Acoustic emission analysis as a non-destructive test procedure for fiber compound structures

The concept of acoustic emission analysis is explained in scientific terms. The detection of acoustic events, their localization, damage discrimination, and event summation curves are discussed. A block diagram of the concept of damage-free testing of fiber-reinforced synthetic materials is depicted. Prospects for application of the concept are assessed

Analysis of noise measured from a propeller in a wake

In this experimental study, the acoustic characteristics of a propeller operating in a wake were studied. The propeller performance and noise were measured from two 0.25 scale propellers operating in an open jet anechoic flow environment with and without a wake. One propeller had NACA 16 series sections; the other, ARA-D. Wake thicknesses of 1 and 3 propeller chords were generated by an airfoil which spanned the full diameter of the propeller. The airfoil wake profiles were measured. Noise measurements were made in and out of the flow. The propellers were operated at 40, 83, and 100 inf of thrust. The acoustic data are analyzed, and the effects on the overall sound pressure level (OASPL) and scaled A weighted sound level L sub A with propeller thrust, wake thickness, and observer location are presented. The analysis showed that, generally, the wake increased the overall noise (OASPL) produced by the propeller; increased the harmonic content of the noise, thus the scaled L sub a; and produced an azimuthal dependence. With few exceptions, both propellers generally produced the same trends in delta OASPL and delta L sub a with thrust and wake thickness

The Elusive p-air Cross Section

For the \pbar p and $pp$ systems, we have used all of the extensive data of the Particle Data Group[K. Hagiwara {\em et al.} (Particle Data Group), Phys. Rev. D 66, 010001 (2002).]. We then subject these data to a screening process, the ``Sieve'' algorithm[M. M. Block, physics/0506010.], in order to eliminate ``outliers'' that can skew a $\chi^2$ fit. With the ``Sieve'' algorithm, a robust fit using a Lorentzian distribution is first made to all of the data to sieve out abnormally high \delchi, the individual i$^{\rm th}$ point's contribution to the total $\chi^2$. The $\chi^2$ fits are then made to the sieved data. We demonstrate that we cleanly discriminate between asymptotic $\ln s$ and $\ln^2s$ behavior of total hadronic cross sections when we require that these amplitudes {\em also} describe, on average, low energy data dominated by resonances. We simultaneously fit real analytic amplitudes to the ``sieved'' high energy measurements of $\bar p p$ and $pp$ total cross sections and $\rho$-values for $\sqrt s\ge 6$ GeV, while requiring that their asymptotic fits smoothly join the the $\sigma_{\bar p p}$ and $\sigma_{pp}$ total cross sections at $\sqrt s=$4.0 GeV--again {\em both} in magnitude and slope. Our results strongly favor a high energy $\ln^2s$ fit, basically excluding a $\ln s$ fit. Finally, we make a screened Glauber fit for the p-air cross section, using as input our precisely-determined $pp$ cross sections at cosmic ray energies.Comment: 15 pages, 6 figures, 2 table,Paper delivered at c2cr2005 Conference, Prague, September 7-13, 2005. Fig. 2 was missing from V1. V3 fixes all figure

Measurements of farfield sound generation from a flow-excited cavity

Results of 1/3-octave-band spectral measurements of internal pressures and the external acoustic field of a tangentially blown rectangular cavity are compared. Proposed mechanisms for sound generation are reviewed, and spectra and directivity plots of cavity noise are presented. Directivity plots show a slightly modified monopole pattern. Frequencies of cavity response are calculated using existing predictions and are compared with those obtained experimentally. The effect of modifying the upstream boundary layer on the noise was investigated, and its effectiveness was found to be a function of cavity geometry and flow velocity

REAPPORTIONMENT AND ITS IMPLICATIONS

Political Economy,

Adaptive Ising Model and Bacterial Chemotactic Receptor Network

We present a so-called adaptive Ising model (AIM) to provide a unifying explanation for sensitivity and perfect adaptation in bacterial chemotactic signalling, based on coupling among receptor dimers. In an AIM, an external field, representing ligand binding, is randomly applied to a fraction of spins, representing the states of the receptor dimers, and there is a delayed negative feedback from the spin value on the local field. This model is solved in an adiabatic approach. If the feedback is slow and weak enough, as indeed in chemotactic signalling, the system evolves through quasi-equilibrium states and the ``magnetization'', representing the signal, always attenuates towards zero and is always sensitive to a subsequent stimulus.Comment: revtex, final version to appear in Europhysics Letter

Noise response of cavities of varying dimensions at subsonic speeds

An expression for the Strouhal number of lengthwise cavity oscillations is obtained which includes the effect of length-to-depth ratio. This expression, which agrees well with the experimental data, is also used to predict the Mach number at which cavity acoustic response is maximum. Interaction between lengthwise and depthwise modes is seen to occur at Mach numbers from 0.1 to 0.5. Cavity shape is shown to affect the noise spectra in generating either a broadband or narrowband signal