Very high energy gamma-rays and the Hubble parameter

A new method, based on the absorption of very high-energy gamma-rays by the cosmic infrared background, is proposed to constrain the value of the Hubble constant. As this value is both fundamental for cosmology and still not very well measured, it is worth developing such alternative methods. Our lower limit at the 68% confidence level is H0 > 74 km/s/Mpc, leading, when combined with the HST results, to H0 ~ 76 km/s/Mpc. Interestingly, this value, which is significantly higher than the usually considered one, is in exact agreement with other independent approaches based on baryonic acoustic oscillations and X-ray measurements. Forthcoming data from the experiments HESS-2 and CTA should help improving those results. Finally, we briefly mention a plausible correlation between absorption by the extragalactic background light and the absence of observation of gamma-ray bursts (GRBs) at very high energies.Comment: Proc. of the 12th Marcel Grossmann meeting on general relativity. 3 pages, 1 figur

On designing observers for time-delay systems with nonlinear disturbances

This is the post print version of the article. The official published version can be obtained from the link below - Copyright 2002 Taylor & Francis LtdIn this paper, the observer design problem is studied for a class of time-delay nonlinear systems. The system under consideration is subject to delayed state and non-linear disturbances. The time-delay is allowed to be time-varying, and the non-linearities are assumed to satisfy global Lipschitz conditions. The problem addressed is the design of state observers such that, for the admissible time-delay as well as non-linear disturbances, the dynamics of the observation error is globally exponentially stable. An effective algebraic matrix inequality approach is developed to solve the non-linear observer design problem. Specifically, some conditions for the existence of the desired observers are derived, and an explicit expression of desired observers is given in terms of some free parameters. A simulation example is included to illustrate the practical applicability of the proposed theory.The work of Z. Wang was supported in part by the University of Kaiserslautern of Germany and the Alexander von Humboldt Foundation of Germany

The Sloan Lens ACS Survey. VIII. The relation between environment and internal structure of early-type galaxies

We study the relation between the internal structure of early-type galaxies and their environment using 70 strong gravitational lenses from the Sloan ACS Lens Survey. The Sloan database is used to determine two measures of overdensity of galaxies around each lens: the projected number density of galaxies inside the tenth nearest neighbor (\Sigma_{10}) and within a cone of radius one h^{-1} Mpc (D_1). Our main results are: 1) The average overdensity is somewhat larger than unity, consistent with lenses preferring overdense environments as expected for massive early-type galaxies (12/70 lenses are in known groups/clusters). 2) The distribution of overdensities is indistinguishable from that of "twin" non-lens galaxies selected from SDSS to have the same redshift and stellar velocity dispersion \sigma_*. Thus, within our errors, lens galaxies are an unbiased population, and the SLACS results can be generalized to the overall population of early-type galaxies. 3) Typical contributions from external mass distribution are no more than a few per cent, reaching 10-20% (~0.05-0.10 external convergence) only in the most extreme overdensities. 4) No significant correlation between overdensity and slope of the mass density profile of the lens is found. 5) Satellite galaxies (those with a more luminous companion) have marginally steeper mass density profiles than central galaxies (those without). This result suggests that tidal stripping may affect the mass structure of early-type galaxies down to kpc scales probed by strong lensing, when they fall into larger structures [ABRIDGED].Comment: ApJ, in press; minor changes with respect to v

The climate change response bill 2010: An assessment

Climate change is an important problem. It would be desirable to have legislation that would put Ireland on a low-cost and equitable trajectory to a zero-carbon economy. The draft Climate Change Response Bill 2010 will not achieve that. The exact emission reduction targets for 2020 are ambiguous, but considerably more ambitious than Ireland's obligations under EU legislation. EU legislation severely constrains the options for domestic climate policy so that the extra emission reduction would fall almost exclusively on agriculture, households, small and medium enterprises, and transport. The target in the draft bill for 2020 would require draconian policies. It would be better to keep the EU targets for 2020. The targets for 2030 and 2050 would require a further sharpening of climate policy. It would be better to base climate policy on predictably rising carbon prices. The draft bill fails to create a framework that would ensure that policy interventions are effective, as cheap as possible, and fair. Current policy meets none of these criteria. The Regulatory Impact Analysis is a collection of qualitative assertions that shed little light on the impact of the draft bill. The proposed National Climate Change Expert Advisory Body would need to acquire the appropriate expertise and be truly independent to fulfil its envisaged role

Hydrogen atom in a spherical well: linear approximation

We discuss the boundary effects on a quantum system by examining the problem of a hydrogen atom in a spherical well. By using an approximation method which is linear in energy we calculate the boundary corrections to the ground-state energy and wave function. We obtain the asymptotic dependence of the ground-state energy on the radius of the well.Comment: Revised version to appear in European Journal of Physic

