On analysis of chemical reactions coupled gas flows in SOFCs

This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.Solid oxide fuel cell (SOFC) is among others one of the most promising technologies for electricity energy generation. A recent new trends is to reduce its operating temperature from 1000oC to 800oC by employing a thick porous layer as the supporting structure. Various transport processes occurred are strongly affected by catalytic chemical/electrochemical reactions appearing in nano- or/and microstructured and multi-functional porous electrodes. It is particularly true if methane is used as the fuel, and internal reforming reactions within the microstructured porous anodes enable the conversion of the methane into H2 and CO. To deeply understand the chemical reaction coupled gas flow and heat transfer in the microstructured porous anode, a fully three-dimensional numerical calculation procedure (CFD) is developed and applied. The species mass/heat generation and consumption related to the internal reforming reactions and the electrochemical reaction have been identified and employed in the study. The variable thermalphysical properties and transport parameters of the fuel gas mixture have also been taken into account. Furthermore, the heat transfer due to the fuel gas flow is implemented into the energy balance based on multi-component diffusion models. Finally, various issues connecting to the micro models of the surface reactions are discussed and reviewed.Thi study is supported by the Swedish Research Council (VR) and the National Natural Science Foundation of China (NSFC-50706004)

A web of stakeholders and strategies: A case of broadband diffusion in South Korea

When a new technology is launched, its diffusion becomes an issue of importance. There are various stakeholders that influence diffusion. The question that remains to be determined is their identification and roles. This paper outlines how the strategies pursued by a government acting as the key stakeholder affected the diffusion of a new technology. The analysis is based on a theoretical framework derived from innovation diffusion and stakeholder theories. The empirical evidence comes from a study of broadband development in South Korea. A web of stakeholders and strategies is drawn in order to identify the major stakeholders involved and highlight their relations. The case of South Korea offers implications for other countries that are pursuing broadband diffusion strategies

Search for WW and WZ production in lepton plus jets final state at CDF

We present a search for WW and WZ production in final states that contain a charged lepton (electron or muon) and at least two jets, produced in sqrt(s) = 1.96 TeV ppbar collisions at the Fermilab Tevatron, using data corresponding to 1.2 fb-1 of integrated luminosity collected with the CDF II detector. Diboson production in this decay channel has yet to be observed at hadron colliders due to the large single W plus jets background. An artificial neural network has been developed to increase signal sensitivity, as compared with an event selection based on conventional cuts. We set a 95% confidence level upper limit of sigma_{WW}* BR(W->lnu,W->jets)+ sigma_{WZ}*BR(W->lnu,Z->jets)We present a search for WW and WZ production in final states that contain a charged lepton (electron or muon) and at least two jets, produced in √s=1.96  TeV pp̅ collisions at the Fermilab Tevatron, using data corresponding to 1.2  fb-1 of integrated luminosity collected with the CDF II detector. Diboson production in this decay channel has yet to be observed at hadron colliders due to the large single W plus jets background. An artificial neural network has been developed to increase signal sensitivity, as compared with an event selection based on conventional cuts. We set a 95% confidence level upper limit of σWW×BR(W→ℓνℓ,W→jets)+σWZ×BR(W→ℓνℓ,Z→jets)<2.88  pb, which is consistent with the standard model next-to-leading-order cross section calculation for this decay channel of 2.09±0.12  pb.Peer reviewe

Biomarker discovery and redundancy reduction towards classification using a multi-factorial MALDI-TOF MS T2DM mouse model dataset

Diabetes like many diseases and biological processes is not mono-causal. On the one hand multifactorial studies with complex experimental design are required for its comprehensive analysis. On the other hand, the data from these studies often include a substantial amount of redundancy such as proteins that are typically represented by a multitude of peptides. Coping simultaneously with both complexities (experimental and technological) makes data analysis a challenge for Bioinformatics

Current and Spin-Torque in Double Tunnel Barrier Ferromagnet - Superconductor - Ferromagnet Systems

We calculate the current and the spin-torque in small symmetric double tunnel barrier ferromagnet - superconductor - ferromagnet (F-S-F) systems. Spin-accumulation on the superconductor governs the transport properties when the spin-flip relaxation time is longer than the transport dwell time. In the elastic transport regime, it is demonstrated that the relative change in the current (spin-torque) for F-S-F systems equals the relative change in the current (spin-torque) for F-N-F systems upon changing the relative magnetization direction of the two ferromagnets. This differs from the results in the inelastic transport regime where spin-accumulation suppresses the superconducting gap and dramatically changes the magnetoresistance [S. Takahashi, H. Imamura, and S. Maekawa, Phys. Rev. Lett. 82, 3911 (1999)]. The experimental relevance of the elastic and inelastic transport regimes, respectively, as well as the reasons for the change in the transport properties are discussed.Comment: 7 page

Thermopower of the Correlated Narrow Gap Semiconductor FeSi and Comparison to RuSi

