Triplex addressability as a basis for functional DNA nanostructures

Here, we present the formation of a fully addressable DNA nanostructure that shows the potential to be exploited as, for example, an information storage device based on pH-driven triplex strand formation or nanoscale circuits based on electron transfer, The nanostructure is composed of two adjacent hexagonal unit cells (analogous to naphthalene) in which each of the eleven edges has a unique double-stranded DNA sequence, constructed using novel three-way oligonucleotides. This allows each ten base-pair side, just 3.4 nm in length, to be assigned a specific address according to its sequence. Such constructs are therefore an ideal precursor to a nonrepetitive two-dimensional grid on which the "addresses" are located at a precise and known position. Triplex recognition of these addresses could function as a simple yet efficient means of information storage and retrieval. Future applications that may be envisaged include nanoscale circuits as well as subnanometer precision in nanoparticle templating. Characterization of these precursor nanostructures and their reversible targeting by triplex strand formation is shown here using gel electrophoresis, atomic force microscopy, and fluorescence resonance energy transfer (FRET) measurements. The durability of the system to repeated cycling of pH switching is also confirmed by the FRET studies

Perovskite solar cells using polymer electrolytes

This study deals with the characterization of methylammonium lead iodide (MAPbI3) material and the fabrication of perovskite solar cells using gel polymer electrolyte as the charge transport medium. The crystalline lead–based perovskite has been verified by x-ray diffraction (XRD). The [100], [200], [210], [211], [220], [300] and [222] reflection planes can be observed at 2θ angles of 14.10°, 28.35°, 31.90°, 34.95°, 40.40°, 43.15° and 50.20°, indicating a cubic crystal symmetry for CH3NH3PbI3. EDX spectrum showed a Pb:I ratio of approximately 1:3 as in CH3NH3PbI3. The band gap for lead-based perovskite is 1.45 eV estimated from UV-Vis absorption spectroscopy. The nanocrystalline MAPbI3 have been observed using field emission scanning electron microscopy (FESEM), where the average cuboid size of perovskite nanocrystals is 380 nm. The cell have been fabricated using gel polymer electrolyte with composition 17.02 wt.% PVA–13.93 wt.% TBAI–0.96 wt.% I2– 68.09 wt.% DMF. The cell exhibits a power conversion efficiency (PCE) of 1.28% with open circuit voltage (Voc) 0.58 mV, short circuit current density (Jsc) 3.74 mA cm−2 and fill factor (FF) 59.18%

The Designers Leap: Boundary Jumping to foster interdisciplinarity between Textile Design and Science

Creative thinking is an instinctive problem-solving process for designers however, designers alone cannot solve real-world problems. Collaboration between higher education and industry, and across design and science disciplines can create new paradigms of research to address societal and economic challenges. This paper argues from the perspective of fashion and textile designers, for design to be at the heart of the collaborative research process and advocates for co-design, speculative-design and scenario design to be considered as valid methodologies to foster interdisciplinarity. Perspectives on interdisciplinary partnerships across academic disciplines and with industry are typified by two very different reflections of collaborative projects between fashion designers, textile designers, scientists and industrial partners. The paper identifies commonalities and differences between scientists and designers, with particular relevance to textiles, in a bid to understand how they may collaborate more effectively in the context of interdisciplinary work, and the paper further identifies factors needed for establishing common enablers for engaging in co-design. This is an under-explored field and highlights the changing role of the designer, and as such is of value to researchers in textiles, fashion and product design

Polyacrylonitrile gel polymer electrolyte based dye sensitized solar cells for a prototype solar panel

Polyacrylonitrile (PAN) based gel polymer electrolytes (GPE) were prepared using lithium iodide (LiI), 1-butyl-3-methylimidazolium iodide (BMII) and tetrapropyl ammonium iodide (TPAI). The LiI mass fraction in the electrolyte was varied while keeping the masses of other components constant in order to enhance the solar cell performance. The addition of 4.61 wt.% LiI in the GPE increased the electrolyte room temperature ionic conductivity from (2.32 ± 0.02) to (3.91 ± 0.04) mS cm−1. The increase in conductivity with the addition of LiI salts was attributed to the increase in diffusion coefficient, mobility and number density of charge carriers as determined from Nyquist plot fitting. The incorporation of LiI salts in PAN-based GPE has enhanced the efficiency of the DSSC as expected. The best cell performance was obtained with an electrolyte containing 4.61 wt.% LiI sandwiched between a single mesoporous layer of TiO2 soaked in N3 dye sensitizer and a platinum counter electrode, which showed a power conversion efficiency (PCE) of (5.4 ± 0.1) % with a short circuit current density (Jsc) of (21.0 ± 1.1) mA cm−2, an open circuit voltage (Voc) of (0.48 ± 0.02) V and a fill factor (FF) of (53.4 ± 0.9) %. The DSSCs with 4.61 wt.% of LiI have been used to fabricate prototype solar panels for operating small devices. The panels were assembled using a number of cells, each having an area of 2 cm × 2 cm, connected in series and parallel. The panel, consisting of a set of eight cells in series which was connected in parallel with another set of eight cells in series, produces an average power conversion efficiency of (3.7 ± 0.2)% with a maximum output power of (17.1 ± 0.9) mW

