Sponge-Inspired Dibromohemibastadin Prevents and Disrupts Bacterial Biofilms without Toxicity

Since the banning of several families of compounds in antifouling (AF) coatings, the search for environmentally friendly AF compounds has intensified. Natural sources of AF compounds have been identified in marine organisms and can be used to create analogues in laboratory. In a previous study, we identified that dibromohemibastadin-1 (DBHB) is a promising AF molecule, leading to the inhibition of the activity of phenoloxidase, an enzyme involved in the attachment of mussels to surfaces. This paper describes the activity of the DBHB on biofilm formation and its detachment and on bacterial adhesion and communication: quorum sensing. DBHB has an anti-biofilm activity without affecting adhesion of marine and terrestrial bacteria at a dose of 10 µM. Moreover, DBHB activity on quorum sensing (QS) is demonstrated at doses of 8 and 16 µM. The activity of DBHB on QS is compared to kojic acid, a quorum sensing inhibitor already described. This compound is a promising environmentally friendly molecule potentially useful for the inhibition of microfouling

No effect of glutamine supplementation and hyperoxia on oxidative metabolism and performance during high-intensity exercise.

addresses: Health and Biology, Liverpool Hope University, Liverpool, UK. [email protected]: Comparative Study; Journal ArticleThis is an Author's Accepted Manuscript of an article published in Journal of Sports Sciences, 2008, Vol. 26, Issue 10, pp. 1081 – 1090 © 2008 copyright Taylor & Francis, available online at: http://www.tandfonline.com/doi/abs/10.1080/02640410801930200Glutamine enhances the exercise-induced expansion of the tricarboxylic acid intermediate pool. The aim of the present study was to determine whether oral glutamine, alone or in combination with hyperoxia, influenced oxidative metabolism and cycle time-trial performance. Eight participants consumed either placebo or 0.125 g kg body mass(-1) of glutamine in 5 ml kg body mass(-1) placebo 1 h before exercise in normoxic (control and glutamine respectively) or hyperoxic (FiO(2) = 50%; hyperoxia and hyperoxia + glutamine respectively) conditions. Participants then cycled for 6 min at 70% maximal oxygen uptake (VO(2max)) immediately before completing a brief high-intensity time-trial (approximately 4 min) during which a pre-determined volume of work was completed as fast as possible. The increment in pulmonary oxygen uptake during the performance test (DeltaVO(2max), P = 0.02) and exercise performance (control: 243 s, s(x) = 7; glutamine: 242 s, s(x) = 3; hyperoxia: 231 s, s(x) = 3; hyperoxia + glutamine: 228 s, s(x) = 5; P < 0.01) were significantly improved in hyperoxic conditions. There was some evidence that glutamine ingestion increased DeltaVO(2max) in normoxia, but not hyperoxia (interaction drink/FiO(2), P = 0.04), but there was no main effect or impact on performance. Overall, the data show no effect of glutamine ingestion either alone or in combination with hyperoxia, and thus no limiting effect of the tricarboxylic acid intermediate pool size, on oxidative metabolism and performance during maximal exercise

Test beam results of a stereo preshower integrated in the liquid argon accordion calorimeter

This paper describes the construction of an integrated preshower within the RD3 liquid argon accordion calorimeter. It has a stereo view which enables the measurement of two transverse coordinates. The prototype was tested at CERN with electrons, photons and muons to validate its capability to work at LHC ( Energy resolution, impact point resolution, angular resolution, $\pi^o$/$\gamma$ rejection )

Construction and test of a fine-grained liquid argon preshower prototype

A separate liquid argon preshower detector consisting of two layers featuring a fine granularity of 2.5~10$^{\mathrm{-3}}$ was studied by the RD3 collaboration. A prototype covering approximately 0.8 in pseudo-rapidity and 9 degrees in azimuth was built and tested at CERN in July 94. CMOS and GaAs VLSI preamplifiers were designed and tested for this occasion. The combined response of this detector and an accordion electromagnetic calorimeter prototype to muons, electrons and photons is presented. For minimum ionizing tracks a signal-to-noise ratio of 4.5 per preshower layer was measured. Above 150~GeV the space resolution for electrons is better than 250~$\mu$m in both directions. The precision on the electromagnetic shower direction, determined together with the calorimeter, is better than 4 mrad above 50~GeV. It is concluded that the preshower detector would adequately fulfil its role for future operation at CERN Large Hadron Collider