Iron based narrow gap semiconductors such as FeSi, FeSb2, or FeGa3 have received a lot of attention because they exhibit a large thermopower, as well as striking similarities to heavy fermion Kondo insulators. Many proposals have been advanced, however, lacking quantitative methodologies applied to this problem, a consensus remained elusive to date. Here, we employ realistic many-body calculations to elucidate the impact of electronic correlation effects on FeSi. Our methodology accounts for all substantial anomalies observed in FeSi: the metallization, the lack of conservation of spectral weight in optical spectroscopy, and the Curie susceptibility. In particular we find a very good agreement for the anomalous thermoelectric power. Validated by this congruence with experiment, we further discuss a new physical picture of the microscopic nature of the insulator-to-metal crossover. Indeed, we find the suppression of the Seebeck coefficient to be driven by correlation induced incoherence. Finally, we compare FeSi to its iso-structural and iso-electronic homologue RuSi, and predict that partially substituted Fe(1-x)Ru(x)Si will exhibit an increased thermopower at intermediate temperatures.Comment: 14 pages. Proceedings of the Hvar 2011 Workshop on 'New materials for thermoelectric applications: theory and experiment

Effects of boundary conditions on magnetization switching in kinetic Ising models of nanoscale ferromagnets

Magnetization switching in highly anisotropic single-domain ferromagnets has been previously shown to be qualitatively described by the droplet theory of metastable decay and simulations of two-dimensional kinetic Ising systems with periodic boundary conditions. In this article we consider the effects of boundary conditions on the switching phenomena. A rich range of behaviors is predicted by droplet theory: the specific mechanism by which switching occurs depends on the structure of the boundary, the particle size, the temperature, and the strength of the applied field. The theory predicts the existence of a peak in the switching field as a function of system size in both systems with periodic boundary conditions and in systems with boundaries. The size of the peak is strongly dependent on the boundary effects. It is generally reduced by open boundary conditions, and in some cases it disappears if the boundaries are too favorable towards nucleation. However, we also demonstrate conditions under which the peak remains discernible. This peak arises as a purely dynamic effect and is not related to the possible existence of multiple domains. We illustrate the predictions of droplet theory by Monte Carlo simulations of two-dimensional Ising systems with various system shapes and boundary conditions.Comment: RevTex, 48 pages, 13 figure

Implications of Recent Measurements of Hadronic Charmless B Decays

Implications of recent CLEO measurements of hadronic charmless B decays are discussed. (i) Employing the Bauer-Stech-Wirbel (BSW) model for form factors as a benchmark, the $B\to\pi^+\pi^-$ data indicate that the form factor $F_0^{B\pi}(0)$ is smaller than that predicted by the BSW model, whereas the data of $B\to\omega\pi, K^*\eta$ imply that the form factors $A_0^{B\omega}(0), A_0^{BK^*}(0)$ are greater than the BSW model's values. (ii) The tree-dominated modes $B\to\pi^+\pi^-, \rho^0\pi^\pm, \omega\pi^\pm$ imply that the effective number of colors N_c(LL) for (V-A)(V-A) operators is preferred to be smaller, while the current limit on $B\to\phi K$ shows that N_c(LR)>3. The data of $B\to K\eta'$ and $K^*\eta$ clearly indicate that $N_c(LR)\gg N_c(LL)$. (iii) In order to understand the observed suppression of $\pi^+\pi^-$ and non-suppression of $K\pi$ modes, both being governed by the form factor $F_0^{B\pi}$, the unitarity angle $\gamma$ is preferred to be greater than $90^\circ$. By contrast, the new measurement of $B^\pm\to\rho^0\pi^\pm$ no longer strongly favors $\cos\gamma<0$. (iv) The observed pattern K^-\pi^+\sim \ov K^0\pi^-\sim {2\over 3}K^-\pi^0 is consistent with the theoretical expectation: The constructive interference between electroweak and QCD penguin diagrams in the $K^-\pi^0$ mode explains why {\cal B}(B^-\to K^-\pi^0)>{1\over 2}{\cal B}(\ov B^0\to K^-\pi^+). (v) The observation \nc(LL)<3<\nc(LR) and our preference for \nc(LL)\sim 2 and \nc(LR)\sim 6 are justified by a recent perturbative QCD calculation of hadronic rare B decays in the heavy quark limit.Comment: 21 pages; CLEO measurements of several charmless B decay modes are updated. Discussion of the unitarity angle gamma in the \rho\pi mode is revise

A review of information flow diagrammatic models for product-service systems

A product-service system (PSS) is a combination of products and services to create value for both customers and manufacturers. Modelling a PSS based on function orientation offers a useful way to distinguish system inputs and outputs with regards to how data are consumed and information is used, i.e. information flow. This article presents a review of diagrammatic information flow tools, which are designed to describe a system through its functions. The origin, concept and applications of these tools are investigated, followed by an analysis of information flow modelling with regards to key PSS properties. A case study of selection laser melting technology implemented as PSS will then be used to show the application of information flow modelling for PSS design. A discussion based on the usefulness of the tools in modelling the key elements of PSS and possible future research directions are also presented