatness by 4%; this effect was the same whether lambs were maintained on high or low planes of nutrition. Other aspects of meat quality maybe influenced by using sires selected for muscling. Meat tenderness may be reduced due to greater connective tissue content, but it is likely that this can be controlled by concurrent selection for growth. Juiciness and flavour may be reduced due to reduced intramuscular fat content, but this can be attenuated by nutritional practices and, in the longer term, by alleviating the negative selection for fatness. Selection for a combination of muscling and growth estimated breeding values in terminal sires is an excellent way to increase both carcase size and lean meat yield of lambs - and to provide greater returns for producers

The effect of lamb carcase weight and GR depth on the production of value-added cuts – A short communication

Times for the progressive breakdown of 95 lamb carcases were recorded to determine the impact of carcase weight and GR tissue depth on the time and therefore cost to produce value added retail cuts. Further analysis also assessed the potential to use these carcase traits as predictors of fabrication times. Regression modeling demonstrated there was a limited ability to predict the difference in time to fabricate mid value-added (R2 = 0.18) and extreme value-added (R2 = 0.12) cuts compared to traditional cuts, suggesting that other factors need to be considered. However, this study highlighted the significant increases in time required to fabricate more value-added cuts and to breakdown heavier carcases. Furthermore, this study demonstrated the changes to the saleable meat yield as the degree of fabrication increased, such that the average product prices increased ($20.64/kg for mid value added and$28.72/kg for extreme value added) compared to traditional retail cuts ($15/kg) to offset the increased labour of fabricating value-added cuts

Nonintrusive electron number density measurements in the plume of a 1 kW arcjet using a modern microwave interferometer

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/77090/1/AIAA-1994-3297-662.pd

Masculinities, affect and the (re)place(ment) of stardom in Formula One fan leisure practices

Writing from an autoethnographic perspective, this article explores male leisure practices via the mediated relationships fans enter into with stars. More specifically, my own fandom for Formula One driver Jacques Villeneuve is the locus of study, revealing how this affective investment shapes and furnishes my corresponding leisure practices. Notions of gendered 'performativity' come to the fore, with my own displays evoking, enacting and revealing oscillating performances of masculinity. Moreover, there are interesting gendered dynamics that such fan leisure practices flag in terms of the intersection of female/male relationships and the potential 'fantasy' and/or narcissistic readings that a male fan identifying with and performing as another male sport star afford. Finally, my research reveals paradoxes for contemporary masculinities, with fans reliant upon mediation and commodification to facilitate and sustain their performative roles. © 2011 Taylor & Francis

Measurement of the correlation between flow harmonics of different order in lead-lead collisions at √sNN = 2.76 TeV with the ATLAS detector

Correlations between the elliptic or triangular flow coefficients vm (m=2 or 3) and other flow harmonics vn (n=2 to 5) are measured using √sNN=2.76 TeV Pb+Pb collision data collected in 2010 by the ATLAS experiment at the LHC, corresponding to an integrated luminosity of 7 μb−1. The vm−vn correlations are measured in midrapidity as a function of centrality, and, for events within the same centrality interval, as a function of event ellipticity or triangularity defined in a forward rapidity region. For events within the same centrality interval, v3 is found to be anticorrelated with v2 and this anticorrelation is consistent with similar anticorrelations between the corresponding eccentricities, ε2 and ε3. However, it is observed that v4 increases strongly with v2, and v5 increases strongly with both v2 and v3. The trend and strength of the vm−vn correlations for n=4 and 5 are found to disagree with εm−εn correlations predicted by initial-geometry models. Instead, these correlations are found to be consistent with the combined effects of a linear contribution to vn and a nonlinear term that is a function of v22 or of v2v3, as predicted by hydrodynamic models. A simple two-component fit is used to separate these two contributions. The extracted linear and nonlinear contributions to v4 and v5 are found to be consistent with previously measured event-plane correlations

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements

Search for vectorlike B quarks in events with one isolated lepton, missing transverse momentum, and jets at √s = 8 TeV with the ATLAS detector

A search has been performed for pair production of heavy vectorlike down-type (B) quarks. The analysis explores the lepton-plus-jets final state, characterized by events with one isolated charged lepton (electron or muon), significant missing transverse momentum, and multiple jets. One or more jets are required to be tagged as arising from b quarks, and at least one pair of jets must be tagged as arising from the hadronic decay of an electroweak boson. The analysis uses the full data sample of pp collisions recorded in 2012 by the ATLAS detector at the LHC, operating at a center-of-mass energy of 8 TeV, corresponding to an integrated luminosity of 20.3 fb −1 . No significant excess of events is observed above the expected background. Limits are set on vectorlike B production, as a function of the B branching ratios, assuming the allowable decay modes are B → Wt/Zb/Hb. In the chiral limit with a branching ratio of 100% for the decay B → Wt, the observed (expected) 95% C.L. lower limit on the vectorlike B mass is 810 GeV (760 GeV). In the case where the vectorlike B quark has branching ratio values corresponding to those of an SU(2) singlet state, the observed (expected) 95% C.L. lower limit on the vectorlike B mass is 640 GeV (505 GeV). The same analysis, when used to investigate pair production of a colored, charge 5/3 exotic fermion T 5/3 , with subsequent decay T 5/3 → Wt, sets an observed (expected) 95% C.L. lower limit on the T 5/3 mass of 840 GeV (780 GeV)