Fluid Flow Equations for Rotordynamic Flows in Seals and Leakage Paths

Fluid-induced rotordynamic forces produced by the fluid in an annular seal or in the leakage passage surrounding the shroud of a pump or turbine, are known to contribute substantially to the potential excitation forces acting on the rotor. The present research explores some of the important features of the equations governing bulk-flow models of these flows. This in turn suggests methods which might be used to solve these bulk-flow equations in circumstances where the linearized solutions may not be accurate. This paper presents a numerical method for these equations and discusses comparison of the computed results with experimental measurements for annular seals and pump leakage paths

Polymers Confined between Two Parallel Plane Walls

Single three dimensional polymers confined to a slab, i.e. to the region between two parallel plane walls, are studied by Monte Carlo simulations. They are described by $N$-step walks on a simple cubic lattice confined to the region $1 \le z \le D$. The simulations cover both regions $D > R_F$ (where $R_F \sim N^\nu$ is the Flory radius, with $\nu \approx 0.587$), as well as the cross-over region in between. Chain lengths are up to $N=80,000$, slab widths up to D=120. In order to test the analysis program and to check for finite size corrections, we actually studied three different models: (a) Ordinary random walks (mimicking $\Theta$-polymers); (b) Self-avoiding walks (SAW); and (c) Domb-Joyce walks with the self-repulsion tuned to the point where finite size corrections for free (unrestricted) chains are minimal. For the simulations we employ the pruned-enriched-Rosenbluth method (PERM) with Markovian anticipation. In addition to the partition sum (which gives us a direct estimate of the forces exerted onto the walls), we measure the density profiles of monomers and of end points transverse to the slab, and the radial extent of the chain parallel to the walls. All scaling laws and some of the universal amplitude ratios are compared to theoretical predictions.Comment: 8 pages, 14 figures include

New urea-absorbing polymers for artificial kidney machines

Etherified polymer is made from modified cellulose derivative which is reacted with periodate. It will absorb 2 grams of urea per 100 grams of polymer. Indications are that polymers could be used to help remove uremic wastes in artificial kidneys, or they could be administered orally as therapy for uremia

Reduction for constrained variational problems on 3D null curves

We consider the optimal control problem for null curves in de Sitter 3-space defined by a functional which is linear in the curvature of the trajectory. We show how techniques based on the method of moving frames and exterior differential systems, coupled with the reduction procedure for systems with a Lie group of symmetries lead to the integration by quadratures of the extremals. Explicit solutions are found in terms of elliptic functions and integrals.Comment: 16 page

Effect of Swirl on Rotordynamic Forces Caused by Front Shroud Pump Leakage

Unsteady forces generated by fluid flow through the impeller shroud leakage path of a centrifugal pump were investigated. The effect of leakage path inlet swirl (pump discharge swirl) on the rotordynamic forces was re-examined. It was observed that increasing the inlet swirl is destabilizing both for normal and tangential rotordynamic forces. Attempts to reduce the swirl within the leakage path using ribs and grooves as swirl brakes showed benefits only at low leakage flow rate

Topological density wave states of non-zero angular momentum

The pseudogap state of high temperature superconductors is a profound mystery. It has tantalizing evidence of a number of broken symmetry states, not necessarily conventional charge and spin density waves. Here we explore a class of more exotic density wave states characterized by topological properties observed in recently discovered topological insulators. We suggest that these rich topological density wave states deserve closer attention in not only high temperature superconductors but in other correlated electron states, as in heavy fermions.Comment: Expanded version, 7 pages, 6 figure

Association Between Blood Pressure and Adverse Renal Events in Type 1 Diabetes.

ObjectiveTo compare different blood pressure (BP) levels in their association with the risk of renal outcomes in type 1 diabetes and to determine whether an intensive glycemic control strategy modifies this association.Research design and methodsWe included 1,441 participants with type 1 diabetes between the ages of 13 and 39 years who had previously been randomized to receive intensive versus conventional glycemic control in the Diabetes Control and Complications Trial (DCCT). The exposures of interest were time-updated systolic BP (SBP) and diastolic BP (DBP) categories. Outcomes included macroalbuminuria (>300 mg/24 h) or stage III chronic kidney disease (CKD) (sustained estimated glomerular filtration rate <60 mL/min/1.73 m2).ResultsDuring a median follow-up time of 24 years, there were 84 cases of stage III CKD and 169 cases of macroalbuminuria. In adjusted models, SBP in the <120 mmHg range was associated with a 0.59 times higher risk of macroalbuminuria (95% CI 0.37-0.95) and a 0.32 times higher risk of stage III CKD (95% CI 0.14-0.75) compared with SBPs between 130 and 140 mmHg. DBP in the <70 mmHg range were associated with a 0.73 times higher risk of macroalbuminuria (95% CI 0.44-1.18) and a 0.47 times higher risk of stage III CKD (95% CI 0.21-1.05) compared with DBPs between 80 and 90 mmHg. No interaction was noted between BP and prior DCCT-assigned glycemic control strategy (all P > 0.05).ConclusionsA lower BP (<120/70 mmHg) was associated with a substantially lower risk of adverse renal outcomes, regardless of the prior assigned glycemic control strategy. Interventional trials may be useful to help determine whether the currently recommended BP target of 140/90 mmHg may be too high for optimal renal protection in type 1 diabetes

Lacie phase 1 Classification and Mensuration Subsystem (CAMS) rework experiment

An experiment was designed to test the ability of the Classification and Mensuration Subsystem rework operations to improve wheat proportion estimates for segments that had been processed previously. Sites selected for the experiment included three in Kansas and three in Texas, with the remaining five distributed in Montana and North and South Dakota. The acquisition dates were selected to be representative of imagery available in actual operations. No more than one acquisition per biophase were used, and biophases were determined by actual crop calendars. All sites were worked by each of four Analyst-Interpreter/Data Processing Analyst Teams who reviewed the initial processing of each segment and accepted or reworked it for an estimate of the proportion of small grains in the segment. Classification results, acquisitions and classification errors and performance results between CAMS regular and ITS rework are tabulated