A New Class of Materials Based on Nanoporous High Entropy Alloys with Outstanding Properties

Nanoporous metals with a random, bicontinuous structure of both pores and ligaments exhibit many unique mechanical properties, but their technical applications are often limited by their intrinsic brittleness under tensile strain triggered by fracture of the weakest ligaments. Here, we use molecular dynamics simulations to study the mechanical behavior and thermal stability of two different bicontinuous nanoporous high entropy alloys, Al0.1CoCrFeNi and NbMoTaW. To isolate the properties related to the nanoporous nature of our samples, we also studied the corresponding bulk and nanocrystalline systems. The results demonstrate that the specific modulus of nanoporous HEAs are 2 to 3 times greater than that of single element nanoporous materials with specific strength reaching values 5 to 10 times higher, comparable to bulk metals with the highest specific strength. Bicontinuous HEAs also displayed excellent resistance to thermal degradation as evidenced by the absence of coarsening ligaments up to temperatures of 1273 K which ensures the durability and reliability in high-temperature applications. The findings uncover unprecedented mechanical and thermal properties of bicontinuous nanoporous high entropy alloys, paving the way for their promising utilization in advanced engineering and structural applications

Sulfur-induced corrosion of Au(111) studied by real-time STM

The interaction of sulfur with gold surfaces has attracted considerable interest due to numerous technological applications such as the formation of self-assembled monolayers (SAMs), use as a corrosion inhibitor, and as a chemical sensor. In this work, the interaction of sulfur with Au(111) at two different temperatures (300 K and 420 K) was studied by real-time scanning tunneling microscopy (STM), low energy electron diffraction (LEED) and Auger electron spectroscopy (AES). In the low coverage regime (< 0.1 monolayer), S modifies the surface stress leading to a lateral expansion of the Au surface layer. An ordered ({radical}3 x {radical}3)R30{sup o} sulfur adlayer develops as the coverage reaches {approx}0.3 ML. With further increasing S coverage the Au(111) surface undergoes a dynamic rearrangement while forming a two-dimensional AuS phase: gold surface atoms are removed from regular terrace sites and incorporated into the growing gold sulfide phase resulting in the appearance of pits and irregularly shaped AuS islands. Gold sulfide prepared at room temperature exhibits short-range order; an incommensurate, long-range ordered AuS phase develops upon annealing at 450-525 K. Higher temperatures lead to decomposition of the AuS corrosion film. Formation of an ordered AuS phase via rapid step retraction rather than etch pit formation is observed during S-interaction with Au(111) surfaces at 420 K. Our results shed new light on the S-Au(111) interaction

Wall-thickness-dependent strength of nanotubular ZnO

We fabricate nanotubular ZnO with wall thickness of 45, 92, 123 nm using nanoporous gold (np-Au) with ligament diameter at necks of 1.43 mu m as sacrificial template. Through micro-tensile and micro-compressive testing of nanotubular ZnO structures, we find that the exponent m in (sigma) over bar proportional to (rho) over bar (m), where (sigma) over bar is the relative strength and (rho) over bar is the relative density, for tension is 1.09 and for compression is 0.63. Both exponents are lower than the value of 1.5 in the Gibson-Ashby model that describes the relation between relative strength and relative density where the strength of constituent material is independent of external size, which indicates that strength of constituent ZnO increases as wall thickness decreases. We find, based on hole-nanoindentation and glazing incidence X-ray diffraction, that this wall-thickness-dependent strength of nanotubular ZnO is not caused by strengthening of constituent ZnO by size reduction at the nanoscale. Finite element analysis suggests that the wall-thickness-dependent strength of nanotubular ZnO originates from nanotubular structures formed on ligaments of np-Au

Fusion Energy Output Greater than the Kinetic Energy of an Imploding Shell at the National Ignition Facility

A series of cryogenic, layered deuterium-tritium (DT) implosions have produced, for the first time, fusion energy output twice the peak kinetic energy of the imploding shell. These experiments at the National Ignition Facility utilized high density carbon ablators with a three-shock laser pulse (1.5 MJ in 7.5 ns) to irradiate low gas-filled (0.3  mg/cc of helium) bare depleted uranium hohlraums, resulting in a peak hohlraum radiative temperature ∼290  eV. The imploding shell, composed of the nonablated high density carbon and the DT cryogenic layer, is, thus, driven to velocity on the order of 380  km/s resulting in a peak kinetic energy of ∼21  kJ, which once stagnated produced a total DT neutron yield of 1.9×10¹⁶ (shot N170827) corresponding to an output fusion energy of 54 kJ. Time dependent low mode asymmetries that limited further progress of implosions have now been controlled, leading to an increased compression of the hot spot. It resulted in hot spot areal density (ρr∼0.3  g/cm²) and stagnation pressure (∼360  Gbar) never before achieved in a laboratory experiment

First High-Convergence Cryogenic Implosion in a Near-Vacuum Hohlraum

Recent experiments on the National Ignition Facility [M. J. Edwards et al., Phys. Plasmas 20, 070501 (2013)] demonstrate that utilizing a near-vacuum hohlraum (low pressure gas-filled) is a viable option for high convergence cryogenic deuterium-tritium (DT) layered capsule implosions. This is made possible by using a dense ablator (high-density carbon), which shortens the drive duration needed to achieve high convergence: a measured 40% higher hohlraum efficiency than typical gas-filled hohlraums, which requires less laser energy going into the hohlraum, and an observed better symmetry control than anticipated by standard hydrodynamics simulations. The first series of near-vacuum hohlraum experiments culminated in a 6.8 ns, 1.2 MJ laser pulse driving a 2-shock, high adiabat (α ~ 3.5) cryogenic DT layered high density carbon capsule. This resulted in one of the best performances so far on the NIF relative to laser energy, with a measured primary neutron yield of 1.8×10[superscript 15] neutrons, with 20% calculated alpha heating at convergence ~27×