Molecular dynamics simulations reveal that AEDANS is an inert fluorescent probe for the study of membrane proteins

Computer simulations were carried out of a number of AEDANS-labeled single cysteine mutants of a small reference membrane protein, M13 major coat protein, covering 60% of its primary sequence. M13 major coat protein is a single membrane-spanning, α-helical membrane protein with a relatively large water-exposed region in the N-terminus. In 10-ns molecular dynamics simulations, we analyze the behavior of the AEDANS label and the native tryptophan, which were used as acceptor and donor in previous FRET experiments. The results indicate that AEDANS is a relatively inert environmental probe that can move unhindered through the lipid membrane when attached to a membrane protein

Why can pulmonary vein stenoses created by radiofrequency catheter ablation worsen during and after follow-up ? A potential explanation

<p>Abstract</p> <p>Background</p> <p>Radiofrequency catheter ablation of excitation foci inside pulmonary veins (PV) generates stenoses that can become quite severe during or after the follow-up period. Since severe PV stenoses have most often disastrous consequences, it would be important to know the underlying mechanism of this temporal evolution. The present study proposes a potential explanation based on mechanical considerations.</p> <p>Methods</p> <p>we have used a mathematical-physical model to examine the cyclic increase in axial wall stress induced in the proximal (= upstream), non-stenosed segment of a stenosed pulmonary vein during the forward flow phases. In a representative example, the value of this increase at peak flow was calculated for diameter stenoses (DS) ranging from 1 to 99%.</p> <p>Results</p> <p>The increase becomes appreciable at a DS of roughly 30% and rise then strongly with further increasing DS value. At high DS values (e.g. > 90%) the increase is approximately twice the value of the axial stress present in the PV during the zero-flow phase.</p> <p>Conclusion</p> <p>Since abnormal wall stresses are known to induce damages and abnormal biological processes (e.g., endothelium tears, elastic membrane fragmentations, matrix secretion, myofibroblast generation, etc) in the vessel wall, it seems plausible that the supplementary axial stress experienced cyclically by the stenotic and the proximal segments of the PV is responsible for the often observed progressive reduction of the vessel lumen after healing of the ablation injury. In the light of this model, the only potentially effective therapy in these cases would be to reduce the DS as strongly as possible. This implies most probably stenting or surgery.</p

Leadership, staffing and quality of care in nursing homes

<p>Abstract</p> <p>Background</p> <p>Leadership and staffing are recognised as important factors for quality of care. This study examines the effects of ward leaders' task- and relationship-oriented leadership styles, staffing levels, ratio of registered nurses and ratio of unlicensed staff on three independent measures of quality of care.</p> <p>Methods</p> <p>A cross-sectional survey of forty nursing home wards throughout Norway was used to collect the data. Five sources of data were utilised: self-report questionnaires to 444 employees, interviews with and questionnaires to 13 nursing home directors and 40 ward managers, telephone interviews with 378 relatives and 900 hours of field observations. Separate multi-level analyses were conducted for quality of care assessed by relatives, staff and field observations respectively.</p> <p>Results</p> <p>Task-oriented leadership style had a significant positive relationship with two of the three quality of care indexes. In contrast, relationship-oriented leadership style was not significantly related to any of the indexes. The lack of significant effect for relationship-oriented leadership style was due to a strong correlation between the two leadership styles (<it>r </it>= 0.78). Staffing levels and ratio of registered nurses were not significantly related to any of the quality of care indexes. The ratio of unlicensed staff, however, showed a significant negative relationship to quality as assessed by relatives and field observations, but not to quality as assessed by staff.</p> <p>Conclusions</p> <p>Leaders in nursing homes should focus on active leadership and particularly task-oriented behaviour like structure, coordination, clarifying of staff roles and monitoring of operations to increase quality of care. Furthermore, nursing homes should minimize use of unlicensed staff and address factors related to high ratios of unlicensed staff, like low staff stability. The study indicates, however, that the relationship between staffing levels, ratio of registered nurses and quality of care is complex. Increasing staffing levels or the ratio of registered nurses alone is not likely sufficient for increasing quality of care.</p