The cubic period-distance relation for the Kater reversible pendulum

We describe the correct cubic relation between the mass configuration of a Kater reversible pendulum and its period of oscillation. From an analysis of its solutions we conclude that there could be as many as three distinct mass configurations for which the periods of small oscillations about the two pivots of the pendulum have the same value. We also discuss a real compound Kater pendulum that realizes this property.Comment: 25 pages 4figure

The effect of laser transformation notching on the controlled fracture of a high carbon (C70S6 ) steel

A high carbon (C70S6) steel has been laser surface treated using CO2 and Diode lasers in order to produce an embrittled region to act as a fracture notch. Such a process has been investigated as a precursor to the fracture splitting of automotive engine connecting rods. Microstructures of the treated regions have been examined and the fracture behaviour of notched samples has been quantified. Depending on the laser processing parameters used, the laser transformation notch (LTN) undergoes either solid state transformations or a mixture of melting and solid state transformations. The effect of LTN depth on the peak impact force, the crack initiation energy and Charpy fracture energy was investigated on a C70S6 carbon steel using an instrumented Charpy impact facility. It was reduced to a value < 3.5 J by a LTN of ~ 0.5 mm in depth. Fracture mechanics models indicate that such a LTN can behave in a similar way to a fatigue created crack used in fracture toughness testing ie the LTN behaves as a sharp crack. Obtaining a sharp crack effect from a LTN is attributable to a combination of: a) the presence of brittle martensite, b) intergranular cracking of favourably oriented columnar grains after melting with inclusions and defects at their boundaries, c) intergranular cracking of coarse grains produced by a high austenitising temperatures and d) minor or major cracks sometimes resulting in centre – line cracking which arises during solidification. LTN was thus shown to have the potential to lead to an effective means of obtaining consistent fracture splitting of connecting rods

Investigating the addition of collagen and its integrin binding sequence (RGD) to glass polyalkenoate; in terms of material and cellular properties to explore a more biocompatible method of root caries restoration

Placement of a restoration to treat root caries disrupts many tissues. There is scope for the restorative material to interact with these to augment reductions in micro leakage afforded by an adhesive restorative material.OBJECTIVES: 1) To investigate the effects of incorporating bioactive molecules into a glass polyalkenoate (GPA) 2) To quantify the changes in physical properties of the material.METHODS: Biocompatibility of the GPA cement (Chemfil Superior, Dentsply De Trey, Konstanz, Germany) in unmodified and modified forms was ascertained using cell culture techniques. The optimum concentration of bioactive components required to promote cell attachment was determined indirectly by quantification and localisation of the fibroblast marker vimentin. The properties of surface hardness, compressive strength and adhesive bond strength were also determined prior to and following addition of the bio-additives: collagen type I and a pentapeptide containing Arg-Gly-Asp (RGD).RESULTS: Addition of Type I Collagen (100μg/ml) and RGD (5mg/ml) to ChemFil Superior had no statistically significant effect upon the compressive strength and bond strength to bovine enamel but significantly (P&lt;0.05) increased the materials shore hardness. The addition of RGD to ChemFil Superior increased most the expression of vimentin, indicating that the cells had become more fibroblastic. This may be indicative of increased synthesis of extracellular matrix macromolecules with the potential to foster adhesion of the modified glass polyalkenoate to distracted gingival tissues.CONCLUSIONS: The results suggest that addition of bioactive molecules to GPA cement for subgingival restorations has potential clinical applications.CLINICAL SIGNIFICANCE: It is possible to envisage that the additions, as described in this paper, could foster the attachment of displaced gingival tissues to GPA restorative materials placed subgingivally where root caries has been treated. This would offer potential to form a seal around the restoration by the attached gingival tissues avoiding a periodontal pocket and depriving residual cariogenic bacteria of a nutrient supply. Further investigation of the effects upon other similar materials of such additions is warranted.</p

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

Measurement of D*+/- meson production in jets from pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