Dislocation nucleation in bcc Ta single crystals studied by nanoindentation

The study of dislocation nucleation in closed-packed metals by nanoindentation has recently attracted much interest. Here, we address the peculiarities of the incipient plasticity in body centered cubic (bcc) metals using low index Ta single-crystals as a model system. The combination of nanoindentation with high-resolution atomic force microscopy provides us with experimental atomic-scale information on the process of dislocation nucleation and multiplication. Our results reveal a unique deformation behavior of bcc Ta at the onset of plasticity which is distinctly different from that of closed-packed metals. Most noticeable, we observe only one rather than a sequence of discontinuities in the load-displacement curves. This and other differences are discussed in context of the characteristic plastic deformation behavior of bcc metals

The forgotten smoker: a qualitative study of attitudes towards smoking, quitting, and tobacco control policies among continuing smokers

Although research suggests that the majority of smokers want to quit smoking, the uptake of Stop Smoking Services, designed to assist smokers with quitting, remains low. Little is known about continuing smokers who do not access these services, and opportunities to influence their motivation and encourage quit attempts through the uptake of services. Using PRIME theory, this study explored differences between continuing smokers who had varying levels of motivation to quit, in terms of their plans to quit, evaluative beliefs about smoking, cigarette dependence, and attitudes towards tobacco control policies and services

The economics of debt clearing mechanisms

We examine the evolution of decentralized clearinghouse mechanisms from the 13th to the 18th century; in particular, we explore the clearing of non- or limitedtradable debts like bills of exchange. We construct a theoretical model of these clearinghouse mechanisms, similar to the models in the theoretical matching literature, and show that specific decentralized multilateral clearing algorithms known as rescontre, skontrieren or virement des parties used by merchants were efficient in specific historical contexts. We can explain both the evolutionary self-organizing emergence of late medieval and early modern fairs, and its robustness during the 17th and 18th century

Selective Thermal Reduction of Single-layer MoO3 nanostructures on Au(111)

MoO{sub 3} is an interesting oxide prototype because its catalytic activity is sensitive to the presence and nature of defects. In this work, we demonstrate that we can control the number of defects in single-layer MoO{sub 3} nanostructures grown on Au(111) by a simple thermal reduction treatment. X-ray photoelectron spectroscopy demonstrates the formation of Mo{sup 5+} species and oxygen vacancies during annealing at 650 K. The percentage of Mo{sup 5+} increases with the duration of annealing, until a stable composition containing 50% Mo{sup 6+} and 50% Mo{sup 5+} is obtained. Surprisingly, the formation of lower oxidation states such as Mo{sup 4+} was not observed. The reduced MoO{sub x} islands remain one layer high, based on scanning tunneling microscope (STM) images. The two-dimensional nature of the reduced oxide nanocrystals may be due to a large barrier for structural reorganization and, thus, may account for the absence of Mo oxidation states lower than +5. Based on scanning tunneling microscopy images and density functional calculations, we propose that the formation of Mo{sup 5+} ions during annealing is not associated with formation of oxygen point defects, but can be attributed to the formation of extended one-dimensional shear defects. These reduced structures are useful for studying the dependence of reactivity on defect type, and present exciting possibilities for chemical sensors and other applications

Elevated plasma levels of cardiac troponin-I predict left ventricular systolic dysfunction in patients with myotonic dystrophy type 1:A multicentre cohort follow-up study

Objective: High sensitivity plasma cardiac troponin-I (cTnI) is emerging as a strong predictor of cardiac events in a variety of settings. We have explored its utility in patients with myotonic dystrophy type 1 (DM1). Methods: 117 patients with DM1 were recruited from routine outpatient clinics across three health boards. A single measurement of cTnI was made using the ARCHITECT STAT Troponin I assay. Demographic, ECG, echocardiographic and other clinical data were obtained from electronic medical records. Follow up was for a mean of 23 months. Results: Fifty five females and 62 males (mean age 47.7 years) were included. Complete data were available for ECG in 107, echocardiography in 53. Muscle Impairment Rating Scale score was recorded for all patients. A highly significant excess (p = 0.0007) of DM1 patients presented with cTnI levels greater than the 99th centile of the range usually observed in the general population (9 patients; 7.6%). Three patients with elevated troponin were found to have left ventricular systolic dysfunction (LVSD), compared with four of those with normal range cTnI (33.3% versus 3.7%; p = 0.001). Sixty two patients had a cTnI level < 5ng/L, of whom only one had documented evidence of LVSD. Elevated cTnI was not predictive of severe conduction abnormalities on ECG, or presence of a cardiac device, nor did cTnI level correlate with muscle strength expressed by Muscle Impairment Rating Scale score. Conclusions: Plasma cTnI is highly elevated in some ambulatory patients with DM1 and shows promise as a tool to aid cardiac risk stratification, possibly by detecting myocardial involvement. Further studies with larger patient numbers are warranted to assess its utility in this setting