An original constraint on the Hubble constant: h>0.74

The Hubble parameter H0 still not very well measured. Although the Hubble Key Project, Chandra and WMAP gave good estimates, the uncertainties remain quite large. In this brief report, we suggest an original and independent method to derive a lower limit on H0 using the absorption of very high energy gamma-rays by the cosmic infrared background. With conservative hypothesis, we obtain H0>74 km/s/Mpc at the 68% confidence level, which favors the upper end of the intervals allowed by dedicated experiments.Comment: 7 pages, 3 figures. Version accepted by MNRAS, minor changes, results unchange

Heterotic Computing Examples with Optics, Bacteria, and Chemicals

Unconventional computers can perform embodied computation that can directly exploit the natural dynamics of the substrate. But such in materio devices are often limited, special purpose machines. To be practically useful, unconventional devices are usually be combined with classical computers or control systems. However, there is currently no established way to do this, or to combine different unconventional devices. In this position paper we describe heterotic unconventional computation, an approach that focusses on combinations of unconventional devices. This will need a sound semantic framework defining how diverse unconventional computational devices can be combined in a way that respects the intrinsic computational power of each, whilst yielding a hybrid device that is capable of more than the sum of its parts. We also describe a suite of diverse physical implementations of heterotic unconventional computers, comprising computation performed by bacteria hosted in chemically built material, sensed and controlled optically and chemically.Ministerio de Ciencia e Innovación TIN2009–13192Ministerio de Ciencia e Innovación JCI-2010-0653

Information coding with frequency of oscillations in Belousov-Zhabotinsky encapsulated disks

Information processing with an excitable chemical medium, like the Belousov-Zhabotinsky (BZ) reaction, is typically based on information coding in the presence or absence of excitation pulses. Here we present a new concept of Boolean coding that can be applied to an oscillatory medium. A medium represents the logical TRUE state if a selected region oscillates with a high frequency. If the frequency fails below a specified value, it represents the logical FALSE state. We consider a medium composed of disks encapsulating an oscillatory mixture of reagents, as related to our recent experiments with lipid-coated BZ droplets. We demonstrate that by using specific geometrical arrangements of disks containing the oscillatory medium one can perform logical operations on variables coded in oscillation frequency. Realizations of a chemical signal diode and of a single-bit memory with oscillatory disks are also discussed. © 2014 American Physical Society

Submucosal diclofenac for acute postoperative pain in third molar surgery: A randomized, controlled clinical trial

Diclofenac sodium is a widely used nonsteroidal anti-inflammatory drug (NSAID) for relief of inflammatory pain. A recent formulation combines this drug with hydroxypropyl-β-cyclodextrin (HPβCD) to improve its solubility and to enable subcutaneous administration. Previous studies confirmed the efficacy of this combination. This study’s aim was to evaluate the efficacy, safety, and local tolerability of diclofenac HPβCD administered as a local submucosal injection prior to lower third molar surgery. We conducted a prospective, randomized, double-blind, placebo-controlled, parallel-group phase II single-center study. Seventy-five patients requiring mandibular third molar surgery were randomized into 1 of 5 groups: 5 mg/1 mL diclofenac HPβCD, 12.5 mg/1 mL diclofenac HPβCD, 25 mg/1 mL diclofenac HPβCD, 50 mg/1 mL diclofenac HPβCD, or 1 mL placebo. The respective study drug was injected into the mucosal tissue surrounding the surgical site prior to surgery following achievement of local anesthesia. The primary outcome measure was the area under the curve (AUC) of cumulative pain scores from end of surgery to 6 h postsurgery. This demonstrated a global treatment effect between the active groups and placebo, hence confirming the study drug’s efficacy (P = 0.0126). Secondary outcome measures included the time until onset of pain and the time until patients required rescue medication, both showing statistical significance of the study drug compared to placebo (P < 0.0161 and P < 0.0001, respectively). The time until rescue medication ranged between 7.8 h (for 25 mg/1 mL diclofenac HPβCD) and 16 h (for 50 mg/1 mL diclofenac HPβCD). Interestingly, the 5-mg/1-mL solution appeared superior to the 12.5-mg/1-mL and 25-mg/1-mL solutions (time until rescue medication = 12.44 h). A total of 14% of patients experienced minor adverse drug reactions (ADRs), of which 2 cases demonstrated flap necrosis. These resolved without further intervention. The study results overall indicate efficacy, safety, and relative tolerability of diclofenac HPβCD used locally as a submucosal injection prior to third molar surgery (ClinicalTrials.gov NCT01706588)