Results from a combined test of an electromagnetic liquid argon calorimeter with a hadronic scintillating-tile calorimeter

The first combined test of an electromagnetic liquid argon accordion calorimeter and a hadronic scintillating-tile calorimeter was carried out at the CERN SPS. These devices are prototypes of the barrel calorimeter of the future ATLAS experiment at the LHC. The energy resolution of pions in the energy range from 20 to 300~GeV at an incident angle $\theta$ of about 11$^\circ$ is well-described by the expression \sigma/E = ((46.5 \pm 6.0)\%/\sqrt{E} +(1.2 \pm 0.3)\%) \oplus (3.2 \pm 0.4)~\mbox{GeV}/E. Shower profiles, shower leakage, and the angular resolution of hadronic showers were also studied

Construction and test of a fine-grained liquid argon preshower prototype

A separate liquid argon preshower detector consisting of two layers featuring a fine granularity of 2.5~10$^{\mathrm{-3}}$ was studied by the RD3 collaboration. A prototype covering approximately 0.8 in pseudo-rapidity and 9 degrees in azimuth was built and tested at CERN in July 94. CMOS and GaAs VLSI preamplifiers were designed and tested for this occasion. The combined response of this detector and an accordion electromagnetic calorimeter prototype to muons, electrons and photons is presented. For minimum ionizing tracks a signal-to-noise ratio of 4.5 per preshower layer was measured. Above 150~GeV the space resolution for electrons is better than 250~$\mu$m in both directions. The precision on the electromagnetic shower direction, determined together with the calorimeter, is better than 4 mrad above 50~GeV. It is concluded that the preshower detector would adequately fulfil its role for future operation at CERN Large Hadron Collider

Test beam results of a stereo preshower integrated in the liquid argon accordion calorimeter

This paper describes the construction of an integrated preshower within the RD3 liquid argon accordion calorimeter. It has a stereo view which enables the measurement of two transverse coordinates. The prototype was tested at CERN with electrons, photons and muons to validate its capability to work at LHC (Energy resolution, impact point resolution, angular resolution, π o γ rejection). (Elsevier

A dataset of acoustic measurements from soundscapes collected worldwide during the COVID-19 pandemic

Political responses to the COVID-19 pandemic led to changes in city soundscapes around the globe. From March to October 2020, a consortium of 261 contributors from 35 countries brought together by the Silent Cities project built a unique soundscape recordings collection to report on local acoustic changes in urban areas. We present this collection here, along with metadata including observational descriptions of the local areas from the contributors, open-source environmental data, open-source confinement levels and calculation of acoustic descriptors. We performed a technical validation of the dataset using statistical models run on a subset of manually annotated soundscapes. Results confirmed the large-scale usability of ecoacoustic indices and automatic sound event recognition in the Silent Cities soundscape collection. We expect this dataset to be useful for research in the multidisciplinary field of environmental sciences

Conductive polymer composites: comparative study of poly(ester)-short carbon fibres and poly(epoxy)-short carbon fibres mechanical and electrical properties

International audienceThe effect of the addition of short carbon fibres (SCF) on the mechanical and electrical properties of conductive polymer composites (CPC) with poly(ester) and poly(epoxy) matrices has been studied. The reinforcement effect of (SCF) filled thermosets CPC is more important with poly(epoxy) than with poly(ester) matrix. Electrical measurements show a small amplitude PTC effect between 90 and 160 degreesC. The percolation threshold is reached for about 1% v/v SCF and higher conductivity is obtained with poly(ester) matrix. Up to 3% v/v, a good correlation is found between resistivity and relative Young's modulus. (C) 2002 Elsevier Science B.V. All rights reserved