This paper reports a measurement of D*+/- meson production in jets from proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV at the CERN Large Hadron Collider. The measurement is based on a data sample recorded with the ATLAS detector with an integrated luminosity of 0.30 pb^-1 for jets with transverse momentum between 25 and 70 GeV in the pseudorapidity range |eta| < 2.5. D*+/- mesons found in jets are fully reconstructed in the decay chain: D*+ -> D0pi+, D0 -> K-pi+, and its charge conjugate. The production rate is found to be N(D*+/-)/N(jet) = 0.025 +/- 0.001(stat.) +/- 0.004(syst.) for D*+/- mesons that carry a fraction z of the jet momentum in the range 0.3 < z < 1. Monte Carlo predictions fail to describe the data at small values of z, and this is most marked at low jet transverse momentum.Comment: 10 pages plus author list (22 pages total), 5 figures, 1 table, matches published version in Physical Review

Search for supersymmetry in final states with jets, missing transverse momentum and one isolated lepton in sqrt{s} = 7 TeV pp collisions using 1 fb-1 of ATLAS data

We present an update of a search for supersymmetry in final states containing jets, missing transverse momentum, and one isolated electron or muon, using 1.04 fb^-1 of proton-proton collision data at sqrt{s} = 7 TeV recorded by the ATLAS experiment at the LHC in the first half of 2011. The analysis is carried out in four distinct signal regions with either three or four jets and variations on the (missing) transverse momentum cuts, resulting in optimized limits for various supersymmetry models. No excess above the standard model background expectation is observed. Limits are set on the visible cross-section of new physics within the kinematic requirements of the search. The results are interpreted as limits on the parameters of the minimal supergravity framework, limits on cross-sections of simplified models with specific squark and gluino decay modes, and limits on parameters of a model with bilinear R-parity violation.Comment: 18 pages plus author list (30 pages total), 9 figures, 4 tables, final version to appear in Physical Review

Reducing heterotic M-theory to five dimensional supergravity on a manifold with boundary

This paper constructs the reduction of heterotic $M$-theory in eleven dimensions to a supergravity model on a manifold with boundary in five dimensions using a Calabi-Yau three-fold. New results are presented for the boundary terms in the action and for the boundary conditions on the bulk fields. Some general features of dualisation on a manifold with boundary are used to explain the origin of some topological terms in the action. The effect of gaugino condensation on the fermion boundary conditions leads to a `twist' in the chirality of the gravitino which can provide an uplifting mechanism in the vacuum energy to cancel the cosmological constant after moduli stabilisation.Comment: 16 pages, RevTe

Measurement of tau polarization in W->taunu decays with the ATLAS detector in pp collisions at sqrt(s) = 7 TeV

In this paper, a measurement of tau polarization in W->taunu decays is presented. It is measured from the energies of the decay products in hadronic tau decays with a single final state charged particle. The data, corresponding to an integrated luminosity of 24 pb^-1, were collected by the ATLAS experiment at the Large Hadron Collider in 2010. The measured value of the tau polarization is Ptau = -1.06 +/- 0.04 (stat) + 0.05 (syst) - 0.07 (syst), in agreement with the Standard Model prediction, and is consistent with a physically allowed 95% CL interval [-1,-0.91]. Measurements of tau polarization have not previously been made at hadron colliders.Comment: 10 pages plus author list (25 pages total), 4 figures, 4 tables, revised author list, matches published EPJC versio

RANTES/CCL5 and risk for coronary events: Results from the MONICA/KORA Augsburg case-cohort, Athero-express and CARDIoGRAM studies

Background: The chemokine RANTES (regulated on activation, normal T-cell expressed and secreted)/CCL5 is involved in the pathogenesis of cardiovascular disease in mice, whereas less is known in humans. We hypothesised that its relevance for atherosclerosis should be reflected by associations between CCL5 gene variants, RANTES serum concentrations and protein levels in atherosclerotic plaques and risk for coronary events. Methods and Findings: We conducted a case-cohort study within the population-based MONICA/KORA Augsburg studies. Baseline RANTES serum levels were measured in 363 individuals with incident coronary events and 1,908 non-cases (mean follow-up: 10.2±